Front Left Driver-Side FWD Steering Knuckle Assembly for 2004-2010 Toyota Sienna

Front Left FWD Steering Knuckle Assembly for 2004–2010 Toyota Sienna

Front-left/driver-side steering knuckle assembly for 2004–2010 Toyota Sienna models with front-wheel drive.

Critical fitment warning: This application is restricted to FWD vehicles and the front-left/driver side. The source does not specify engine, trim, ABS configuration, production date, brake package, axle spline, wheel-bearing type, or included subcomponents. Confirm the VIN, FWD drivetrain, left-side position, original knuckle casting, strut and ball-joint mounting points, tie-rod location, caliper bracket spacing, hub/bearing dimensions, axle spline, and ABS sensor arrangement before ordering.

Vehicle Compatibility

• 2004–2010 Toyota Sienna
• Drivetrain: Front-wheel drive (FWD) only
• Position: Front left / driver side

Not confirmed: AWD vehicles, front-right/passenger-side use, specific engines or trims, production-date splits, or any brake, hub, bearing, axle, or ABS arrangement that does not match the original.

Reference Information

No formal OE or replacement reference numbers are provided in the source description. The SKU is an inventory identifier and is not used as proof of OE interchange, included components, or broader fitment.

Package Contents

• 1 front-left/driver-side steering knuckle assembly

The source does not define the assembly’s included subcomponents. Wheel hub, wheel bearing, snap ring, axle nut, ABS sensor, wiring, dust shield, ball joint, tie-rod end, caliper bracket, and mounting hardware are not confirmed as included. Review the product images and received package before disassembly.

Installation Notes

Steering-knuckle service affects steering, braking, wheel retention, suspension geometry, and ABS operation and should be performed by a qualified technician. Compare the replacement with the original before installation, including left-side casting, FWD configuration, strut mounting, ball-joint connection, tie-rod location, caliper mounting, hub and bearing bore, axle opening, dust-shield holes, and ABS sensor routing.

Inspect the wheel hub and bearing, axle splines, ball joint, tie-rod end, strut, brake rotor and caliper, ABS sensor and wiring, and all fasteners. Follow Toyota procedures for bearing or hub transfer, fastener replacement, tightening sequence, and torque values. Do not apply pressing force through bearing rolling elements. After installation, perform a wheel alignment and verify smooth rotation, secure wheel mounting, normal steering and braking, and no ABS or stability-control warning lights before road use.

Frequently Asked Questions

Does this fit an AWD Toyota Sienna?
No AWD fitment is confirmed. The source specifically identifies FWD.

Is this for the passenger side?
No. It is identified for the front-left/driver side.

Are the wheel hub and bearing included?
Hub and bearing inclusion is not confirmed. Check the product images and package contents.

Does it fit every engine offered from 2004–2010?
The source does not provide engine restrictions. Verify the VIN, original knuckle, brakes, hub/bearing dimensions, axle spline, and ABS configuration.