{"title":"Jeep Cherokee","description":null,"products":[{"product_id":"for-2009-2014-jeep-cherokee-sport-kk-tpe-car-floor-mats","title":"Custom TPE All-Weather Floor Mats for 2009-2014 Jeep Cherokee Sport KK","description":"\u003ch2\u003eCustom TPE All-Weather Floor Mats for 2009-2014 Jeep Cherokee Sport KK\u003c\/h2\u003e\u003cp\u003ePrecision-engineered for the 2009-2014 Jeep Cherokee Sport KK using advanced 3D laser scanning, these custom TPE floor mats deliver a factory-matched fit with superior all-weather protection. Made from 100% recyclable, odorless Thermoplastic Elastomer (TPE), they shield your Jeep's interior from mud, water, salt, and trail debris.\u003c\/p\u003e\u003ch2\u003eWhy Choose AlchemyRide TPE Mats?\u003c\/h2\u003e\u003cul\u003e\n\u003cli\u003e✅ \u003cstrong\u003ePrecision Custom Fit:\u003c\/strong\u003e 3D laser-scanned for the Cherokee KK's exact footwells — no gaps, no shifting.\u003c\/li\u003e\n\u003cli\u003e✅ \u003cstrong\u003eTotal All-Weather Defense:\u003c\/strong\u003e Deep channels and raised edges trap water, mud, and debris.\u003c\/li\u003e\n\u003cli\u003e✅ \u003cstrong\u003eAnti-Slip Backing:\u003c\/strong\u003e Keeps mats securely in place during driving.\u003c\/li\u003e\n\u003cli\u003e✅ \u003cstrong\u003eEco-Friendly \u0026amp; Odorless:\u003c\/strong\u003e 100% recyclable TPE, free of PVC and toxic chemicals.\u003c\/li\u003e\n\u003cli\u003e✅ \u003cstrong\u003eEffortless Cleanup:\u003c\/strong\u003e Remove, rinse, wipe clean. Preserve your Jeep's factory interior.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch2\u003eProduct Specifications\u003c\/h2\u003e\u003ctable\u003e\n\u003ctr\u003e\n\u003cth\u003eFeature\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eMaterial\u003c\/td\u003e\n\u003ctd\u003ePremium TPE (Thermoplastic Elastomer)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFitment\u003c\/td\u003e\n\u003ctd\u003e2009–2014 Jeep Cherokee Sport KK\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eDesign\u003c\/td\u003e\n\u003ctd\u003eAll-Weather, Deep Channels, Anti-Skid Bottom, Odorless\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/table\u003e\u003cp\u003e\u003cstrong\u003eProtect your Jeep Cherokee's interior and preserve its value.\u003c\/strong\u003e Add to cart now.\u003c\/p\u003e","brand":"Alchemyride","offers":[{"title":"Default Title","offer_id":44854699819181,"sku":null,"price":135.0,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/2515\/3453\/files\/imgi_11_O1CN01y6usjt1O6xJLKoAty__2594571657-0-cib_jpg.webp?v=1756205479"},{"product_id":"512514-rear-wheel-hub-and-bearing-assembly-fit-for-2014-2022-jeep-cherokee-2015-2017-chrysler-200-fwd-only","title":"Rear Wheel Hub and Bearing Assembly for 14-22 Jeep Cherokee, 15-17 Chrysler 200","description":"\u003cul\u003e\n\u003cli\u003eCOMPATIBILITY - 512514 Wheel Hub assembly compatible with 2014-2022 Jeep Cherokee, 2015-2017 Chrysler 200. For details, use our vehicle selector or the fitment chart below to check compatibility.\u003c\/li\u003e\n\u003cli\u003eFEATURES - Fits FWD Models only, ABS System, Flange Diameter:130.2MM, Flange Offset:48.6MM, Bolt Circle Diameter:110.0MM, Replaces parts: 512514, BR930898, 68155868AB, 68155868AA\u003c\/li\u003e\n\u003cli\u003eQUALITY - This Wheel Bearing and Hub Assemblies has been quality tested to meet or exceed OEM performance standards\u003c\/li\u003e\n\u003cli\u003eINSTALLATION - Assembling has excellent performance, precise overall structure, easy and quick installation\u003c\/li\u003e\n\u003cli\u003eSERVICE\u0026amp;WARRANTY - Support replace, return, refund service and 5 year warranty. Please contact info@alchemyride.com if you need any assistance.\u003c\/li\u003e\n\u003c\/ul\u003e","brand":"Alchemyride","offers":[{"title":"Default Title","offer_id":47233060831405,"sku":"SA-512514","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/2515\/3453\/files\/61FxrTCUcGL.jpg?v=1786960242"},{"product_id":"power-steering-pump-for-1996-2001-jeep-cherokee-1997-2003-wrangler-4-0l-l6","title":"Power Steering Pump for 1996-2001 Jeep Cherokee, 1997-2003 Wrangler 4.0L L6","description":"\u003cp\u003e\u003c\/p\u003e","brand":"Alchemyride","offers":[{"title":"Default Title","offer_id":47233068433581,"sku":"SA-2038771","price":61.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/2515\/3453\/files\/1_3f12216c-a6e0-4ae2-9d87-32a2956747d7.jpg?v=1786960385"},{"product_id":"front-right-steering-knuckle-assembly-for-1990-2006-jeep","title":"Front Right (Passenger Side) Steering Knuckle for 1990-2006 Jeep Cherokee XJ, Wrangler TJ, Grand Cherokee ZJ, Comanche","description":"\u003ch2\u003eFront Right Steering Knuckle Assembly for 1990-2006 Jeep Cherokee, Wrangler TJ, Grand Cherokee \u0026amp; Comanche\u003c\/h2\u003e\n\u003cp\u003eA new front right (passenger side) steering knuckle assembly for a range of 1990-2006 Jeep models. It is built to OEM-equivalent specifications, 100% tested, and installs with standard automotive hand tools.