Vinyl Car Door Sill and Rear Bumper Protectors, Carbon-Fiber Texture

Carbon-Fiber Texture Car Door Sill Protectors

Help cover and protect high-contact vehicle edges with adhesive vinyl film designed for car door sills and suitable rear bumper loading areas. The textured surface adds a sporty visual detail while helping reduce marks from shoes, luggage, tools, and everyday dirt.

Product Highlights

• Vinyl film construction with a carbon-fiber texture appearance
• Water-resistant surface that is easy to wipe clean
• Designed to help cover existing scuffs and reduce new surface scratches
• High-temperature-resistant material according to the supplied product information
• Adhesive backing for direct application to a clean, suitable surface
• Available in inside-sill, outer-sill, or combined inside-and-outer sets

The “carbon-fiber” wording describes the surface texture and appearance. The supplied material information identifies the product as vinyl film, not confirmed real carbon fiber.

Choose Your Set

• Inside Door Sill Protectors - 4PCS: For the inner door sill area
• Outer Door Sill Protectors - 4PCS: For the outer door sill area
• Inside and Outer Door Sill Protectors - 8PCS: Combined inner and outer sill set

Recommended Applications

• Inner door sill entry areas
• Outer door sill edges exposed to shoe contact
• Suitable rear bumper loading edges where the surface shape and clearance allow

This is a general automotive protection accessory. No specific vehicle model, year, trim, or dimensions are confirmed in the supplied information. Check the length, width, contours, door clearance, and intended coverage on your vehicle before ordering.

Installation Instructions

1. Clean the target surface thoroughly and remove grease, dust, wax residue, and moisture.
2. Test-position the protector before removing the backing to confirm the placement and edge clearance.
3. Peel away the protective film from the adhesive gradually.
4. Apply the protector from one end while aligning it with the sill or bumper edge.
5. Press firmly across the surface and use a suitable squeegee or soft pressing tool to smooth it into place.

Do not apply over loose paint, rust, damaged trim, sharp projections, heavy texture, or wet surfaces. Avoid door seals, latches, hinges, drainage paths, sensors, lights, and any area where the film could interfere with normal vehicle operation. Adhesion depends on surface preparation, temperature, curvature, and application quality.

Care and Use Notes

• Wipe the surface with a soft cloth and mild cleaner.
• Do not use abrasive tools or harsh chemicals that could damage the film or adhesive.
• Inspect the edges periodically for lifting, dirt buildup, or damage.
• Replace the protector if it lifts, cracks, or no longer covers the intended surface.

Frequently Asked Questions

What material is used?
The supplied information identifies vinyl film with a carbon-fiber texture design.

Is it real carbon fiber?
Real carbon-fiber construction is not confirmed. The product is described as vinyl film with a carbon-fiber-style texture.

Which set should I choose?
Choose the 4-piece inside set, 4-piece outer set, or 8-piece combined inside-and-outer set according to the areas you want to cover.

Can it be used on the rear bumper?
The supplied description references rear bumper protection. Confirm that the surface is smooth, clean, suitably shaped, and clear of sensors or other vehicle functions before applying.

Is it vehicle-specific?
No specific vehicle fitment or dimensions are confirmed. Measure the intended surface and check clearance before ordering.

Choose the coverage set that matches your vehicle and add a clean, textured protective layer to the door sill areas most exposed to daily entry and loading contact.