EGR Valve for Honda Accord Crosstour Odyssey Passport Pilot Ridgeline & Acura Models

Exhaust Gas Recirculation (EGR) Valve for Selected Honda and Acura Applications

Replacement EGR valve for the exact Honda and Acura model-year combinations listed below.

Critical fitment warning: Fitment is model-, year-, engine-, and emissions-system-specific. The source does not provide engine displacement or code, fuel type, federal versus California emissions certification, production-date breaks, connector pin count, valve calibration, flange shape, port diameter, coolant connections, gasket configuration, or formal OE reference numbers. Do not order by Honda/Acura brand or broad year range alone. Confirm the VIN, exact engine, emissions label, production date, original EGR valve number, electrical connector, mounting flange, ports, coolant connections where applicable, and gasket pattern before ordering.

Honda Compatibility

• 2008–2012 Honda Accord
• 2010–2011 Honda Accord Crosstour
• 2012 Honda Crosstour
• 2008–2020 Honda Odyssey
• 2019 Honda Passport
• 2009–2015 Honda Pilot
• 2009–2014 Honda Ridgeline

Acura Compatibility

• 2010–2013 Acura MDX
• 2013–2015 Acura RDX
• 2009–2012 Acura RL
• 2009–2014 Acura TL
• 2010–2013 Acura TSX
• 2010–2013 Acura ZDX

Not confirmed: Other years or models, every engine offered within the listed model years, hybrid applications, diesel applications, or vehicles whose emissions system, original valve, connector, flange, ports, or calibration differ.

Included Component

• 1 EGR valve

The source does not confirm an EGR gasket, O-ring, mounting bolts, coolant seals, hoses, clamps, wiring, connector repair kit, EGR pipe, cooler, or additional installation hardware. Verify the product images and received package before installation.

Specifications Requiring Verification

• Exact engine displacement and code
• Federal or California emissions configuration
• Production date and market specification
• Electrical connector shape and pin count
• Mounting-hole pattern and flange profile
• Exhaust and intake port shape
• Coolant-port configuration, if applicable
• Original valve calibration and reference

Reference Verification

No formal Honda or Acura OE or interchange reference numbers are provided in the source description. Do not use the listing SKU alone as proof of interchange. Match the VIN, emissions label, original valve markings, connector, flange, and ports.

Installation Notes

EGR-system diagnosis and replacement should be performed by a qualified technician. EGR-related fault codes can also be caused by restricted passages, wiring faults, connector damage, vacuum or intake leaks, sensor issues, cooling-system problems, or engine-control faults. Diagnose the complete system before replacing the valve.

Allow the engine and exhaust system to cool. Disconnect the battery when required by the vehicle-specific service procedure. Inspect and clean mating surfaces and EGR passages without allowing debris to enter the intake or exhaust system. Use the correct new gasket or seals where required and follow the specified bolt sequence and torque values. Refill and bleed coolant if any coolant circuit is opened.

After installation, inspect for exhaust, vacuum, and coolant leaks. Clear applicable diagnostic codes, complete any required idle or EGR relearn procedure, and verify commanded versus actual EGR operation with suitable diagnostic equipment. Confirm stable idle and normal operation before road use.

Frequently Asked Questions

Does this fit every engine in the listed models?
The source does not identify engine sizes or codes. Verify the VIN, engine, emissions label, and original EGR valve before ordering.

Does this fit a 2012 Crosstour?
The source lists 2012 under Honda Crosstour, while 2010–2011 is listed as Accord Crosstour.

Is a gasket included?
Gasket and seal inclusion are not confirmed.

Will replacing the valve clear an EGR fault code?
Not necessarily. Restricted passages, wiring, sensors, leaks, or control-system faults can produce similar codes and should be diagnosed first.