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJeep Cherokee\u003c\/strong\u003e 1990-1993 4WD (231 or 242 Series transfer case)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJeep Cherokee\u003c\/strong\u003e 1991-1993 RWD with 4-wheel ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJeep Cherokee\u003c\/strong\u003e 1994-2001\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJeep Comanche\u003c\/strong\u003e 1990-1992 4WD (231 or 242 Series transfer case)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJeep Comanche\u003c\/strong\u003e 1991-1992 RWD\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJeep Grand Cherokee\u003c\/strong\u003e 1993-1998\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJeep Grand Wagoneer\u003c\/strong\u003e 1993\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJeep Wrangler TJ\u003c\/strong\u003e 1997-2006, all models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJeep Wagoneer\u003c\/strong\u003e 1990 (242 Series transfer case)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front right (passenger side)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 piece\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot for:\u003c\/strong\u003e the front left (driver side), or models and configurations not listed above\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment depends on drivetrain, transfer case and ABS. Confirm by VIN and compare your original knuckle before ordering.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart type:\u003c\/strong\u003e Front steering knuckle assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Right (passenger)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuality:\u003c\/strong\u003e New, OEM-equivalent, 100% tested\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eSafely raise and support the vehicle, then remove the front right wheel.\u003c\/li\u003e\n\u003cli\u003eRemove the brake caliper and rotor, ABS sensor if fitted, tie rod end and ball joint connections.\u003c\/li\u003e\n\u003cli\u003eRemove the original knuckle and transfer any hub, bearing or shields not included with the new part.\u003c\/li\u003e\n\u003cli\u003eInstall the new knuckle and torque all fasteners to factory specifications.\u003c\/li\u003e\n\u003cli\u003eHave a wheel alignment performed after installation.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit a 1991-1993 Cherokee RWD without ABS?\u003c\/strong\u003e The RWD listing requires 4-wheel ABS. Compare your original part first.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the Wrangler TJ?\u003c\/strong\u003e Yes. 1997-2006 TJ, all models, is listed.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs this sold as a pair?\u003c\/strong\u003e No. This listing is one front right (passenger side) knuckle.\u003c\/p\u003e","brand":"Alchemyride","offers":[{"title":"Default Title","offer_id":47233092452525,"sku":"SA-697923","price":71.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/2515\/3453\/files\/1_507fc79f-e8e2-43c8-a24f-903093de3af4.jpg?v=1786960750"},{"product_id":"front-left-steering-knuckle-assembly-for-1990-2006-jeep","title":"Front Left Steering Knuckle Assembly for Select Jeep Cherokee, Comanche, Grand Cherokee \u0026 TJ","description":"\u003ch2\u003eFront Left Steering Knuckle Assembly for Select Jeep Applications\u003c\/h2\u003e\u003cp\u003eFront driver-side \/ left steering-knuckle assembly application for the source-listed Jeep Cherokee, Comanche, Grand Cherokee, Grand Wagoneer, TJ, and Wagoneer configurations below. Fitment depends on drivetrain, transfer-case series, ABS configuration, and model year.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCritical fitment warning:\u003c\/strong\u003e This is not a universal 1990–2006 Jeep part. Confirm the VIN, exact model and year, front-left position, RWD\/2WD or 4WD drivetrain, front axle, 231 or 242 transfer case where specified, ABS type, original casting and reference number, hub bore, caliper mounts, ball-joint tapers, tie-rod location, dust-shield pattern, and all mounting dimensions before ordering.\u003c\/p\u003e\u003ch3\u003eSource-Listed Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1990–1993 Jeep Cherokee 4WD\u003c\/strong\u003e — with 231 Series or 242 Series transfer case\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1991–1993 Jeep Cherokee RWD\u003c\/strong\u003e — source also states 4-wheel ABS; verify this exact configuration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1994–2001 Jeep Cherokee\u003c\/strong\u003e — source states all models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1990–1992 Jeep Comanche 4WD\u003c\/strong\u003e — with 231 Series or 242 Series transfer case\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1991–1992 Jeep Comanche RWD\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1993–1998 Jeep Grand Cherokee\u003c\/strong\u003e — source states all models\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1993 Jeep Grand Wagoneer\u003c\/strong\u003e — source states all models\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1997–2006 Jeep TJ\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1990 Jeep Wagoneer\u003c\/strong\u003e — non-ABS with 242 Series transfer case\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1990 Jeep Wagoneer\u003c\/strong\u003e — with 231 Series transfer case; ABS requirement not separately clear in the source\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe source punctuation around the 1991–1993 Cherokee RWD and “4-Wheel ABS” wording is not fully clear. Treat 4-wheel ABS as a required verification item rather than assuming it applies to every Cherokee in the surrounding ranges.\u003c\/p\u003e\u003cp\u003eThe source explicitly lists TJ but does not separately name Wrangler. A Wrangler tag alone is not used to expand fitment beyond the source-listed TJ designation. Other Jeep models and configurations outside the list above are not confirmed.