Front Disc Brake Caliper for 1999-2003 Ford F-150, 2004 F-150 Heritage, 1999-2004 Lobo & 2002-2003 Blackwood

Front Disc Brake Caliper for Select Ford and Lincoln Trucks

Replacement front disc brake caliper for the specific Ford F-150, F-150 Heritage, Ford Lobo, and Lincoln Blackwood configurations listed below.

Critical fitment warning: Ford F-150, F-150 Heritage, and Lobo applications require front and rear disc brakes and exclude the 7,700 lb GVW package. The source does not specify left or right side, package quantity, engine, drivetrain, cab or bed configuration, rotor diameter or thickness, piston count or diameter, mounting-bracket style, or production-date breakpoints. Confirm the VIN, model designation, GVWR label, complete brake configuration, required front side, original caliper casting, rotor dimensions, hose connection, bleeder position, and mounting points.

Vehicle Compatibility

Ford

• 1999–2003 Ford F-150 — front caliper; excludes 7,700 lb GVW; vehicles with front disc and rear disc brakes
• 2004 Ford F-150 Heritage — front caliper; excludes 7,700 lb GVW; vehicles with front disc and rear disc brakes
• 1999–2004 Ford Lobo — front caliper; excludes 7,700 lb GVW; vehicles with front disc and rear disc brakes

Standard 2004 Ford F-150 is not listed; the source specifies 2004 F-150 Heritage only.

Lincoln

• 2002–2003 Lincoln Blackwood — front caliper; all models per source

Vehicle year and model alone are not sufficient for Ford or Lobo fitment. Check the GVWR certification label and verify rear disc brakes.

Package Contents

The source identifies a front disc brake caliper but does not explicitly confirm left/right side or package quantity. It also does not confirm a mounting bracket, brake pads, slide pins, hardware, banjo bolt, copper washers, hose, or brake fluid. Review the product images and confirm the required side, quantity, and contents before purchase.

Installation Notes

Brake-system work is safety-critical and professional installation is strongly recommended. Confirm the model designation, GVWR, front/rear disc-brake configuration, and correct front side before installation; the bleeder must be positioned correctly for complete bleeding. Inspect the rotor, pads, hose, mounting hardware, wheel bearing, and opposite-side caliper. Use new sealing washers where required, follow Ford or Lincoln torque specifications, fill with the specified brake fluid, and bleed the hydraulic system completely. Verify a firm pedal, correct wheel rotation, and no leaks, then perform a cautious low-speed brake test in a safe area.

Frequently Asked Questions

Does this fit a standard 2004 Ford F-150?
Not confirmed. The source specifies 2004 F-150 Heritage only.

Does this fit the 7,700 lb GVW package?
No. F-150, F-150 Heritage, and Lobo applications explicitly exclude 7,700 lb GVW.

Does rear brake type matter?
Yes. The listed Ford and Lobo applications require rear disc brakes as well as front disc brakes.

Is this the left or right caliper?
The source does not identify the side. Match the original caliper, hose connection, bleeder location, and mounting points.

Are two calipers included?
The source does not explicitly confirm package quantity. Do not assume a pair from the SKU; review the product images and confirm contents.