Carbon Fiber Front Bumper Lip for 2016-2018 Ford Focus RS MK3
Available in stock (20)
Carbon Fiber Front Bumper Lip for 2016-2018 Ford Focus RS MK3 Hatchback
The Ford Focus RS MK3 (2016–2018) is the third-generation RS — Ford's return to the RS nameplate after a five-year absence, built on the third-generation Focus C2 platform with a 2.3-litre EcoBoost four-cylinder turbocharged engine producing 350 hp, a first-for-RS all-wheel-drive system with Drift Mode, and a completely unique front bumper design shared with no other Focus variant. The MK3 RS front bumper features an enlarged lower central intake, wide lateral air ducts feeding the front brakes, and a deep lower chin that is geometrically distinct from both the Focus ST's front bumper and the standard Focus MK3's front fascia. This carbon fiber front bumper lip is designed and laser-scanned specifically for the MK3 RS's unique front bumper lower chin, adding a forward-projecting carbon lip extension that increases front-axle downforce and reinforces the MK3 RS's already wide, aggressive front bumper profile. Prepreg hand-laid 3×3 carbon fiber with epoxy resin, UV-protective gloss clear coat. Screws included. Professional installation recommended.
- Fits: Ford Focus RS MK3 Hatchback — 2016, 2017, 2018 (all markets)
- Does NOT fit: Ford Focus ST (MK3 or MK3.5) — the Focus ST has a different front bumper design with different lower chin geometry. This lip is engineered for the RS's unique wider lower chin
- Does NOT fit: Ford Focus MK3 Standard (SE / SEL / Titanium) — completely different front bumper
- Does NOT fit: Ford Focus MK4 (2019+) / Focus MK3.5 facelift (non-RS) — different front bumper generation
- Modified bumper: If your MK3 RS has been fitted with an aftermarket bumper or widebody conversion, contact us with front bumper photos before ordering
- Contact us with front bumper photos to confirm factory MK3 RS bumper specification before ordering if unsure
MK3 RS Front Bumper Engineering — Why This Lip is RS-Specific
Ford's engineering team gave the MK3 RS a front bumper that serves the 2.3T EcoBoost's cooling demands and the AWD system's front brake cooling requirements. The result is a front fascia with a deeper and wider lower chin than any other Focus variant — a chin geometry that creates a specific front bumper lower surface profile that this carbon lip is engineered to match. Ford Performance's own accessories for the MK3 RS include a front splitter at this lower bumper chin position, validating carbon or composite aero at the MK3 RS's front chin as a factory Ford Performance upgrade path. This prepreg carbon front lip delivers that front bumper chin aero extension in real carbon fiber on the MK3 RS's unique front fascia.
Key Features
- MK3 RS Factory Bumper — Exclusive Fitment (2016–2018, All Markets): 3D laser-scanned and CAD-engineered specifically for the Ford Focus RS MK3's unique factory front bumper lower chin. NOT for Focus ST, Focus standard MK3, or Focus MK4. Screws included. Professional installation recommended.
- RS-Specific Front Chin Geometry: The MK3 RS's front bumper has a deeper, wider lower chin than any other Focus variant. This carbon lip is engineered to the RS's specific lower chin profile — it will not fit the narrower ST or standard Focus front bumpers.
- Ford Performance Front Splitter Reference: Ford Performance's accessory catalogue for the MK3 RS includes front aero at the lower bumper chin position — factory validation of carbon/composite at the MK3 RS's front chin as a Ford Performance upgrade.
- Prepreg Hand-Laid Carbon Fiber: Authentic hand-laid prepreg 3×3 carbon fiber with epoxy resin. Higher fiber-to-resin ratio than standard wet-lay. UV-protective high-gloss clear coat.
- UV-Resistant High-Gloss Finish: Double-layer UV-protective gloss clear coat — resists fading on the MK3 RS's exposed front bumper lower chin surface.
Product Specifications
| Feature | Details |
|---|---|
| Material | Prepreg 3×3 Weave Carbon Fiber, Hand Laid |
| Finish | High-Gloss UV-Protected Clear Coat |
| Fitment | 2016-2018 Ford Focus RS MK3 — Factory Bumper Only, All Markets |
| NOT Fits | Focus ST | Focus Standard MK3/MK4 | Non-Factory RS Bumper |
| Installation | Self-Tapping Screws Included, Professional Install Recommended |
| Weight | ~5,000 g |
Note: Fits 2016–2018 Ford Focus RS MK3 (factory bumper only, all markets). NOT for Focus ST, Focus standard, or Focus MK4. Screws included. Professional installation recommended.
Add Ford Performance front chin carbon to your MK3 RS's unique front bumper — add to cart or contact us with front bumper photos to confirm factory MK3 RS specification.
Couldn't load pickup availability
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Quick order list
Clients Love Us
Stephanie L.
Ordered the BMW front bumper fog light grille and the fitment was absolutely perfect. Gloss black finish looks factory-fresh and the quality is outstanding. Installation took about 30 minutes — no drilling required. Highly recommend AlchemyRide!
Marcus R.
Fast shipping, great packaging, and the part arrived in perfect condition. The grille fits my F23 like a glove — exactly as described. Customer service was also super responsive when I had a fitment question. Will definitely order again.
David K.
I've bought aftermarket parts from many stores but AlchemyRide stands out for quality and value. The part was well-made, fit perfectly, and the price was very competitive. My BMW looks aggressive and clean — exactly what I wanted.
Jenny T.
Excellent product and super easy to install. The gloss black finish matches my M Sport bumpers perfectly. Shipping was faster than expected and the part was well-packaged. Very happy with my purchase — my car looks completely transformed!