\u003c\/p\u003e\u003ch3\u003ePosition and Package Verification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAxle position:\u003c\/strong\u003e Front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSide:\u003c\/strong\u003e Left \/ driver side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e Steering-knuckle assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage quantity:\u003c\/strong\u003e Not separately itemized\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eABS sensor provisions:\u003c\/strong\u003e Not specified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub and bearing:\u003c\/strong\u003e Not separately confirmed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall joints:\u003c\/strong\u003e Not separately confirmed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake dust shield:\u003c\/strong\u003e Not separately confirmed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting hardware:\u003c\/strong\u003e Not confirmed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe term “assembly” does not confirm every attached component. The source does not separately itemize the steering-knuckle casting, hub and bearing, wheel studs, ABS sensor, tone ring, dust shield, ball joints, spindle, seals, snap rings, caliper bracket, axle nut, cotter pin, or mounting fasteners. Confirm the product images and received package before disassembly.\u003c\/p\u003e\u003ch3\u003eFitment Checks\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConfirm driver-side \/ front-left orientation from the steering arm, tie-rod location, caliper mounts, and sensor routing.\u003c\/li\u003e\n\u003cli\u003eVerify RWD\/2WD or 4WD configuration and the exact front axle design.\u003c\/li\u003e\n\u003cli\u003eIdentify the transfer case where the source requires 231 Series or 242 Series.\u003c\/li\u003e\n\u003cli\u003eConfirm ABS or non-ABS configuration, sensor mounting point, wiring route, connector, and tone-ring compatibility.\u003c\/li\u003e\n\u003cli\u003eCompare the hub bore, bearing interface, wheel-stud pattern, axle-shaft or spindle interface, and axle-nut arrangement.\u003c\/li\u003e\n\u003cli\u003eCompare upper and lower ball-joint tapers, tie-rod taper and direction, steering-stop design, and all mounting dimensions.\u003c\/li\u003e\n\u003cli\u003eVerify brake-caliper mounting-ear spacing, rotor size and offset, dust-shield pattern, and wheel clearance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eProfessional steering and suspension installation is strongly recommended. Safely support the vehicle and follow the exact model-, axle-, drivetrain-, ABS-, and front-left-specific service procedure. Steering, suspension, brake, and wheel-bearing components directly affect vehicle control.\u003c\/p\u003e\u003cp\u003eBefore installation, compare the replacement assembly with the original front-left part for casting, steering-arm direction, ball-joint tapers, tie-rod mounting direction, hub and bearing interface, axle opening, ABS provisions, caliper-ear dimensions, dust-shield holes, steering stops, and all offsets.\u003c\/p\u003e\u003cp\u003eInspect the wheel hub and bearing, axle shaft or spindle, CV joint where applicable, ball joints, tie-rod end, brake rotor and caliper, dust shield, ABS sensor and wiring, seals, cotter pins, and all mounting hardware. Replace damaged or manufacturer-designated single-use components as required.\u003c\/p\u003e\u003cp\u003eUse the vehicle manufacturer's procedures and torque specifications for ball-joint nuts, tie-rod hardware, hub and bearing fasteners, axle nut, caliper hardware, wheel fasteners, and all related components. Never use an impact tool to establish final bearing preload or axle-nut torque unless the service procedure specifically allows it.\u003c\/p\u003e\u003cp\u003eAfter installation, bleed the brake system if the hydraulic circuit was opened, verify ABS wiring and sensor clearance, and check wheel-bearing operation. Perform a wheel alignment and inspect steering-wheel position, toe, camber and caster where adjustable, brake operation, ABS warning lights, abnormal noise, and fastener security. Conduct the initial road test at low speed in a controlled area.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eIs this for the front-left side?\u003c\/strong\u003e\u003cbr\u003eYes. The source title identifies a front-left steering-knuckle assembly.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit every Jeep from 1990 through 2006?\u003c\/strong\u003e\u003cbr\u003eNo. Only the exact source-listed models and configurations above are supported.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this for 2WD\/RWD or 4WD?\u003c\/strong\u003e\u003cbr\u003eThe answer varies by model and year. Some Cherokee and Comanche applications are explicitly separated by 4WD and RWD, and some 4WD applications require a 231 or 242 transfer case.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it fit ABS vehicles?\u003c\/strong\u003e\u003cbr\u003eABS requirements vary. The source specifically mentions 4-wheel ABS near the 1991–1993 Cherokee RWD application and non-ABS for one 1990 Wagoneer configuration. Verify the original sensor and tone-ring system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the hub bearing and ball joints included?\u003c\/strong\u003e\u003cbr\u003eThe source does not separately itemize the hub, bearing, ball joints, ABS sensor, dust shield, or hardware. Confirm from the product images and received components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs alignment required?\u003c\/strong\u003e\u003cbr\u003eA wheel alignment should be performed after steering-knuckle replacement and corrected to the vehicle specifications.\u003c\/p\u003e","brand":"Alchemyride","offers":[{"title":"Default Title","offer_id":47233092976813,"sku":"SA-697922","price":69.