{"title":"Nissan Murano","description":null,"products":[{"product_id":"power-steering-pump-for-2007-2012-nissan-altima-3-5l-v6-2009-2014-maxima-murano","title":"Power Steering Pump for 2007-2012 Nissan Altima 3.5L \u0026 2009-2014 Maxima Murano","description":"\u003ch2\u003ePower Steering Pump for Nissan Altima, Maxima, and Murano\u003c\/h2\u003e\u003cp\u003eReplacement power steering pump for the specific Nissan applications listed below.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCritical fitment warning:\u003c\/strong\u003e Altima fitment is explicitly limited to the 3.5L V6. The source does not state engine, FWD\/AWD, trim, production date, or hydraulic-system restrictions for Maxima and Murano. It also does not provide reference numbers or confirm pulley diameter and groove count, shaft type, pressure and return port locations, pressure-switch or sensor provision, or mounting configuration. Confirm the VIN, engine, drivetrain, original pump number, pulley, ports, connectors, hose fittings, shaft, and mounting points before ordering. Verify that the vehicle uses a compatible hydraulic power steering pump rather than a different steering-assist system.\u003c\/p\u003e\u003ch3\u003eVehicle Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2007–2012 Nissan Altima\u003c\/strong\u003e — 3.5L V6 only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2009–2014 Nissan Maxima\u003c\/strong\u003e — engine and configuration restrictions not provided by source\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2009–2014 Nissan Murano\u003c\/strong\u003e — engine and FWD\/AWD restrictions not provided by source\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eAltima models with engines other than the 3.5L V6 are not confirmed. For Maxima and Murano, model year alone should not be used for final fitment verification.\u003c\/p\u003e\u003ch3\u003ePackage Contents\u003c\/h3\u003e\u003cp\u003eOne power steering pump. Pulley, reservoir, cap, mounting bracket, pressure switch or sensor, hoses, O-rings, seals, mounting bolts, drive belt, and power steering fluid are not confirmed unless shown in the product images. Compare the supplied pump with the original before installation.\u003c\/p\u003e\u003ch3\u003eCommon Power Steering Symptoms\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003eWhining or groaning that changes with steering input\u003c\/li\u003e\n\u003cli\u003eHeavy or inconsistent steering effort\u003c\/li\u003e\n\u003cli\u003eFluid leakage around the pump, shaft, reservoir, or hoses\u003c\/li\u003e\n\u003cli\u003eFoaming fluid or repeated air entering the system\u003c\/li\u003e\n\u003cli\u003ePulley wobble, bearing noise, or belt-tracking problems\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eSimilar symptoms may be caused by low or incorrect fluid, leaking hoses, a restricted reservoir screen, belt or tensioner problems, trapped air, steering-rack faults, or damaged steering components. Diagnose the complete system before replacing the pump.\u003c\/p\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eSteering-system work is safety-critical and professional installation is recommended. Identify and repair the cause of the original failure, inspect the reservoir and hoses for contamination or restrictions, and flush the system according to Nissan service information where required. Transfer the pulley only with the correct installer and remover; hammering or pressing against the pump shaft can cause damage. Replace required seals and O-rings, use only the vehicle-specified fluid, and follow Nissan torque specifications. Bleed the system without holding the steering against either stop, then check fluid level, belt alignment, steering assist, abnormal noise, and leaks.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit a 2.5L Altima?\u003c\/strong\u003e\u003cbr\u003eNot confirmed. The source limits Altima fitment to the 3.5L V6.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre Maxima and Murano engine restrictions known?\u003c\/strong\u003e\u003cbr\u003eNo. The source provides only the model-year ranges. Verify the VIN and match the original pump and hydraulic connections.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the pulley included?\u003c\/strong\u003e\u003cbr\u003eNot confirmed. Review the product images and compare the package contents with the original pump.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the reservoir included?