Air Suspension Compressor for Mercedes-Benz CLS500 CLS550 E320 E350 E500 E550 S430 S500 S600 & AMG

Air Suspension Compressor Pump for Mercedes-Benz CLS, E-Class, and S-Class

Replacement air suspension compressor pump for the specific Mercedes-Benz CLS, E-Class, S-Class, and AMG applications listed below.

Critical fitment warning: This compressor is intended only for vehicles equipped with a compatible factory air-suspension or self-leveling system. The source does not provide chassis codes, body style, drivetrain, production-date, suspension-option, connector, air-line fitting, mounting-bracket, or control-system restrictions. Confirm the VIN, factory equipment data, original compressor number, electrical connector, air-line fitting, mounting points, and complete suspension configuration before ordering. Replacing the compressor without repairing leaking air springs, struts, lines, fittings, or valves can cause repeated compressor failure.

Vehicle Compatibility

Mercedes-Benz CLS-Class

• 2006 CLS500
• 2006 CLS55 AMG
• 2007–2009 CLS550
• 2007–2009 CLS63 AMG

Mercedes-Benz E-Class

• 2002–2009 E320
• 2006–2009 E350
• 2003–2009 E500
• 2002–2006 E55 AMG
• 2007–2009 E550
• 2007–2009 E63 AMG

Mercedes-Benz S-Class

• 2000–2006 S430
• 2000–2006 S500
• 2001–2006 S600

Vehicle model and year alone are not sufficient. Confirm that the original vehicle has the compatible factory air-suspension system and match the compressor connections and mounting configuration.

Reference Numbers

2203200104, 2203200304, 2113200104, 2113200304, 2193200004

Use reference numbers together with the VIN, original compressor label, electrical connector, air fitting, and mounting points. Chassis-code coverage is not provided by the source.

Package Contents

One air suspension compressor pump. The source does not separately confirm a mounting bracket, dryer, relay, fuse, intake hose, air lines, fittings, wiring harness, vibration isolators, valve block, ride-height sensor, or mounting hardware. Review the product images and compare all included parts with the original unit.

Diagnostic and Installation Notes

Air-suspension work affects vehicle ride height and handling; professional diagnosis and installation are recommended. Before replacing the compressor, scan the suspension-control system for fault codes and inspect the air springs or struts, lines, fittings, dryer, relay, fuse, height sensors, wiring, valve block, and compressor intake. Repair every leak or restriction first. Support the vehicle safely before disconnecting pressurized components. After installation, follow the applicable Mercedes-Benz procedure for electrical checks, system filling, ride-height calibration, and fault-code clearing. Confirm that the compressor cycles normally, the vehicle reaches the specified ride height, and the system holds pressure without excessive cycling.

Frequently Asked Questions

Does this fit every 2000–2009 Mercedes-Benz?
No. Fitment is limited to the listed CLS, E-Class, S-Class, and AMG models with a compatible factory air-suspension system.

Are chassis codes confirmed?
No. The source does not provide chassis codes. Verify the VIN and original compressor number.

Why did the original compressor fail?
Common causes include leaking air springs or struts, damaged lines or fittings, a restricted dryer or intake, faulty relay or wiring, valve-block leaks, and ride-height sensor problems.

Are the bracket, relay, and dryer included?
Not confirmed. Review the product images and compare the package contents with the original assembly.