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/2515\/3453\/files\/1_607bc629-8bef-4afd-9380-af1f3126d728.jpg?v=1786960752"},{"product_id":"front-steering-knuckle-assembly-for-1990-2006-jeep","title":"Front Steering Knuckle Assembly for Select Jeep Cherokee, Comanche, Grand Cherokee \u0026 TJ","description":"\u003ch2\u003eFront Steering Knuckle Assembly for Select Jeep Applications\u003c\/h2\u003e\u003cp\u003eFront steering-knuckle assembly application for the source-listed Jeep Cherokee, Comanche, Grand Cherokee, Grand Wagoneer, TJ, and Wagoneer configurations below. Fitment is highly dependent on drivetrain, transfer-case series, ABS configuration, and model year.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCritical fitment warning:\u003c\/strong\u003e This is not a universal 1990–2006 Jeep part. Steering knuckles can vary by front-left or front-right position, 2WD\/RWD or 4WD drivetrain, axle, 231 or 242 transfer case, ABS configuration, hub and bearing design, brake package, tie-rod and ball-joint tapers, and production date. Confirm the VIN, exact model and year, drivetrain, axle, transfer case, ABS type, original casting and reference number, side, hub bore, caliper mounts, ball-joint tapers, tie-rod location, dust-shield pattern, and all mounting dimensions before ordering.\u003c\/p\u003e\u003ch3\u003eSource-Listed Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e1990–1993 Jeep Cherokee 4WD\u003c\/strong\u003e — with 231 Series or 242 Series transfer case\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1991–1993 Jeep Cherokee RWD\u003c\/strong\u003e — source also states 4-wheel ABS; verify this exact configuration\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1994–2001 Jeep Cherokee\u003c\/strong\u003e — drivetrain, transfer case, and ABS details not further specified by the source\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1990–1992 Jeep Comanche 4WD\u003c\/strong\u003e — with 231 Series or 242 Series transfer case\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1991–1992 Jeep Comanche RWD\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1993–1998 Jeep Grand Cherokee\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1993 Jeep Grand Wagoneer\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e1997–2006 Jeep TJ\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1990 Jeep Wagoneer\u003c\/strong\u003e — non-ABS with 242 Series transfer case\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e1990 Jeep Wagoneer\u003c\/strong\u003e — with 231 Series transfer case; ABS requirement not separately clear in the source\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe source punctuation around the 1991–1993 Cherokee RWD and “4-Wheel ABS” wording is not fully clear. Treat 4-wheel ABS as a required verification item rather than assuming it applies to every Cherokee in the surrounding ranges.\u003c\/p\u003e\u003cp\u003eThe source explicitly lists TJ but does not separately name Wrangler. A Wrangler tag alone is not used to expand fitment beyond the source-listed TJ designation. Other Jeep models and configurations outside the list above are not confirmed.\u003c\/p\u003e\u003ch3\u003ePosition and Package Verification\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eExact side:\u003c\/strong\u003e Not specified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePackage quantity:\u003c\/strong\u003e Not specified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eABS sensor provisions:\u003c\/strong\u003e Not specified\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eHub and bearing:\u003c\/strong\u003e Not separately confirmed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBall joints:\u003c\/strong\u003e Not separately confirmed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrake dust shield:\u003c\/strong\u003e Not separately confirmed\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eMounting hardware:\u003c\/strong\u003e Not confirmed\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe dual-number SKU does not independently prove that front-left and front-right assemblies are both included or establish which number belongs to each side. Match the physical knuckle, steering arm, caliper ears, tie-rod location, and casting to the original component.\u003c\/p\u003e\u003cp\u003eThe term “assembly” does not confirm every attached component. The source does not separately itemize the steering knuckle casting, hub and bearing, wheel studs, ABS sensor, tone ring, dust shield, ball joints, spindle, seals, snap rings, caliper bracket, axle nut, cotter pin, or mounting fasteners. Confirm the product images and received package before disassembly.\u003c\/p\u003e\u003ch3\u003eFitment Checks\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eConfirm front-left or front-right orientation from the steering arm, tie-rod location, caliper mounts, and sensor routing.\u003c\/li\u003e\n\u003cli\u003eVerify RWD\/2WD or 4WD configuration and the exact front axle design.\u003c\/li\u003e\n\u003cli\u003eIdentify the transfer case where the source requires 231 Series or 242 Series.\u003c\/li\u003e\n\u003cli\u003eConfirm ABS or non-ABS configuration, sensor mounting point, wiring route, connector, and tone-ring compatibility.\u003c\/li\u003e\n\u003cli\u003eCompare the hub bore, bearing interface, wheel-stud pattern, axle-shaft or spindle interface, and axle-nut arrangement.\u003c\/li\u003e\n\u003cli\u003eCompare upper and lower ball-joint tapers, tie-rod taper and direction, steering-stop design, and all mounting dimensions.\u003c\/li\u003e\n\u003cli\u003eVerify brake-caliper mounting-ear spacing, rotor size and offset, dust-shield pattern, and wheel clearance.