\u003c\/strong\u003e\u003cbr\u003eNot confirmed. The reservoir, cap, hoses, and fluid are not listed as included.\u003c\/p\u003e","brand":"Alchemyride","offers":[{"title":"Default Title","offer_id":47233094582445,"sku":"SA-215485","price":67.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/2515\/3453\/files\/1_3aee5bf3-7766-4580-a75d-5d00a69d8bf8.jpg?v=1786960785"},{"product_id":"rear-disc-brake-caliper-for-2003-2005-infiniti-2003-2009-nissan","title":"Rear Disc Brake Caliper Pair, Left \u0026 Right, for 2003-2005 Infiniti G35, Nissan 350Z, 2003-2007 Murano \u0026 2004-2009 Quest","description":"\u003ch2\u003eRear Disc Brake Caliper Pair for Infiniti G35, Nissan 350Z, Murano \u0026amp; Quest\u003c\/h2\u003e\n\u003cp\u003eA pair of new rear disc brake calipers, driver and passenger side, for the Infiniti G35, Nissan 350Z, Murano and Quest. They are manufactured to OE specifications under ISO quality standards and factory tested for reliability, durability and performance.\u003c\/p\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x rear left (driver side) brake caliper\u003c\/li\u003e\n\u003cli\u003e1 x rear right (passenger side) brake caliper\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eInfiniti\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003eG35, 2003-2005\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNissan\u003c\/strong\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cli\u003e350Z (years not specified in the source listing, confirm by VIN)\u003c\/li\u003e\n\u003cli\u003eMurano, 2003-2007\u003c\/li\u003e\n\u003cli\u003eQuest, 2004-2009\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear left and rear right\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot for:\u003c\/strong\u003e models with factory performance or upgraded brake packages, or front brakes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eBrake systems can vary by trim and package. Confirm by VIN and compare the part numbers on your original calipers before ordering.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart type:\u003c\/strong\u003e Rear disc brake caliper\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 2 pieces (left and right)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e OE specifications, ISO quality standards, factory tested\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eProfessional installation is recommended. After replacement, test the brakes in a safe, empty area before driving on the road.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSafely raise and support the vehicle, then remove the rear wheels.\u003c\/li\u003e\n\u003cli\u003eDisconnect the brake hose, then unbolt and remove the old caliper.\u003c\/li\u003e\n\u003cli\u003eInstall the new caliper on the correct side and reconnect the brake hose with new crush washers.\u003c\/li\u003e\n\u003cli\u003eBleed the brake system, check the parking brake, and torque all fasteners to factory specifications.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs it sold as a pair?\u003c\/strong\u003e Yes. You receive the rear left and rear right calipers.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDoes it fit models with upgraded performance brakes?\u003c\/strong\u003e No. Standard brake models only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eAre brake pads included?\u003c\/strong\u003e Not listed. Only the calipers are listed in the package.\u003c\/p\u003e","brand":"Alchemyride","offers":[{"title":"Default Title","offer_id":47233103429805,"sku":"SA-19B2792+19B2793","price":85.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/2515\/3453\/files\/19B2792_19B2793-rear-disc-brake-caliper-for-2003-2005-infiniti-2003-2009-nissan_1_1-main.jpg?v=1789985239"},{"product_id":"2pcs-front-complete-struts-shock-absorber-for-2003-2007-nissan-murano","title":"Front Complete Strut \u0026 Coil Spring Assembly Pair (2 Pcs) for 2003-2007 Nissan Murano","description":"\u003ch2\u003eFront Complete Strut \u0026amp; Coil Spring Assembly Pair for 2003-2007 Nissan Murano\u003c\/h2\u003e\n\u003cp\u003eA pair of new front complete strut and coil spring assemblies for the first-generation 2003-2007 Nissan Murano, left and right side. They are manufactured to OE specifications under ISO quality standards, with a high-strength steel body and upgraded corrosion protection, and are factory tested for reliability, durability and performance.