BMW Z4 G29 M Sport / M40i Carbon Front Lip & Splitter Options 2019–2024
Available in stock (20)
Carbon Fiber Front Lip and Splitter Options for BMW Z4 G29
Add a gloss woven-carbon accent to the lower front bumper of your Z4. Choose from the existing Front Lip, Front Lip With Splitters or Splitters options. Check the selected option's contents and attachment layout before ordering; these option names do not establish a physical piece count.
Source-Listed Fitment
- BMW Z4 G29 sDrive20i M Sport and sDrive30i M Sport.
- BMW Z4 G29 M40i.
- Convertible, two-door, as described in the introduction.
- Detailed listed years: 2019, 2020, 2021, 2022, 2023 and 2024.
- Explicit exclusion: BMW Z4 G29 Base models.
The detailed fitment table specifies 2019–2024, while the introduction uses 2019UP. This description retains the bounded detailed range, not unlimited later-year coverage. The combined table does not verify every engine/version for every year or market.
Confirm VIN, production date, market specification and the actual M Sport/M40i bumper contour, underside interfaces and original lower trim before ordering. No separate facelift, equipment or production-change compatibility map is supplied, so compare the actual bumper across the listed years rather than assuming unchanged mounting. Other chassis, Base bumpers, later years and aftermarket bumper conversions are not established applications.
Style Options and Contents
- Front Lip: option named for the front lip; splitters are not established as included in this selection.
- Front Lip With Splitters: option named for the front lip with splitters.
- Splitters: option named for splitters; a front lip is not established as included in this selection.
Exact physical piece count, splitter side allocation, section layout and a complete packing list are not supplied. The plural word splitters does not independently prove a left/right pair. Confirm the selected option's actual contents and whether separately required components are needed for mounting.
Material and Finish
- Shared source specification: 3x3 weave carbon fiber.
- Hand-laid construction described using pre-impregnated carbon cloth and epoxy resin.
- Gloss finish with a double-layer UV-protected clear coating.
- Source-described development using 3D laser scanning, CAD, CNC moulding and vehicle trial installation.
No separate construction sheet is supplied for each Style option. Confirm the shared specifications against the selected components. Pre-impregnated cloth alone does not establish dry-carbon manufacture. No dry-carbon or autoclave specification is provided.
Backing composition, laminate schedule, thickness, dimensions and measured net weight are not documented. UV protection does not guarantee permanent fade resistance, and development methods do not guarantee identical fit on every vehicle.
No test results substantiate reduced front lift, increased downforce, improved traction or control, reduced drag, fuel savings or quantified weight reduction. These performance claims are not made.
Installation Materials and Product Scope
The shared feature list states that self-tapping screws and tape are included. It does not provide an option-specific allocation, screw sizes or quantities, approved mounting positions, torque values, tape grade, amount or pre-application status. Confirm the fitting materials supplied with the selected Style. Brackets, drilling templates and additional adhesive products are not itemized.
These are front bumper styling components, not a complete bumper, structural impact system, step, lifting support or towing attachment. The source does not establish which original lower trims must be removed or transferred. Verify the complete attachment procedure before disassembly.
Professional Installation
- Confirm the selected Style, complete contents and actual bumper interface before drilling, removing original trim or exposing adhesive.
- Trial-fit all supplied sections without forcing the composite. Check alignment, mounting contact and ground clearance.
- Keep air openings, drainage, original fasteners, tow-point access and any fitted sensors or other equipment unobstructed. Contour matching alone does not establish equipment compatibility.
- Prepare compatible clean, fully dry bonding surfaces. Previous repairs or coatings may require specialist preparation.
- Verify approved screw positions, safe drilling depth and a suitable mounting substrate. Avoid concealed wiring, hoses and other equipment. Included self-tapping screws do not establish drill-free fitting.
- Use the verified combination of mechanical fastening and tape for each selected component. Do not substitute tape alone for required fasteners or bridge contour gaps with adhesive. Follow the actual tape manufacturer's temperature, pressure and full curing requirements.
- Check secure retention and relevant vehicle functions before driving. Inspect periodically and after washing, impact or ground contact.
Professional installation is recommended. No fixed fitting time, universal no-modification claim or perfect-fit guarantee is made. Do not drive with loose sections or equipment interference. Use caution around ramps, curbs and uneven surfaces, as the added profile may reduce usable clearance.
Care
Clean with a soft cloth and non-abrasive products compatible with the gloss coating. Avoid aggressive solvents and close-range high-pressure water at joints and bonded edges. Observe adhesive curing requirements before washing. Inspect the coating, laminate and retaining points regularly.
Frequently Asked Questions
Which years are listed?
The detailed table lists 2019–2024. Verify the actual bumper and production details, as no individual revision map is supplied.
Does it fit Base models?
No. Base models are explicitly excluded.
Does every option include the lip and splitters?
No. Select the named Style and confirm its packing list. Only Front Lip With Splitters names both component categories.
How many pieces are supplied?
Exact piece count and splitter side allocation are not stated.
Is it dry carbon?
No dry-carbon manufacturing specification is supplied. The prepreg-cloth statement alone does not establish it.
Are screws and tape included?
They are listed in the shared features, but quantities and option-specific allocation require confirmation.
Is installation drill-free?
That is not established. Confirm approved mounting points and the actual procedure before fitting.
Couldn't load pickup availability
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Quick order list
Clients Love Us
Stephanie L.
Ordered the BMW front bumper fog light grille and the fitment was absolutely perfect. Gloss black finish looks factory-fresh and the quality is outstanding. Installation took about 30 minutes — no drilling required. Highly recommend AlchemyRide!
Marcus R.
Fast shipping, great packaging, and the part arrived in perfect condition. The grille fits my F23 like a glove — exactly as described. Customer service was also super responsive when I had a fitment question. Will definitely order again.
David K.
I've bought aftermarket parts from many stores but AlchemyRide stands out for quality and value. The part was well-made, fit perfectly, and the price was very competitive. My BMW looks aggressive and clean — exactly what I wanted.
Jenny T.
Excellent product and super easy to install. The gloss black finish matches my M Sport bumpers perfectly. Shipping was faster than expected and the part was well-packaged. Very happy with my purchase — my car looks completely transformed!