\u003c\/li\u003e\n\u003c\/ul\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eProfessional steering and suspension installation is strongly recommended. Safely support the vehicle and follow the exact model-, axle-, drivetrain-, ABS-, and side-specific service procedure. Steering, suspension, brake, and wheel-bearing components directly affect vehicle control.\u003c\/p\u003e\u003cp\u003eBefore installation, compare the replacement assembly with the original part for side orientation, casting, steering arm, ball-joint tapers, tie-rod mounting direction, hub and bearing interface, axle opening, ABS provisions, caliper-ear dimensions, dust-shield holes, steering stops, and all offsets. Do not assign sides from SKU order alone.\u003c\/p\u003e\u003cp\u003eInspect the wheel hub and bearing, axle shaft or spindle, CV joint where applicable, ball joints, tie-rod end, brake rotor and caliper, dust shield, ABS sensor and wiring, seals, cotter pins, and all mounting hardware. Replace damaged or manufacturer-designated single-use components as required.\u003c\/p\u003e\u003cp\u003eUse the vehicle manufacturer's procedures and torque specifications for ball-joint nuts, tie-rod hardware, hub and bearing fasteners, axle nut, caliper hardware, wheel fasteners, and all related components. Never use an impact tool to establish final bearing preload or axle-nut torque unless the service procedure specifically allows it.\u003c\/p\u003e\u003cp\u003eAfter installation, bleed the brake system if the hydraulic circuit was opened, verify ABS wiring and sensor clearance, and check wheel-bearing operation. Perform a wheel alignment and inspect steering-wheel position, toe, camber and caster where adjustable, brake operation, ABS warning lights, abnormal noise, and fastener security. Conduct the initial road test at low speed in a controlled area.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit every Jeep from 1990 through 2006?\u003c\/strong\u003e\u003cbr\u003eNo. Only the exact source-listed models and configurations above are supported.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs this for 2WD\/RWD or 4WD?\u003c\/strong\u003e\u003cbr\u003eThe answer varies by model and year. Some Cherokee and Comanche applications are explicitly separated by 4WD and RWD, and some 4WD applications require a 231 or 242 transfer case.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it fit ABS vehicles?\u003c\/strong\u003e\u003cbr\u003eABS requirements vary. The source specifically mentions 4-wheel ABS near the 1991–1993 Cherokee RWD application and non-ABS for one 1990 Wagoneer configuration. Verify the original sensor and tone-ring system.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs it front-left or front-right?\u003c\/strong\u003e\u003cbr\u003eThe source does not provide a verified side assignment. Compare the physical part with the original steering arm, caliper mounts, and sensor routing.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre both sides included?\u003c\/strong\u003e\u003cbr\u003ePackage quantity is not stated. A dual-number SKU does not independently prove that two assemblies are included.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre the hub bearing and ball joints included?\u003c\/strong\u003e\u003cbr\u003eThe source does not separately itemize the hub, bearing, ball joints, ABS sensor, dust shield, or hardware. Confirm from the product images and received components.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs alignment required?\u003c\/strong\u003e\u003cbr\u003eA wheel alignment should be performed after steering-knuckle replacement and corrected to the vehicle specifications.\u003c\/p\u003e","brand":"Alchemyride","offers":[{"title":"Default Title","offer_id":47233093173421,"sku":"SA-697922+697923","price":135.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/2515\/3453\/files\/1_ae2bb8da-9fb9-4023-86e5-21c646bfb9c0.jpg?v=1786960753"},{"product_id":"wheel-hub-and-bearing-assembly-for-2014-2023-jeep-cherokee-2015-2017-chrysler-200","title":"Wheel Bearing \u0026 Hub Assembly 512513, ABS, for 2014-2023 Jeep Cherokee (Select Front \u0026 Rear) \u0026 2015-2017 Chrysler 200 AWD Rear","description":"\u003ch2\u003eWheel Bearing \u0026amp; Hub Assembly 512513 for Jeep Cherokee \u0026amp; Chrysler 200\u003c\/h2\u003e\n\u003cp\u003eA new wheel bearing and hub assembly with ABS, replacing part number 512513. It fits specific front and rear positions on the 2014-2023 Jeep Cherokee and the rear of the 2015-2017 Chrysler 200 AWD. Fitment depends on the drivetrain, suspension and axle position, so check the list below carefully. It is quality tested to meet or exceed OEM performance standards.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eChrysler 200\u003c\/strong\u003e, 2015-2017, AWD, rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJeep Cherokee\u003c\/strong\u003e, 2014-2022, FWD with off-road suspension, front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJeep Cherokee\u003c\/strong\u003e, 2014-2023, AWD with off-road suspension, front\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJeep Cherokee\u003c\/strong\u003e, 2014-2023, AWD, rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJeep Cherokee\u003c\/strong\u003e, 2014 and 2019-2023, 4WD, rear\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot for:\u003c\/strong\u003e Cherokee front without off-road suspension, 2015-2018 Cherokee 4WD rear, Chrysler 200 FWD, or Chrysler 200 front\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eFitment varies by drivetrain, suspension package and axle position. Confirm by VIN and compare your original hub before ordering.