\u003c\/p\u003e\n\u003ch3\u003eWhat's included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e1 x front left complete strut and coil spring assembly\u003c\/li\u003e\n\u003cli\u003e1 x front right complete strut and coil spring assembly\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFitment\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNissan Murano\u003c\/strong\u003e, 2003-2007\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Front left and front right\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNot for:\u003c\/strong\u003e the 2009+ Murano, or rear suspension\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eSuspension can vary by drivetrain and trim. Confirm by VIN before ordering.\u003c\/strong\u003e\u003c\/p\u003e\n\u003ch3\u003eSpecifications\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePart type:\u003c\/strong\u003e Complete strut and coil spring assembly\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eQuantity:\u003c\/strong\u003e 2 pieces (left and right)\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBody:\u003c\/strong\u003e High-strength steel with upgraded corrosion protection\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eStandard:\u003c\/strong\u003e OE specifications, ISO quality standards, factory tested\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation\u003c\/h3\u003e\n\u003cp\u003eProfessional installation is recommended. After replacement, test the vehicle in a safe, empty area before driving on the road.\u003c\/p\u003e\n\u003col\u003e\n\u003cli\u003eSafely raise and support the vehicle, then remove the front wheels.\u003c\/li\u003e\n\u003cli\u003eDisconnect the sway bar link and any brake line or ABS brackets, then unbolt the strut from the knuckle and the upper mount.\u003c\/li\u003e\n\u003cli\u003eInstall the new complete strut assembly. No spring compressor is needed.\u003c\/li\u003e\n\u003cli\u003eTorque all fasteners to factory specifications and get a wheel alignment.\u003c\/li\u003e\n\u003c\/ol\u003e\n\u003ch3\u003eFAQ\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eIs the coil spring included?\u003c\/strong\u003e Yes. Each unit is a complete strut and coil spring assembly.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it sold as a pair?\u003c\/strong\u003e Yes. You receive the front left and front right.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eDo I need an alignment?\u003c\/strong\u003e Yes. Get a wheel alignment after installation.\u003c\/p\u003e","brand":"Alchemyride","offers":[{"title":"Default Title","offer_id":47233125089453,"sku":"SA-172268+172267","price":169.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/2515\/3453\/files\/1_8ba5f40c-d11e-464d-8fa4-2ef0b3fac65a.jpg?v=1786961169"},{"product_id":"engine-valve-cover-kit-for-2014-2021-infiniti-2013-2016-nissan","title":"Engine Valve Cover for Infiniti QX60, Nissan Altima, Murano, Pathfinder \u0026 Rogue","description":"\u003ch2\u003eEngine Valve Cover for Selected Infiniti and Nissan Applications\u003c\/h2\u003e\u003cp\u003eReplacement engine valve cover for the exact Infiniti and Nissan model-year applications listed below. The supplied information includes four reference-number formats for comparison with the original part.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCritical fitment warning:\u003c\/strong\u003e Valve covers can vary by engine displacement and code, production date, gasoline or hybrid powertrain, emissions package, crankcase-ventilation design, ignition-coil layout, hose and sensor connections, and gasket profile. The source does not provide engine size or code. Confirm the VIN, exact engine and powertrain, production date, original cover shape, PCV layout, port locations, mounting pattern, gasket channel, and every reference number before ordering.\u003c\/p\u003e\u003ch3\u003eInfiniti Compatibility\u003c\/h3\u003e\u003cul\u003e\u003cli\u003e\u003cstrong\u003e2014–2021 Infiniti QX60\u003c\/strong\u003e\u003c\/li\u003e\u003c\/ul\u003e\u003ch3\u003eNissan Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\u003cstrong\u003e2013–2017 Nissan Altima\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e2016 Nissan Murano\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e2014–2015 Nissan Pathfinder\u003c\/strong\u003e\u003c\/li\u003e\n\u003cli\u003e\u003cstrong\u003e2014–2016 Nissan Rogue\u003c\/strong\u003e\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003e\u003cstrong\u003eSource-title correction:\u003c\/strong\u003e The supplied title ends the Nissan range at 2016, but the detailed source fitment lists the Nissan Altima through 2017. This listing follows the detailed source data.