Front 5-Lug Wheel Hub Bearing for Toyota Camry, Avalon & Lexus ES250

Front 5-Lug Wheel Hub and Bearing Assembly

Front wheel hub and bearing assembly for the exact Toyota Camry, Toyota Avalon, and Lexus ES250 applications listed below. The source identifies front-left or front-right use, a five-lug configuration, a four-hole flange, direct CV-axle insertion, and a pre-greased assembly.

Critical fitment warning: Hub assemblies can vary by engine, gasoline or hybrid powertrain, drivetrain, model year, production date, wheel-speed sensing design, CV axle, brake package, steering knuckle, flange dimensions, and mounting pattern. Confirm the VIN, exact engine and powertrain, drivetrain, original-hub dimensions, four-hole mounting flange, CV-axle interface, sensing arrangement, and every reference number before ordering.

Lexus Compatibility

• 2021 Lexus ES250 — source-listed Base, F Sport, and Ultra Luxury trims
• 2022–2023 Lexus ES250 — source-listed 2.5L L4

Toyota Compatibility

• 2021 Toyota Avalon 2.5L L4, gasoline model only
• 2018–2022 Toyota Camry 2.5L L4, gasoline models only

Explicit exclusions: Toyota Avalon Hybrid and Toyota Camry Hybrid.

Not confirmed: Other engine sizes, hybrid applications, specific FWD or AWD interchange, unlisted model years, other Lexus ES models, or vehicles whose CV axle, wheel-speed sensing system, flange, mounting pattern, steering knuckle, or brake package differs. The source does not state drivetrain coverage; verify the VIN and original hub.

Product Specifications

• Position: Front left or front right
• Wheel studs: 5-lug configuration
• Flange: 4-hole flange
• Axle interface: CV axle inserts directly
• Lubrication: Pre-greased

The source does not provide flange diameter, hub pilot diameter, bolt-circle diameter, flange offset, spline count, stud thread size, mounting-bolt spacing, wheel-speed sensor inclusion, encoder-ring details, connector information, or torque specifications. Compare all mechanical and sensing features with the removed hub before installation.

Package Contents

• Front wheel hub and bearing assembly; package quantity not specified

The source does not confirm a wheel-speed sensor, mounting bolts, axle nut, brake hardware, dust shield, snap ring, wiring, wiring clips, or installation tools. “Front left and right side” indicates the listed application position and does not prove that two hub assemblies are included.

Reference Numbers

513439, WE61872, 4355033010, 4355006010

Reference numbers are supplied for comparison only. A matching number does not override engine, hybrid, drivetrain, CV-axle, sensing, dimensional, mounting-pattern, brake-package, or production-date differences.

Installation Notes

Professional installation is recommended. Confirm the exact engine, gasoline-only configuration where specified, drivetrain, and original hub before disassembly. Safely support the vehicle and follow the model-, year-, drivetrain-, axle-, and brake-specific service procedure.

Compare the replacement hub with the original for stud pattern, four-hole flange, pilot, mounting points, flange offset, CV-axle interface, spline engagement, brake-rotor fit, and wheel-speed sensing features. Do not install a hub whose axle interface or sensing design differs.

Clean the steering-knuckle mounting surface and remove corrosion or debris without damaging the mating face. Inspect the CV axle and splines, steering knuckle, brake components, dust shield, sensor, wiring, and fasteners. Replace damaged or manufacturer-designated single-use hardware as required.

Use the vehicle manufacturer's sequence and torque specifications for hub mounting bolts, axle nut, brake components, suspension fasteners disturbed during service, and wheel fasteners. Do not use an impact tool for final axle-nut tightening unless the service procedure specifically permits it. Incorrect torque can damage the bearing or create wheel play.

Route any wheel-speed sensor wiring exactly as required and verify all connectors are secure. After installation, check wheel rotation, brake operation, ABS and stability-control warning lights, wheel play, and abnormal noise. Complete an alignment check if required by the service procedure or related suspension work.

Frequently Asked Questions

Does this fit a Toyota Camry or Avalon Hybrid?
No. The source explicitly excludes Hybrid applications for the listed Toyota models.

Does this fit both front sides?
The source specifies front-left or front-right use, subject to matching the original hub and sensing arrangement.

Are two hubs included?
Package quantity is not stated. Do not assume a pair is included.

Is the wheel-speed or ABS sensor included?
The source does not state that a sensor is included. Compare the original sensing arrangement and product images before ordering.

Does it fit both FWD and AWD?
Drivetrain coverage is not specified by the source. Confirm the VIN, drivetrain, CV axle, original hub, and reference number.

Is the assembly pre-greased?
Yes. The source identifies the hub assembly as pre-greased.