12V 105A Alternator for Acura CSX TSX & Honda Accord Civic CR-V Element

12V 105A Alternator for Select Acura and Honda Models

Replacement 12-volt, 105-amp alternator with a 7-groove clutch pulley for the specific Acura and Honda applications listed below.

Critical fitment warning: Accord coverage is limited to the 2.4L L4, and Civic coverage is limited to the 2.0L L4. The source does not provide engine, trim, transmission, production-date, electrical-option, or connector restrictions for CSX, TSX, CR-V, and Element. Confirm the VIN, engine, original alternator label, rated output, mounting ears, electrical plug, battery-terminal position, pulley type, pulley diameter, and groove count before ordering.

Vehicle Compatibility

Acura

• 2006–2008 CSX — engine and configuration restrictions not provided by source
• 2004–2008 TSX — engine and configuration restrictions not provided by source

Honda

• 2003–2007 Accord — 2.4L L4 only
• 2006–2011 Civic — 2.0L L4 only
• 2007–2011 CR-V — engine and configuration restrictions not provided by source
• 2003–2011 Element — engine and configuration restrictions not provided by source

Other Accord and Civic engines are not confirmed. Match the exact original alternator and connector configuration rather than relying on model year alone.

Specifications

• Voltage: 12V
• Rated output: 105A
• Rotation: Clockwise (CW)
• Pulley: 7-groove clutch pulley
• Configuration: IR/IF per source

Package Contents

One alternator with pulley. Drive belt, tensioner, mounting bolts, wiring, battery-terminal hardware, and installation tools are not confirmed unless shown in the product images.

Diagnostic and Installation Notes

Charging-system work should be completed by a qualified technician. Test the battery, cables, grounds, belt, tensioner, and charging circuit before replacing the alternator. Disconnect the battery according to the vehicle service procedure before removal. Compare the mounting points, connector, output terminal, pulley alignment, and clutch-pulley operation with the original unit. Follow Acura or Honda torque specifications, confirm belt routing and tension, and keep tools clear of the battery terminal. After installation, verify charging voltage and current under load, check for warning lights or abnormal noise, and ensure the battery is fully charged; an undercharged or failing battery can overload a replacement alternator.

Frequently Asked Questions

Does this fit a V6 Accord?
No V6 fitment is confirmed. The listed Accord application is limited to the 2.4L L4.

Does this fit a standard Civic engine?
The source specifies the 2.0L L4 only. Other Civic engines, including hybrid applications, are not confirmed.

What pulley does it use?
The source specifies a 7-groove clutch pulley. Verify pulley diameter and design against the original alternator.

Is the drive belt included?
Not confirmed. The listing identifies one alternator with pulley; review the product images for exact contents.