Air Suspension Compressor for Cadillac Escalade, Chevy Tahoe Suburban & GMC Yukon

Air Ride Suspension Compressor Pump for GM SUVs

Replacement air suspension compressor pump for the specific Cadillac Escalade, Chevrolet Avalanche, Suburban and Tahoe, and GMC Yukon applications listed below.

Critical fitment warning: This compressor is intended only for vehicles originally equipped with a compatible air-leveling or air-suspension system. The source does not provide RPO codes, drivetrain, wheelbase, trim, production-date, connector, air-line fitting, mounting-bracket, or suspension-package restrictions. Confirm the VIN, factory option label/RPO codes, original compressor number, electrical connector, air-line fitting, mounting points, and suspension configuration before ordering. Replacing the compressor without repairing leaking air springs, lines, fittings, or valves can cause repeated compressor failure.

Vehicle Compatibility

Cadillac

• 2002–2016 Escalade
• 2003–2016 Escalade ESV
• 2002–2013 Escalade EXT

Chevrolet

• 2002–2006 Avalanche 1500
• 2007–2013 Avalanche
• 2001–2014 Suburban 1500
• 2015–2016 Suburban
• 2001–2016 Tahoe

GMC

• 2001–2016 Yukon
• 2001–2014 Yukon XL 1500
• 2015–2016 Yukon XL

Vehicle fitment requires the correct factory air-leveling or air-suspension option. Conventional-suspension vehicles without the compatible system are not confirmed.

Reference Numbers

5254590, 19299545, 20930288, 22941806, 949-000, 949000, 949-001, 949001, ASK-GM001-CP

Use reference numbers together with the VIN, RPO codes, original compressor label, connector, air fitting, and mounting configuration.

Package Contents

One air suspension compressor pump. The source does not separately confirm a mounting bracket, dryer, relay, fuse, intake hose, air lines, fittings, wiring harness, vibration isolators, valve block, ride-height sensor, or mounting hardware. Review the product images and compare all included parts with the original unit.

Diagnostic and Installation Notes

Air-suspension work affects vehicle ride height and handling; professional diagnosis and installation are recommended. Before replacing the compressor, scan the suspension-control system for fault codes and inspect the air springs, shocks, lines, fittings, dryer, relay, fuse, height sensors, wiring, and compressor intake. Repair every leak or restriction first. Support the vehicle safely before disconnecting pressurized components. After installation, follow the applicable GM procedure for electrical checks, system filling, ride-height calibration, and fault-code clearing. Confirm that the compressor cycles normally, the vehicle reaches the specified ride height, and the system holds pressure without excessive cycling.

Frequently Asked Questions

Does this fit every vehicle in the listed years?
No. The vehicle must have the compatible factory air-leveling or air-suspension system. Verify VIN, RPO codes, and the original compressor.

Why did the original compressor fail?
Common causes include leaking air springs or shocks, damaged lines or fittings, a restricted dryer or intake, faulty relay or wiring, and ride-height sensor problems. Diagnose the complete system before replacement.

Are the bracket, relay, and dryer included?
Not confirmed. Review the product images and compare the package contents with the original assembly.

Does this replace conventional coil or steel suspension?
No such conversion is confirmed. This listing is for a compatible factory air-leveling or air-suspension compressor application.