Front 4WD Wheel Hub Bearing Assembly for 2006-2008 Dodge Ram 1500, 2500 & 3500, 8-Lug ABS

Front 4WD Wheel Hub and Bearing Assembly with ABS

Front wheel hub and bearing assembly for the listed 2006–2008 Dodge Ram 1500, Ram 2500, and Ram 3500 4WD applications. The source specifies an 8-lug configuration and ABS compatibility.

Critical fitment warning: This assembly is limited to 4WD models with an 8-lug wheel pattern. It is not confirmed for 2WD trucks or 5-lug configurations. The source does not specify front-left versus front-right side, package quantity, engine, cab style, wheelbase, GVWR, single- or dual-rear-wheel configuration, axle model, production date, spline count, ABS connector shape, sensor wire length, or mounting-bolt details. Confirm the VIN, 4WD drivetrain, 8-lug pattern, axle and GVWR configuration, original reference, side, flange dimensions, splines, mounting points, ABS connector, and sensor configuration before ordering.

Vehicle Compatibility

• 2006–2008 Dodge Ram 1500 — 4WD, 8-lug, front axle
• 2006–2008 Dodge Ram 2500 — 4WD, 8-lug, front axle
• 2006–2008 Dodge Ram 3500 — 4WD, 8-lug, front axle

Not confirmed: 2WD trucks, 5-lug configurations, or any model, year, drivetrain, axle, GVWR, or wheel configuration not matching the details above.

Confirmed Specifications

• Axle position: Front
• Drivetrain: 4WD only
• Wheel studs: 8-lug configuration
• ABS: ABS-compatible assembly
• Flange diameter: 8.07 in
• Flange offset: 2.16 in
• Bolt-circle diameter: 6.5 in

Left/right interchangeability, package quantity, spline count, wheel-stud thread, ABS connector, sensor wire length, mounting-bolt dimensions, and axle-nut specifications are not provided.

Reference Numbers

515101, WE60879, HA590166, BR930507, 5179955AA

Reference numbers are provided for comparison. Match them together with the VIN, drivetrain, axle and GVWR configuration, side, lug pattern, flange dimensions, splines, mounting points, ABS connector, and sensor configuration.

Package Contents

The source identifies a front wheel hub and bearing assembly but does not confirm package quantity or left/right interchangeability. It also does not separately confirm the ABS sensor, harness, mounting bolts, axle nut, seals, or other hardware. Check the product images and package details before ordering; do not assume a left-and-right pair.

Installation Notes

Wheel-bearing service affects steering, braking, ABS operation, and wheel retention. Professional installation is recommended. Inspect the steering knuckle, drive axle, axle splines, ABS wiring, brake components, and mounting surfaces before installation. Compare the flange, offset, bolt circle, connector, wire routing, and mounting points with the original hub. Follow vehicle-specific torque procedures for the axle nut, hub fasteners, brake components, and wheel nuts. Do not use an impact tool for final axle-nut torque unless the service procedure permits it. After installation, verify wheel rotation, end play, ABS operation, brake operation, wheel-nut torque, and the absence of warning lights or abnormal noise.

Frequently Asked Questions

Does this fit 2WD models?
No 2WD fitment is confirmed. The source specifies 4WD only.

Is this a 5-lug or 8-lug hub?
This is specified as an 8-lug hub with a 6.5-inch bolt-circle diameter.

Does it fit the front left and front right?
The source confirms only the front axle. Left/right interchangeability is not stated, so compare the original assembly and ABS connector before ordering.

Is this a pair?
Package quantity is not confirmed. Do not assume two assemblies are included.