Universal Carbon Fiber Front Bumper Fins / Canards for BMW 2, 3, 4 & 5 Series and M2, M3, M4, M5

Universal Carbon Fiber Front Bumper Fins

Universal carbon fiber fins, also called canards, that stick onto the corners of the front bumper to add a sharper, track-inspired edge to the front of the car. They are moulded from quality 3x3 weave carbon fiber and finished in a double-layer UV-protected clear coat for a smooth, high-gloss surface that resists fading. Being universal, they mount with the adhesive tape supplied rather than to any factory mounting points.

Fitment

The supplier lists the following BMW models:

• BMW 2 Series F22/F23 2014-2019 (218i, 220i, 228i, 230i, M235i, M240i), Coupe and Convertible
• BMW M2 F87 2014-2019, Coupe
• BMW 3 Series E90/E92/E93 2005-2013 (316i, 318i, 320i, 325i, 328i, 330i, 335i, M3), Sedan, Coupe and Convertible
• BMW 3 Series F30 2012-2018 (320i, 325i, 328i, 335i), Sedan
• BMW M3 F80 2014-2019, Sedan
• BMW 3 Series G20 2019-2021 (318i, 320i, 330i, M340i), Sedan
• BMW 4 Series F32/F33/F36 2014-2019 (418i, 420i, 428i, 435i, 440i), Coupe, Convertible and Gran Coupe
• BMW M4 F82/F83 2015-2019, Coupe and Convertible
• BMW 5 Series E60 2004-2010 (520i-550i, M5), Sedan
• BMW 5 Series F10 2011-2018 (520i-550i, M5), Sedan
• Position: Front bumper corners

These fins are a universal design. They can also be fitted to other cars, including Audi and Mercedes-Benz models, where the bumper corner shape suits, but only the BMW models above are specifically listed. Front bumper shapes vary by trim and package, so send photos of your front bumper to confirm before ordering.

Specifications

• Material: Quality 3x3 weave carbon fiber
• Finish: Double-layer UV-protected clear coat, smooth high-gloss surface
• Type: Universal, add-on
• Mounting: Adhesive tape included, no modification required
• Packaging: Multi-layer protective export carton, shockproof

Installation

1. Hold each fin against the bumper corner to find the best position and angle, and mark it with masking tape.
2. Clean and degrease the area, then let it dry fully. Warm conditions help the tape bond.
3. Peel the backing and press the fin firmly into place.
4. Keep the car dry for 24 hours before washing.

FAQ

Will they fit my car? They are universal and suit the listed BMW models. For other cars, send photos of your front bumper first.

Is drilling required? No. They mount on the supplied adhesive tape.

Can they be removed later? Yes, nothing on the bumper is cut or drilled.

Do they fit Audi or Mercedes-Benz? They can, depending on the bumper shape, but those cars are not specifically listed, so please confirm with photos.