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eNot confirmed:\u003c\/strong\u003e Every engine offered within these model years, four-cylinder versus V6 interchange, gasoline versus hybrid applications, engine-code interchange, market-specific variants, unlisted years or models, or any engine whose cover, PCV system, ports, coil layout, gasket channel, or mounting pattern differs.\u003c\/p\u003e\u003ch3\u003eProduct Specifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eProduct type:\u003c\/strong\u003e Engine valve cover\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eLocation:\u003c\/strong\u003e Top of engine \/ cylinder head\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eSource-listed makes:\u003c\/strong\u003e Infiniti and Nissan\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe source does not state the cover material, color, engine displacement, engine code, cylinder count, bank position, exact PCV construction, oil-fill-cap inclusion, sensor provisions, port sizes, or production-date splits. Do not infer those specifications from the SKU or broad vehicle ranges.\u003c\/p\u003e\u003ch3\u003ePackage Contents\u003c\/h3\u003e\u003cul\u003e\u003cli\u003eEngine valve cover component or kit; exact included contents and quantity not specified\u003c\/li\u003e\u003c\/ul\u003e\u003cp\u003eThe source does not explicitly itemize a valve-cover gasket, spark-plug-tube seals, bolt grommets, mounting bolts, oil filler cap, PCV valve or diaphragm, breather fittings, hoses, clamps, sensors, sealant, or installation tools. The original wording mentions replacing a cover and gasket as a repair scenario, but that does not confirm a gasket is packaged. Verify the product images and received contents before disassembly.\u003c\/p\u003e\u003ch3\u003eReference Numbers\u003c\/h3\u003e\u003cp\u003e13264-3TA0A, 13264-3KY0A, 132643TA0A, 132643KY0A\u003c\/p\u003e\u003cp\u003eReferences are retained exactly as supplied. Hyphenated and non-hyphenated formats may represent the same numbering style, but they are shown separately because the source lists both. A matching number does not override engine, hybrid, production-date, PCV, port-layout, gasket, or mounting differences.\u003c\/p\u003e\u003ch3\u003eWhen to Inspect the Original Cover\u003c\/h3\u003e\u003cp\u003ePossible signs of a valve-cover or sealing-system problem include visible oil leakage around the cover, oil near ignition components or spark-plug wells, a burning-oil odor, smoke caused by oil contacting hot surfaces, crankcase-ventilation faults, or rough operation. These symptoms can also result from other engine, ignition, sealing, or ventilation problems. Diagnose the vehicle before replacing parts.\u003c\/p\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eProfessional installation is recommended. Work only on a cool engine and follow the VIN-, engine-, and powertrain-specific service procedure. On hybrid-equipped vehicles, follow all applicable high-voltage safety procedures and have qualified personnel perform work near high-voltage components.\u003c\/p\u003e\u003cp\u003eBefore installation, compare the replacement with the original cover for overall shape, bolt pattern, gasket channel, oil-fill opening, coil openings, PCV and breather ports, hose connections, sensor provisions, and mounting heights. Do not install a cover with different ventilation routing, missing ports, or mismatched sealing surfaces.\u003c\/p\u003e\u003cp\u003eClean the cylinder-head sealing surface without scratching it or allowing debris to enter the engine. Remove old gasket material and oil from the sealing area. Use only the gasket, sealant locations, tightening sequence, and torque values specified for the exact engine. Excess sealant can enter oil passages, while overtightening can crack or distort the cover and create leaks.\u003c\/p\u003e\u003cp\u003eInspect ignition-coil wells, hoses, fittings, sensors, fasteners, and sealing surfaces during service. After installation, start the engine and inspect for oil or vacuum leaks, warning lights, abnormal noise, and correct crankcase-ventilation operation. Recheck the sealing perimeter after the engine reaches operating temperature and after an initial drive.