Rear Left & Right Complete Strut and Coil Spring Assembly Pair for 1992-1996 Toyota Camry 2.2L L4

Rear Left and Right Complete Strut and Coil-Spring Assembly Pair

Two-piece rear suspension set containing left- and right-side complete strut and coil-spring assemblies for the exact 2.2L four-cylinder Toyota Camry Sedan and Coupe applications listed below.

Critical fitment warning: Fitment is restricted to the 2.2L L4 and the body-style-specific year ranges below. Sedan coverage begins in 1992, while Coupe coverage begins in 1994. The source does not provide transmission, trim, production date, ABS, suspension package, or ride-height details. Confirm the VIN, 2.2L engine, Sedan or Coupe body style, exact model year, original left and right strut references, lower mounting geometry, brake-hose and ABS-wire brackets, upper-mount pattern, spring configuration, and vehicle ride height before ordering.

Vehicle Compatibility

• 1992–1996 Toyota Camry Sedan — 2.2L L4 only
• 1994–1996 Toyota Camry Coupe — 2.2L L4 only

Not confirmed: V6 engines, Wagon body style, 1992–1993 Coupe, modified suspension, non-standard ride height, or any configuration whose original left/right mounting geometry and spring specification do not match.

Position and Quantity

• Axle position: Rear
• Sides: Left/driver and right/passenger
• Quantity: 2 complete assemblies

Confirmed Assembly Contents

• 1 rear-left complete strut and coil-spring assembly
• 1 rear-right complete strut and coil-spring assembly

The assemblies are identified as complete strut and coil-spring units, but the source does not separately itemize every installed component. Upper mounts, mount bearings or bushings, spring seats, isolators, dust boots, bump stops, nuts, and mounting hardware should be verified from the product images and received package before installation.

Reference Numbers

171958, 171957, 181958, 181957, 1332338R, 1332338L, 818693, 818694

Reference numbers are provided for comparison. The source includes left- and right-designated entries but does not map every number to a side. Match both original struts, body style, mounting points, brackets, spring shape, and upper-mount orientation before installation.

Installation Notes

Suspension service affects steering, braking, alignment, and vehicle stability and should be performed by a qualified technician. Replace rear struts in axle pairs as supplied. Compare each assembly with the original side before installation, including overall length, lower mounting, upper-stud pattern, spring seating, brake-hose bracket, ABS-wire routing, and left/right orientation.

Inspect the rear suspension arms, bushings, sway-bar links and bushings, wheel bearings, tires, brake hoses, and fasteners. Follow Toyota procedures for lifting, installation, tightening at the specified suspension position, and torque values. Do not loosen or disassemble a compressed coil spring unless using approved spring-compression equipment and procedures. After installation, check and adjust wheel alignment as required, then verify ride height, brake-hose and ABS-wire clearance, handling, and the absence of abnormal noise before road use.

Frequently Asked Questions

Are both rear sides included?
Yes. This is a two-piece rear-left and rear-right complete strut and coil-spring assembly set.

Does it fit a V6 Camry?
No V6 application is confirmed. The source limits fitment to the 2.2L four-cylinder engine.

Does it fit a 1992 or 1993 Camry Coupe?
No. Coupe coverage begins in 1994. The 1992–1993 entries apply to the Sedan only.

Are upper mounts and all hardware included?
The assemblies are described as complete, but each subcomponent is not separately itemized. Verify the product images and received package.