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart type:\u003c\/strong\u003e Wheel bearing and hub assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eABS:\u003c\/strong\u003e Yes\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange diameter:\u003c\/strong\u003e 130.2 mm (5.13 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange offset:\u003c\/strong\u003e 48.6 mm (1.91 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt circle diameter:\u003c\/strong\u003e 110.1 mm (4.33 in)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaces part numbers:\u003c\/strong\u003e 512513, BR930899\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003col\u003e\n\u003cli\u003eSafely raise and support the vehicle, then remove the wheel.\u003c\/li\u003e\n\u003cli\u003eRemove the axle nut, brake caliper and rotor, and disconnect the ABS sensor.\u003c\/li\u003e\n\u003cli\u003eUnbolt and remove the original hub assembly.\u003c\/li\u003e\n\u003cli\u003eInstall the new hub, reconnect the ABS sensor and torque all fasteners, including the axle nut, to factory specifications.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the front of my Cherokee?\u003c\/strong\u003e Only with the off-road suspension, on FWD (2014-2022) or AWD (2014-2023) models.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the rear of a 2016 Cherokee 4WD?\u003c\/strong\u003e Not listed. For 4WD, the rear fits 2014 and 2019-2023 only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the Chrysler 200 FWD?\u003c\/strong\u003e No. Chrysler 200 AWD rear only.\u003c\/p\u003e","brand":"Alchemyride","offers":[{"title":"Default Title","offer_id":47233134690477,"sku":"SA-512513","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/2515\/3453\/files\/61JTzBC9XcL.jpg?v=1786961304"},{"product_id":"front-wheel-hub-and-bearing-assembly-for-2014-2023-jeep-cherokee-without-off-road-suspension","title":"Front Wheel Hub \u0026 Bearing Assembly for Jeep Cherokee KL 2014-2023, without Off-Road Suspension (ABS)","description":"\u003ch2\u003eFront Wheel Hub \u0026amp; Bearing Assembly for Jeep Cherokee KL (2014-2023)\u003c\/h2\u003e\n\u003cp\u003eA front hub and bearing assembly supplied as one sealed unit, so the bearing, hub flange and ABS sensor ring come pre-assembled and correctly preloaded rather than needing to be pressed together. A failing front bearing usually shows up as a hum or growl that rises with road speed and changes as the car is steered from side to side, sometimes with an ABS warning light if the sensor ring is damaged. Each assembly is quality tested to meet or exceed OEM performance standards.\u003c\/p\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJeep Cherokee\u003c\/strong\u003e 2014-2020, without Off Road Package\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJeep Cherokee\u003c\/strong\u003e 2021-2023, without Off Road Suspension\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front axle, fits either side\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 1 piece\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot for:\u003c\/strong\u003e Cherokees with the Off Road Package or Off Road Suspension, such as the Trailhawk, or the Grand Cherokee\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eOff-road equipped Cherokees use a different front hub. Confirm your suspension package by VIN, or match part number 513349 or Mopar 68141123AC against your existing hub, before ordering. Replacing hubs in pairs is good practice even when only one side is noisy.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eABS:\u003c\/strong\u003e Yes, for vehicles with an ABS system\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt circle diameter:\u003c\/strong\u003e 110.0 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange diameter:\u003c\/strong\u003e 129.9 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange offset:\u003c\/strong\u003e 41.9 mm\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eReplaces:\u003c\/strong\u003e 513349, HA590551, 68141123AC, 68141123AB\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandards:\u003c\/strong\u003e Quality tested to meet or exceed OEM performance standards\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eReplacement should be carried out by a qualified technician.\u003c\/li\u003e\n\u003cli\u003eThe assembly arrives pre-assembled, so no bearing press work is required.\u003c\/li\u003e\n\u003cli\u003eTorque the hub fasteners and axle nut to the vehicle's factory specifications.\u003c\/li\u003e\n\u003cli\u003eTake care not to damage the ABS sensor or its wiring during removal and refitting.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit a Cherokee Trailhawk?\u003c\/strong\u003e No. Cherokees with off-road suspension use a different hub.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit left or right?\u003c\/strong\u003e Either side of the front axle.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow many are included?\u003c\/strong\u003e One assembly. Order two if you are doing both front corners.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit the Grand Cherokee?\u003c\/strong\u003e No. This is for the Cherokee KL only.\u003c\/p\u003e","brand":"Alchemyride","offers":[{"title":"Default Title","offer_id":47233137115309,"sku":"SA-513349","price":49.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/2515\/3453\/files\/61OQqsrbWDL.jpg?v=1786961333"},{"product_id":"front-wheel-hub-bearing-assembly-for-1999-2006-jeep-wrangler-1999-2001-cherokee-2000-2006-tj","title":"Front Wheel Hub Bearing Assembly for 1999-2006 Jeep Wrangler, 1999-2001 Cherokee, 2000-2006 TJ","description":"\u003ch2\u003eFront Wheel Hub Bearing Assembly — 513158 (5-Lug, Non-ABS, Front) — 1999–2006 Jeep Wrangler (TJ) \/ 1999–2001 Jeep Cherokee (XJ)\u003c\/h2\u003e\n\u003cdiv style=\"background: #f8d7da; border: 1px solid #dc3545; padding: 12px 16px; border-radius: 4px; margin: 16px 0;\"\u003e\n\u003cstrong\u003e⚠️ NON-ABS VEHICLES ONLY:\u003c\/strong\u003e Hub 513158 is for Jeep Wrangler (TJ) and Cherokee (XJ) models \u003cstrong\u003ewithout ABS\u003c\/strong\u003e. ABS-equipped vehicles require a different front hub. Confirm your vehicle does not have ABS before ordering.