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eWhich engine does this fit?\u003c\/strong\u003e\u003cbr\u003eThe source lists models and years but no engine displacement or code. Confirm the VIN, engine code, powertrain, original cover, PCV layout, and reference numbers.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eIs the valve-cover gasket included?\u003c\/strong\u003e\u003cbr\u003eThe source does not explicitly itemize a gasket as included. Verify the product images and received package.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it fit hybrid QX60 or Pathfinder models?\u003c\/strong\u003e\u003cbr\u003eHybrid compatibility is not separately confirmed. Verify the VIN, exact powertrain, engine code, original cover, and reference number.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it fit a 2017 Nissan Altima?\u003c\/strong\u003e\u003cbr\u003eYes, 2017 Altima is included in the detailed source fitment, subject to VIN, engine, original-cover, and reference-number verification.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eAre PCV parts or an oil cap included?\u003c\/strong\u003e\u003cbr\u003ePCV components and oil filler cap inclusion are not confirmed.\u003c\/p\u003e","brand":"Alchemyride","offers":[{"title":"Default Title","offer_id":47233148453037,"sku":"SA-132643KY0A","price":39.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/2515\/3453\/files\/61XqGPjbwAL.jpg?v=1786961540"},{"product_id":"rear-wheel-hub-bearing-for-07-18-nissan-altima-13-19-infiniti-qx60-jx35-etc","title":"Rear FWD ABS Wheel Hub 512388 for Infiniti JX35 QX60, Nissan Altima Maxima Murano Pathfinder","description":"\u003ch2\u003eRear 5-Lug ABS Wheel Hub and Bearing Assembly for FWD Models\u003c\/h2\u003e\u003cp\u003eRear wheel hub and bearing assembly for select Infiniti, Nissan, and Mitsubishi applications. This configuration is specified for \u003cstrong\u003efront-wheel-drive vehicles with ABS only\u003c\/strong\u003e.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eCritical fitment warning:\u003c\/strong\u003e \u003cstrong\u003eFWD and ABS models only.\u003c\/strong\u003e AWD and non-ABS configurations are not included in the available fitment information. The source does not specify driver or passenger side, engine, trim, body style, production-date breakpoints, ABS connector style, or package quantity. Confirm the VIN and compare the original hub’s drivetrain, ABS configuration, rear position, mounting pattern, flange dimensions, wheel-stud pattern, connector, wire routing, and reference number.\u003c\/p\u003e\u003ch3\u003eVehicle Compatibility\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003e2013 Infiniti JX35\u003c\/strong\u003e — FWD, ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2014–2019 Infiniti QX60\u003c\/strong\u003e — FWD, ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2007–2018 Nissan Altima\u003c\/strong\u003e — FWD, ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2009–2019 Nissan Maxima\u003c\/strong\u003e — FWD, ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2015–2016 Nissan Murano\u003c\/strong\u003e — FWD, ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2013–2019 Nissan Pathfinder\u003c\/strong\u003e — FWD, ABS\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003e2011 Mitsubishi RVR\u003c\/strong\u003e — FWD, ABS\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eFitment spans multiple platforms and generations. Verify the exact model, drivetrain, body configuration, production date, and original rear hub.\u003c\/p\u003e\u003ch3\u003eSpecifications\u003c\/h3\u003e\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePosition:\u003c\/strong\u003e Rear axle\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eDrivetrain:\u003c\/strong\u003e FWD only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eABS:\u003c\/strong\u003e ABS models only\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eWheel lugs:\u003c\/strong\u003e 5\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eFlange diameter:\u003c\/strong\u003e 5.83 in\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eBolt-circle diameter:\u003c\/strong\u003e 4.5 in\u003c\/li\u003e\n\u003c\/ul\u003e\u003cp\u003eThe source does not confirm flange offset or whether this hub fits the rear left, rear right, or both sides.