2-Piece Front Left & Right Shock Absorber Strut Assembly Set for 2007-2014 Honda CR-V

Front Left and Right Shock Absorber Strut Assembly Set for Honda CR-V

Two-piece front suspension set for source-listed 2007–2014 Honda CR-V models. The package is identified as one front-left and one front-right shock absorber / strut assembly application.

Critical fitment warning: Fitment is model-, year-, suspension-, and configuration-specific. The source does not state engine, 2WD versus AWD, production-date breaks, trim, suspension package, spring rate, ride height, electronic damping, or chassis-market differences. It also does not clearly identify this as a complete loaded strut with coil springs and upper mounts. Confirm the VIN, drivetrain, production date, suspension option, original left/right references, mounting points, spring and mount requirements, brake-hose and ABS-wire brackets, and dimensions before ordering.

Vehicle Compatibility

• 2007–2014 Honda CR-V — front-left and front-right shock absorber / strut assembly application

Not confirmed: Universal interchange across 2WD and AWD, every engine or trim, special suspension packages, modified or lifted/lowered vehicles, or any vehicle whose original front suspension components and mounting points differ.

Position and Quantity

• Axle position: Front
• Side: Left and right
• Package quantity: 2 assemblies

Reference Numbers

1333365L, 1333365R, 11605, 11606, 55S11606, 55S11605, 272492, 282492, 282491, 272491

Reference numbers are retained as supplied. Do not rely on one matching number alone; verify side, drivetrain, suspension package, dimensions, mounting points, and all brackets against the original components.

Included Components

• 1 front-left shock absorber / strut assembly
• 1 front-right shock absorber / strut assembly

The source does not clearly confirm coil springs, upper strut mounts, mount bearings, spring seats, isolators, dust boots, bump stops, brake-hose brackets, ABS-wire brackets, nuts, bolts, washers, or other installation hardware. “Assembly” must not be treated as proof that every component of a complete loaded strut is included. Verify the product images and received package before disassembly.

Installation Notes

Front strut replacement is safety-critical suspension work and should be performed by a qualified technician. If coil springs must be transferred, use an approved spring compressor and the vehicle-specific Honda procedure. Stored spring energy can cause severe injury.

Before installation, compare left and right parts with the originals for overall length, lower mounting ears, upper stem or mount, spring seat orientation, brake-hose bracket, ABS-wire routing, and clearance. Inspect control arms, ball joints, tie-rod ends, stabilizer links and bushings, wheel bearings, springs, upper mounts, bearings, boots, bump stops, fasteners, tires, and the opposite suspension components.

Use new one-time-use or damaged hardware where required and follow Honda torque specifications with the suspension positioned as directed. Do not use an impact tool on the damper shaft unless the service procedure permits it. After installation, verify hose and wire routing, steering movement, wheel and tire clearance, ride height, and fastener security. A four-wheel alignment should be checked and corrected before normal road use, followed by a controlled low-speed road test.

Frequently Asked Questions

Does this package include both front sides?
Yes. The source identifies a two-piece front-left and front-right set.

Are coil springs and upper mounts included?
The source does not clearly confirm them. Review the product images and received package before installation.

Does this fit both 2WD and AWD CR-V models?
Drivetrain coverage is not stated. Verify the VIN and original suspension components.

Is an alignment required?
Front strut work can change alignment. Alignment should be checked and corrected after installation.