\u003c\/div\u003e\n\u003cdiv style=\"background: #d1ecf1; border: 1px solid #17a2b8; padding: 12px 16px; border-radius: 4px; margin: 16px 0;\"\u003e\n\u003cstrong\u003eℹ️ WRANGLER TJ EXPLAINED — “TJ” IS THE WRANGLER GENERATION CODE:\u003c\/strong\u003e The Jeep Wrangler produced from 1997 to 2006 carries the platform code \u003cstrong\u003eTJ\u003c\/strong\u003e. This listing covers the \u003cstrong\u003eTJ-generation Wrangler from 1999 to 2006\u003c\/strong\u003e (model years 1997–1998 TJ may use a different hub — confirm via VIN). If your Wrangler is a 1999–2006 model, it is a TJ.\u003c\/div\u003e\n\u003cdiv style=\"background: #fff3cd; border: 1px solid #ffc107; padding: 12px 16px; border-radius: 4px; margin: 16px 0;\"\u003e\n\u003cstrong\u003e⚠️ JEEP OEM 53007449AC — NOTE ON SUFFIX:\u003c\/strong\u003e This hub replaces Jeep OEM \u003cstrong\u003e53007449AC\u003c\/strong\u003e. The “AC” suffix denotes a revised version of the 53007449 part family. If you are cross-referencing via 53007449 (no suffix, used on earlier Jeep XJ\/YJ\/TJ models), verify that your vehicle calls for the AC revision specifically. Confirm via your VIN or dealer parts catalog.\u003c\/div\u003e\n\u003cdiv style=\"background: #fff3cd; border: 1px solid #ffc107; padding: 12px 16px; border-radius: 4px; margin: 16px 0;\"\u003e\n\u003cstrong\u003e⚠️ SINGLE UNIT — Front Position (Left or Right):\u003c\/strong\u003e This listing is for \u003cstrong\u003eone (1) front wheel hub bearing assembly\u003c\/strong\u003e. For both front corners, order quantity 2 — or see our 2-piece set (SA-513158x2).\u003c\/div\u003e\n\u003ch2\u003eFull Vehicle Compatibility — Jeep TJ \/ XJ Platform (Non-ABS, Front Hub)\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003ePlatform Code\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eWrangler (TJ)\u003c\/td\u003e\n\u003ctd\u003eTJ\u003c\/td\u003e\n\u003ctd\u003e1999–2006\u003c\/td\u003e\n\u003ctd\u003eNon-ABS only. TJ is the round-headlight Wrangler generation. 1997–1998 TJ — confirm hub via VIN.\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJeep\u003c\/td\u003e\n\u003ctd\u003eCherokee\u003c\/td\u003e\n\u003ctd\u003eXJ\u003c\/td\u003e\n\u003ctd\u003e1999–2001\u003c\/td\u003e\n\u003ctd\u003eNon-ABS only. Final three years of XJ production (discontinued 2001).\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eConfirm model generation (TJ \/ XJ), exact year, and Non-ABS configuration before ordering. Contact us with your VIN for fitment verification.\u003c\/p\u003e\n\u003ch2\u003eJeep Wrangler Generation Reference\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eGeneration\u003c\/th\u003e\n\u003cth\u003ePlatform\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003cth\u003eNotes\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eYJ\u003c\/td\u003e\n\u003ctd\u003eYJ\u003c\/td\u003e\n\u003ctd\u003e1987–1995\u003c\/td\u003e\n\u003ctd\u003eSquare headlights — different hub\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eTJ (early)\u003c\/td\u003e\n\u003ctd\u003eTJ\u003c\/td\u003e\n\u003ctd\u003e1997–1998\u003c\/td\u003e\n\u003ctd\u003eRound headlights — confirm hub via VIN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003e\u003cstrong\u003eTJ (this listing)\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003eTJ\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e1999–2006\u003c\/strong\u003e\u003c\/td\u003e\n\u003ctd\u003e\u003cstrong\u003e513158 — SA-513158 — Non-ABS\u003c\/strong\u003e\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eJK\u003c\/td\u003e\n\u003ctd\u003eJK\u003c\/td\u003e\n\u003ctd\u003e2007–2018\u003c\/td\u003e\n\u003ctd\u003e5×127 bolt pattern — different hub (513272)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eJeep OEM Cross-Reference — 53007449AC\u003c\/h2\u003e\n\u003cp\u003eThis hub replaces Jeep\/Chrysler OEM \u003cstrong\u003e53007449AC\u003c\/strong\u003e and aftermarket reference BR930219. The “AC” suffix is a Chrysler revision code for the 53007449 part family. Verify fitment via 53007449AC in your Jeep dealer parts catalog.\u003c\/p\u003e\n\u003ch2\u003ePart Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e513158\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eSA-513158 (single unit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eReplaces OEM \/ Cross Reference\u003c\/td\u003e\n\u003ctd\u003e53007449AC (Jeep\/Chrysler OEM), BR930219, 513158\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eFront — Left or Right (single unit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003ctd\u003e\n\u003cstrong\u003eNon-ABS only\u003c\/strong\u003e (no ABS sensor ring)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLug Count\u003c\/td\u003e\n\u003ctd\u003e5 Lugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlange Diameter\u003c\/td\u003e\n\u003ctd\u003e6.04 in (153.4 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlange Offset\u003c\/td\u003e\n\u003ctd\u003e1.91 in (48.5 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e~4.83 kg (single unit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eJeep TJ Wrangler \u0026amp; XJ Cherokee Non-ABS Front Hub:\u003c\/strong\u003e 513158 covers the front hub position for the 1999–2006 Wrangler TJ and 1999–2001 Cherokee XJ — both Non-ABS configurations on Jeep’s Dana solid front axle 4WD architecture.