\u003c\/p\u003e\u003ch3\u003eReference Numbers\u003c\/h3\u003e\u003cp\u003e512388, WE60522, BR930698.\u003c\/p\u003e\u003cp\u003eReference numbers and dimensions are provided for comparison. Match the original hub’s FWD and ABS configuration, connector and lead, mounting holes, flange, wheel studs, and vehicle VIN.\u003c\/p\u003e\u003ch3\u003ePackage Contents\u003c\/h3\u003e\u003cp\u003eThe source identifies a wheel hub assembly but does not explicitly state the package quantity or confirm axle nuts, mounting bolts, clips, seals, dust shields, or other installation hardware. Review the product images and confirm the contents before ordering.\u003c\/p\u003e\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\u003cp\u003eProfessional installation is strongly recommended. Wheel hubs are safety-critical components. Inspect the rear knuckle or spindle interface, ABS wiring and connector, brakes, wheel studs, tires, and related suspension parts. Clean and inspect all mating surfaces, route the ABS lead away from moving or hot components, and follow the vehicle manufacturer’s torque procedures. Do not use an impact tool for final fastener torque. After installation, verify smooth rotation, correct wheel seating, brake operation, and that no ABS warning remains. Perform a controlled low-speed safety check before normal road use.\u003c\/p\u003e\u003ch3\u003eFrequently Asked Questions\u003c\/h3\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit AWD vehicles?\u003c\/strong\u003e\u003cbr\u003eNo. The available source specifies FWD models only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes this fit non-ABS vehicles?\u003c\/strong\u003e\u003cbr\u003eNo. The source specifies ABS models only.\u003c\/p\u003e\u003cp\u003e\u003cstrong\u003eDoes it fit the rear left or rear right side?\u003c\/strong\u003e\u003cbr\u003eThe source does not confirm side compatibility. Compare the original hub, connector, dimensions, and reference numbers.\u003c\/p\u003e","brand":"Alchemyride","offers":[{"title":"Default Title","offer_id":47233186005165,"sku":"SA-512388","price":47.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/2515\/3453\/files\/71XclP6mJzL.jpg?v=1786962144"},{"product_id":"front-wheel-hub-bearing-assembly-for-2003-2007-nissan-murano-2004-2009-nissan-quest","title":"Front Wheel Hub Bearing Assembly for 2004-2009 Nissan Quest, 2003-2007 Murano","description":"\u003ch2\u003eFront Wheel Hub Bearing Assembly — 513310 (5-Lug, ABS, Front) — 2004–2009 Nissan Quest (V42) \/ 2003–2007 Nissan Murano (Z50)\u003c\/h2\u003e\n\u003cdiv style=\"background: #fff3cd; border: 1px solid #ffc107; padding: 12px 16px; border-radius: 4px; margin: 16px 0;\"\u003e\n\u003cstrong\u003e⚠️ SINGLE UNIT — Front Position (Left or Right):\u003c\/strong\u003e This listing is for \u003cstrong\u003eone (1) front wheel hub bearing assembly\u003c\/strong\u003e. For both front corners, order quantity 2. Front axle position only.\u003c\/div\u003e\n\u003ch2\u003eFull Vehicle Compatibility — Nissan FF-L Platform\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eMake\u003c\/th\u003e\n\u003cth\u003eModel\u003c\/th\u003e\n\u003cth\u003eGeneration\u003c\/th\u003e\n\u003cth\u003eYears\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003eQuest\u003c\/td\u003e\n\u003ctd\u003eV42 — Third Generation\u003c\/td\u003e\n\u003ctd\u003e2004–2009\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eNissan\u003c\/td\u003e\n\u003ctd\u003eMurano\u003c\/td\u003e\n\u003ctd\u003eZ50 — First Generation\u003c\/td\u003e\n\u003ctd\u003e2003–2007\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003cp\u003eThe third-generation Nissan Quest (V42) and first-generation Murano (Z50) share the same Nissan FF-L transverse platform front hub geometry — one part number covers the front hub position on both models. Confirm your make, model, and build year before ordering. Contact us with your VIN for fitment verification if unsure.\u003c\/p\u003e\n\u003cdiv style=\"background: #f8d7da; border: 1px solid #dc3545; padding: 12px 16px; border-radius: 4px; margin: 16px 0;\"\u003e\n\u003cstrong\u003e⚠️ GENERATION NOTE:\u003c\/strong\u003e\n\u003cul style=\"margin: 8px 0 0 0;\"\u003e\n\u003cli\u003e\n\u003cstrong\u003eNissan Quest:\u003c\/strong\u003e Fits 2004–2009 (V42, third generation) only. The second-generation Quest (1999–2002) and fourth-generation Quest (2011+) use different hub specifications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNissan Murano:\u003c\/strong\u003e Fits 2003–2007 (Z50, first generation) only. The second-generation Murano (Z51, 2009–2014) and third-generation Murano (Z52, 2015+) use different hub specifications.