DKS17D A/C Compressor with Clutch for 2008-2013 Rogue & 2014-2015 Rogue Select, NA-Built

DKS17D A/C Compressor with Clutch for Nissan Rogue 2.5L

Replacement DKS17D air-conditioning compressor with clutch for listed North America-built Nissan Rogue and Rogue Select 2.5L applications.

Critical fitment warning: This compressor is limited to North America-built vehicles with the 2.5L L4 engine. Verify the VIN and vehicle production label before ordering; vehicles built for or produced in other regions are not confirmed. Also match the original compressor label or reference number, DKS17D body, mounting ears, refrigerant ports and manifold, electrical connector, clutch, pulley alignment, and 6-groove belt configuration.

Vehicle Compatibility

• 2008–2013 Nissan Rogue — 2.5L L4, North America-built only
• 2014–2015 Nissan Rogue Select — 2.5L L4, North America-built only

Do not apply this listing to the regular 2014–2015 Rogue unless the exact model, build origin, compressor reference, and physical configuration match the stated Rogue Select application.

Confirmed Specifications

• Compressor type: DKS17D
• Clutch: Included
• Pulley: 6 grooves
• Refrigerant: R-134a
• Oil type: PAG 46
• Oil prefill: 170 mL

Oil-volume warning: The stated 170 mL is the compressor’s source-listed prefill, not confirmation of the vehicle’s total system oil requirement. A/C oil must be balanced according to Nissan service information and the amount retained in or removed from other components. Too much or too little oil can damage the system.

Reference Numbers

92600-JM01B, 92600-JM01C, 92600-JM01E, 92610-JM01A, 92610-JM01C, 92610-JM01E, CO-11200C, 98490, 97490

Reference numbers are provided for comparison. Match them together with the VIN, build origin, engine, compressor type, mounting pattern, ports, electrical connector, clutch, and pulley configuration.

Package Contents

One DKS17D A/C compressor with clutch and 6-groove pulley. Manifold, hoses, O-rings, seals, mounting bolts, belt, tensioner, receiver-drier or accumulator, expansion valve, refrigerant, flushing materials, and additional oil are not confirmed unless shown in the product images.

Installation Notes

Automotive A/C service requires certified refrigerant-recovery equipment and should be completed by a qualified technician. Diagnose the cause of the original compressor failure before installation. If metal debris, black oil, or internal contamination is present, follow Nissan procedures for flushing or replacing affected components; condensers with non-flushable passages may require replacement. Replace the receiver-drier or accumulator and expansion valve where required, renew all disturbed O-rings with compatible seals, and verify the oil balance. Rotate the compressor shaft by hand as directed before startup. Evacuate the system, confirm it holds vacuum, and charge only the specified weight of R-134a shown on the vehicle label. After installation, verify clutch operation, system pressures, vent temperature, belt alignment, and leak-free connections.

Frequently Asked Questions

Does this fit every 2008–2013 Rogue?
No. The source limits fitment to North America-built vehicles with the 2.5L L4 engine.

Does this fit a regular 2014–2015 Rogue?
The source specifies Rogue Select for those years. Regular Rogue fitment is not confirmed.

Is the clutch included?
Yes. The source specifies a compressor with clutch.

Is 170 mL the total system oil capacity?
Not necessarily. It is the source-listed compressor prefill. Set the final system oil balance using Nissan service information and the condition of the remaining components.