Front Right CV Axle for 2005-2010 Honda Odyssey & 2006-2014 Ridgeline

Front Right CV Axle Shaft Assembly

Front-right, passenger-side CV axle shaft assembly for listed Honda Odyssey and Ridgeline applications.

Critical fitment warning: The source confirms the model-year ranges and front-right position but does not specify engine size or code, transmission, trim, drivetrain, production date, ABS configuration, inner and outer spline counts, compressed length, seal-surface diameter, inboard joint design, or intermediate-shaft connection. Confirm the VIN, front-right position, engine, transmission, drivetrain, original axle number, spline counts, compressed length, ABS design, seal surface, and inner-joint configuration before ordering. Do not rely on year and model alone.

Vehicle Compatibility

• 2005–2010 Honda Odyssey — front right / passenger side
• 2006–2014 Honda Ridgeline — front right / passenger side

Engine, transmission, trim, drivetrain, production-date, and ABS restrictions are not provided. Match the original axle configuration and reference numbers before purchase.

Reference Numbers

44305SHJA01, 44305SHJC01, 44305SJCA01, 44305SJCA11, NCV36577, 664225, 66-4225

Reference numbers are provided for comparison. Match them together with the VIN, engine, transmission, drivetrain, axle dimensions, spline counts, seal surface, ABS configuration, and inner-joint design.

Position and Quantity

• Axle: Front
• Side: Right / passenger side
• Quantity: One CV axle assembly

Package Contents

One front-right CV axle shaft assembly. Axle nut, retaining clips, seals, intermediate shaft, support bearing, brackets, ABS components, transmission or differential fluid, and installation hardware are not confirmed unless shown in the product images.

Installation Notes

CV axle replacement affects steering, suspension, wheel-bearing retention, and transmission or differential sealing; professional installation is strongly recommended. Compare the replacement with the original before installation, including overall and compressed length, inner and outer spline counts, joint and seal-surface diameters, ABS configuration, and inboard connection. Inspect the wheel bearing and hub, ball joint, control arms, tie-rod end, transmission or differential seals, and engine/transmission mounts. Use a new axle nut or retaining hardware where required, follow Honda torque specifications, refill any lost fluid with the specified type, and check for leaks. Do not allow vehicle weight to rest on the wheel bearing while the axle is loose. Complete an alignment check if suspension geometry was disturbed.

Frequently Asked Questions

Which side does this fit?
This is for the front-right, or passenger-side, position.

Does it fit every Odyssey or Ridgeline within the listed years?
Engine, transmission, drivetrain, trim, and production-date restrictions are not stated. Verify the VIN, original reference, axle dimensions, splines, and inboard joint.

Is an intermediate shaft or support bearing included?
Not confirmed. Review the product images and compare the inboard connection with the original setup.

Is an axle nut included?
Not confirmed. Obtain any required single-use hardware before installation.