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/div\u003e\n\u003ch2\u003ePart Specifications\u003c\/h2\u003e\n\u003ctable\u003e\n\u003ctbody\u003e\n\u003ctr\u003e\n\u003cth\u003eSpecification\u003c\/th\u003e\n\u003cth\u003eDetails\u003c\/th\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePart Number\u003c\/td\u003e\n\u003ctd\u003e513310\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eSKU\u003c\/td\u003e\n\u003ctd\u003eSA-513310 (single unit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003ePosition\u003c\/td\u003e\n\u003ctd\u003eFront (single unit — left or right)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eLug Count\u003c\/td\u003e\n\u003ctd\u003e5 Lugs\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eABS\u003c\/td\u003e\n\u003ctd\u003eYes — ABS sensor ring integrated\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlange Diameter\u003c\/td\u003e\n\u003ctd\u003e5.35 in (135.9 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eFlange Offset\u003c\/td\u003e\n\u003ctd\u003e1.60 in (40.6 mm)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eBolt Circle Diameter\u003c\/td\u003e\n\u003ctd\u003e4.5 in (114.3 mm) — Nissan standard 5×114.3\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003ctr\u003e\n\u003ctd\u003eWeight\u003c\/td\u003e\n\u003ctd\u003e~3.50 kg (single unit)\u003c\/td\u003e\n\u003c\/tr\u003e\n\u003c\/tbody\u003e\n\u003c\/table\u003e\n\u003ch2\u003eKey Features\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eNissan FF-L Platform Front Hub:\u003c\/strong\u003e Correct front hub specification for the third-generation Nissan Quest (V42, 2004–2009) and first-generation Murano (Z50, 2003–2007). Confirm generation before ordering — other Quest and Murano generations use different hub specifications.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eNissan 5×114.3 Bolt Pattern:\u003c\/strong\u003e Fits the standard Nissan 5×114.3 bolt pattern used on the Quest V42 and Murano Z50 platform.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eOEM-Equivalent Quality:\u003c\/strong\u003e Meets or exceeds OEM performance standards. Tested for load rating, bearing clearance, and ABS sensor signal integrity before shipment.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eABS-Compatible:\u003c\/strong\u003e Integrated ABS tone ring — maintains factory ABS and vehicle dynamics control on all compatible Quest V42 and Murano Z50 vehicles.\u003c\/li\u003e\n\u003cli\u003e\n\u003cstrong\u003eComplete Assembly:\u003c\/strong\u003e Hub, bearing, and ABS ring pre-assembled — no press-fit or bearing packing required.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch2\u003eInstallation Notes\u003c\/h2\u003e\n\u003cul\u003e\n\u003cli\u003eProfessional installation recommended. Requires standard hub\/knuckle removal for Nissan FF-L platform front suspension.\u003c\/li\u003e\n\u003cli\u003eTorque all fasteners to OEM specification. Verify ABS sensor connector seating after installation.\u003c\/li\u003e\n\u003cli\u003eFor both front corners, order quantity 2.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cstrong\u003eNote:\u003c\/strong\u003e Single unit, front position. 513310, 5-lug, ABS, 5×114.3. Fits 2004–2009 Nissan Quest (V42, 3rd gen) and 2003–2007 Nissan Murano (Z50, 1st gen). Confirm generation before ordering — other Quest\/Murano generations do not fit.\u003c\/p\u003e\n\u003cdiv class=\"quick-specs\"\u003e\n\u003cstrong\u003eQuick Specs:\u003c\/strong\u003e Front Hub Assembly | 513310 | Nissan Quest V42 2004-2009 \u0026amp; Murano Z50 2003-2007 | 5-Lug | ABS | 5×114.3 | $38.99 each | AlchemyRide\u003c\/div\u003e","brand":"Alchemyride","offers":[{"title":"Default Title","offer_id":47233248034989,"sku":"SA-513310","price":38.99,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/2515\/3453\/files\/612cYJ0xa1L.jpg?v=1786962480"}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0721\/2515\/3453\/collections\/imgi_9_model-2027-murano-platinum-awd-two-tone-aurora-blue-metallic-super-black.png.ximg.l_3_m.smart.png?v=1791949119","url":"https:\/\/alchemyride.com\/collections\/nissan-murano.oembed","provider":"Alchemyride","version":"1.0","type":"link"}