Rear Trunk Spoiler Carbon Fiber/FRP for 2016–2019 Chevrolet Camaro LS LT RS SS ZL1

Rear Trunk Spoiler for 2016-2019 Chevrolet Camaro LS / LT / RS / SS / ZL1 Coupe — Carbon Fiber, Glossy FRP, or Matte FRP

The sixth-generation Chevrolet Camaro (2016–2019) sits on GM's Alpha platform — a rear-wheel-drive architecture shared with the Cadillac CT5 and ATS, representing Chevrolet's most dynamically refined Camaro in decades. The Gen 6 Camaro's rear trunk lid is a wide, fastback-influenced trunk surface that flows from the Camaro's long coupe roofline into a compact rear deck. A properly profiled rear trunk spoiler at this position adds rear downforce at the trunk lid's trailing edge, sharpens the Camaro's rear stance, and completes the Camaro's aggressive coupe silhouette. This rear trunk spoiler is available in three material finishes to match any Gen 6 Camaro build specification. Drilling and screw installation required. Professional installation strongly recommended.

Choose Your Material

• Carbon Fiber ($1,125.89): Genuine 3×3 twill weave carbon fiber with UV-gloss double-layer clear coat. Real carbon throughout — not ABS with carbon wrap. Recommended for ZL1, SS, and RS builds targeting a premium carbon exterior specification.
• Glossy FRP ($886.99): Fiberglass-reinforced plastic in a high-gloss black finish. Same Gen 6 Camaro fitment at a $239 saving vs carbon. The gloss black finish coordinates with the Camaro SS's available black exterior trim and works as a base for body-color paint match or custom wrap.
• Matte FRP ($841.99): Fiberglass-reinforced plastic in a matte black finish. A $45 saving vs Glossy FRP for owners who prefer a non-reflective rear accent or plan to paint-match the spoiler to a matte exterior color.

Key Features

• Gen 6 Camaro Full Trim Fitment (2016–2019): Engineered for the 2016–2019 Chevrolet Camaro Coupe 2-Door — LS, LT, RS, SS, and ZL1 (ZL1 confirmed 2017–2019). All share the same rear trunk lid geometry. Not for Convertible.
• Three Material Options: Carbon Fiber, Glossy FRP, and Matte FRP — the only rear trunk spoiler in our Camaro range available in all three finish specifications to match any build budget and aesthetic direction.
• Vehicle-Specific Profile: Spoiler profile engineered to follow the Gen 6 Camaro Coupe's rear trunk lid curvature, adding rear downforce at the trunk trailing edge and sharpening the Camaro's rear coupe stance.
• UV-Resistant Finish: UV-gloss double-layer clear coat (CF) or UV-stable surface (FRP) — both resist fading and surface hazing over time on the Camaro's exposed rear trunk spoiler surface.

Product Specifications

Installation Instructions

1. Unbox and inspect the spoiler and all included hardware before installation
2. Clean the rear trunk installation area thoroughly — ensure the surface is dry and free of wax or contamination
3. Place the spoiler on the trunk to confirm position and alignment — do not drill until position is confirmed
4. Mark the drilling positions carefully using masking tape for reference
5. Drill pilot holes at marked positions and install the spoiler with included screws
6. Apply included tape accessories to seal and secure the mounting perimeter
7. Press and secure the spoiler evenly across the full mounting surface after installation
8. Avoid washing the car for 24 hours after installation

Professional installation strongly recommended, especially for drilling.

FAQ

Does this fit the 2016-2019 Chevrolet Camaro Coupe?

Yes — designed for 2016–2019 Chevrolet Camaro Coupe 2-Door (LS, LT, RS, SS, ZL1). All trim levels confirmed.

Does this fit Camaro Convertible?

No — not designed for Camaro Convertible. Coupe 2-Door only.

Does this fit 2020+ Camaro?

Not confirmed for 2020+ Camaro. Contact us with your year and trim for fitment confirmation before ordering.

Is drilling required?

Yes — drilling of the trunk lid is required for screw mounting. Test fit and confirm alignment before drilling. Professional installation recommended.

What material should I choose?

Carbon Fiber for a premium carbon exterior build. Glossy FRP for gloss black theme or paint match base. Matte FRP for matte exterior builds or a more subtle rear accent.

Note: 2016–2019 Camaro Coupe only. Drilling required. Not for Convertible. Contact us with rear trunk photos if your Camaro has an aftermarket trunk lid or previously drilled spoiler holes.

Choose your material and complete your Gen 6 Camaro's rear trunk upgrade — add to cart now.