MG4 EV Center Console and Air Vent Trim, ABS

MG4 EV Center Console Lid and Air Vent Trim

Add a clean accent to selected MG4 EV interior areas with ABS plastic trim pieces for the left-side center-console lid frame, the air vent, or both. The pieces are shaped as visual upgrades for the corresponding positions and install with pre-applied double-sided tape.

Product Features

• Listed for MG4 EV interior trim applications
• ABS plastic construction
• Adhesive-backed installation using double-sided tape
• Designed for the left-side center-console lid frame, air vent trim area, or a combined installation
• Helps refresh the appearance of the original interior panel areas
• Three style options available

Style Options

• Center Console Lid Trim Panel Frame-Rotary Button - Left
• Air Vent Trim Strip
• Center Console Lid Trim Panel Frame-Left+Air Vent Trim Strip

The style names are preserved as listed. The product information does not specify model years, dimensions, finish color, or whether the pieces cover every MG4 EV interior revision. Compare the shape and position with the vehicle before ordering.

Installation

1. Clean the target panel thoroughly and remove dust, oil, wax, and moisture.
2. Dry the surface completely.
3. Test-position the trim without removing the tape backing to confirm the edges, rotary-button opening, vent opening, and panel alignment.
4. Peel off the backing from the double-sided tape.
5. Align the piece carefully and press it evenly into place.
6. Hold the trim firmly for the adhesive to contact the panel, then check that the piece remains flush.

Fitment and Function Check

• Confirm the left-side rotary button remains fully accessible and turns normally after installation.
• Do not cover the air vent opening, airflow direction controls, illumination, sensors, buttons, seams, or panel gaps.
• Make sure the trim does not interfere with the center-console lid opening, surrounding controls, or passenger movement.
• Do not apply the adhesive to loose, wet, dusty, oily, textured, or damaged surfaces.
• Do not force a piece that does not match the original panel shape.

Care

Clean the installed trim with a soft cloth and a mild interior-safe cleaner. Avoid abrasive pads, aggressive solvents, and concentrated heat around the adhesive edges. Inspect the edges periodically for lifting or movement.

Frequently Asked Questions

Which vehicle is listed?
The product is listed for the MG4 EV. Exact model years and interior revisions are not specified.

What is it made from?
The product information describes ABS plastic construction.

What styles are available?
Choose the left rotary-button center-console frame, the air vent trim strip, or the combined left frame and air vent trim strip.

How is it installed?
Clean and dry the panel, test the alignment, remove the double-sided tape backing, and press the trim into the matching position.

Can I remove it without affecting the original panel?
The available product information does not confirm residue-free removal. Check the adhesive and panel surface before installation and apply only when the placement is correct.

A small interior detail can make the cabin feel more deliberate, but take the extra minute to dry-fit each piece. Adhesive trim is much happier when the first placement is the right one.