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eJeep OEM 53007449AC:\u003c\/strong\u003e Direct replacement for the revised AC-suffix OEM. Verify via 53007449AC in your dealer parts catalog.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Equivalent Quality:\u003c\/strong\u003e Tested to meet or exceed OEM performance standards for load rating and bearing durability. Sealed design minimizes noise and vibration.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Assembly:\u003c\/strong\u003e Pre-assembled hub and bearing — no press-fit required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProfessional installation recommended for Jeep Dana solid front axle hub replacement.\u003c\/li\u003e\n\u003cli\u003eConfirm Non-ABS configuration before installation. Confirm your Wrangler is a TJ (1999–2006) and not a YJ or early TJ (1997–1998).\u003c\/li\u003e\n\u003cli\u003eCherokee XJ buyers: confirm your model year is 1999–2001. XJ production ended in 2001.\u003c\/li\u003e\n\u003cli\u003eFor both front corners, order quantity 2 or see our 2-piece set (SA-513158x2) for better value.\u003c\/li\u003e\n\u003cli\u003eTorque all fasteners to OEM specification per Jeep Wrangler TJ \/ Cherokee XJ service manual.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Single unit, front position. 513158, 5-lug, Non-ABS, 6.04in flange. Jeep OEM 53007449AC. Fits 1999–2006 Jeep Wrangler TJ (Non-ABS) and 1999–2001 Jeep Cherokee XJ (Non-ABS). Not for ABS-equipped models. Not for YJ or 1997–1998 TJ (confirm via VIN). Not for 2007+ JK Wrangler. For both corners, see 2-piece set SA-513158x2.\u003c\/p\u003e\n\u003cdiv class=\"quick-specs\"\u003e\n\u003cstrong\u003eQuick Specs:\u003c\/strong\u003e Front Hub Single | 513158 | Jeep TJ\/XJ | 5-Lug | NON-ABS ONLY | Wrangler TJ 1999-2006 + Cherokee XJ 1999-2001 | Flange 6.04in | Jeep OEM 53007449AC | NOT ABS | NOT JK | AlchemyRide\u003c\/div\u003e","brand":"Alchemyride","offers":[{"title":"Default Title","offer_id":47233240694957,"sku":"SA-513158","price":40.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/2515\/3453\/files\/61sUs17IyZL.jpg?v=1786962401"},{"product_id":"front-wheel-hub-bearing-assembly-for-2005-2010-jeep-grand-cherokee-commander","title":"Front Wheel Hub Bearing Assembly for 2005-2010 Jeep Grand Cherokee\/Commander","description":"\u003ch2\u003eFront Wheel Hub \u0026amp; Bearing Assembly — OE# 513234\u003c\/h2\u003e\n\u003cp\u003eRestore dependable front wheel performance on your 2005–2010 Jeep Grand Cherokee or 2006–2010 Jeep Commander with this direct-fit front wheel hub and bearing assembly. Engineered to meet or exceed OEM performance standards, it delivers smooth, noise-free operation with a precise fit and no modification required.\u003c\/p\u003e\n\u003ch2\u003eFitment\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e2005–2010 Jeep Grand Cherokee\u003c\/li\u003e\n\u003cli\u003e2006–2010 Jeep Commander\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eSpecifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpec\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eOE Part Number\u003c\/td\u003e\n\u003ctd\u003e513234\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eCross References\u003c\/td\u003e\n\u003ctd\u003eBR930634, HA590036, 52089434AD\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eFront Axle\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLug Count\u003c\/td\u003e\n\u003ctd\u003e5 Lugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003ctd\u003eWith ABS\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlange Offset\u003c\/td\u003e\n\u003ctd\u003e2.04 IN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlange Diameter\u003c\/td\u003e\n\u003ctd\u003e6.48 IN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBolt Circle Diameter\u003c\/td\u003e\n\u003ctd\u003e5.0 IN\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e✅ \u003cstrong\u003eOEM-Grade Quality:\u003c\/strong\u003e Tested to meet or exceed original equipment performance standards.\u003c\/li\u003e\n\u003cli\u003e✅ \u003cstrong\u003eJeep-Specific Fitment:\u003c\/strong\u003e Engineered for Grand Cherokee and Commander front axle.\u003c\/li\u003e\n\u003cli\u003e✅ \u003cstrong\u003eABS Compatible:\u003c\/strong\u003e Maintains full ABS system functionality.\u003c\/li\u003e\n\u003cli\u003e✅ \u003cstrong\u003eDirect Fit:\u003c\/strong\u003e No modification required for installation.\u003cbr\u003e\n\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eFrequently Asked Questions\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this fit both the Grand Cherokee and Commander?\u003c\/strong\u003e Yes — compatible with 2005–2010 Grand Cherokee and 2006–2010 Commander.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDoes this replace OE part 52089434AD?\u003c\/strong\u003e Yes — direct replacement for 513234, BR930634, HA590036, and 52089434AD.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eRestore front wheel bearing performance on your Jeep Grand Cherokee or Commander.\u003c\/strong\u003e Add to cart now.\u003c\/p\u003e","brand":"Alchemyride","offers":[{"title":"Default Title","offer_id":47233254228141,"sku":"SA-513234","price":54.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/2515\/3453\/files\/front-wheel-hub-bearing-assembly-for-2005-2010-jeep-grand-cherokee-commander.jpg?v=1786962612"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/2515\/3453\/collections\/imgi_35_iris.png?v=1791944619","url":"https:\/\/alchemyride.com\/collections\/jeep-cherokee.oembed","provider":"Alchemyride","version":"1.0","type":"link"}