Infiniti Q50 Rear Diffuser with LED Brake Light 2014–2017 – Gloss Black ABS

Gloss Black ABS Rear Diffuser with LED Brake Light for Infiniti Q50

Add a gloss black accent to the lower rear bumper of your Q50. The visible product information identifies ABS construction and a replacement-style diffuser. An LED brake light is identified in the product title; its electrical specification and complete accessory inventory require confirmation before fitting.

Source-Listed Fitment

• Vehicle: Infiniti Q50.
• Visible year range: 2014–2017.
• Configuration: Replacement for the factory diffuser, as described in the source.

Confirm VIN, production date, actual rear bumper contour, fixing points and exhaust layout before ordering. No separate Base, Sport, Hybrid or Red Sport compatibility map is supplied. Do not assume every trim or bumper conversion fits from the Q50 name alone.

The existing hidden vehicle-filter data lists 2018–2021 applications, which conflicts with the visible 2014–2017 product specification. That filter data is not independent proof of later-year compatibility. Resolve the discrepancy against the actual vehicle and part before purchase; this listing does not establish 2018–2021 fitment.

Material and Finish

• ABS material.
• Gloss black finish.
• Replacement-style lower rear diffuser, not a complete bumper.

This is an ABS product, not carbon fiber. Carbon-related search tags do not establish carbon construction or a carbon-look finish. The source gives no dimensions, material thickness, measured net weight, UV rating or temperature rating. No measured aerodynamic, handling, cooling or weight-saving benefit is established.

The source mentions suitability for coatings and plating, but supplies no preparation procedure or coating compatibility data. Consult a qualified refinisher before altering the finish; do not assume every paint, solvent or plating process is suitable.

LED Brake Light: Verify Before Installation

The title identifies an LED brake light with the diffuser. The detailed description does not document the lamp's mounting status, lens or illumination color, voltage, power draw, connector, pinout, wiring harness, control module or operating pattern. Confirm the actual supplied lamp and electrical requirements before purchase. No plug-and-play, CAN-bus compatibility, error-free operation, flashing mode, waterproof rating or brightness improvement is established.

Have a qualified automotive electrician verify the circuit, polarity, protected power connection and brake-signal compatibility using the correct vehicle and lamp documentation. Do not guess wire colors, splice into an unidentified circuit or assume resistors or coding are required. Route and protect wiring away from exhaust heat, moving parts, sharp edges and water entry paths.

The added lamp must not replace or disable required original brake lights. Verify all original rear lighting, the added lamp's intended operation and any diagnostic warnings after installation. No lighting approval or road-use certification is supplied; verify applicable requirements before road use. Improved visibility or road safety is not promised.

Listed Item and Accessories

• Gloss black ABS rear diffuser; physical piece count is not stated.
• LED brake light identified in the product title; confirm the complete lamp supply and mounting arrangement.
• Self-tapping screws listed in the detailed installation text.

Screw quantities, tape, brackets, clips, wiring harnesses, connectors and electrical accessories are not itemized. Confirm the complete packing list and which original fittings must be retained. Exhaust tips and exhaust-system components are not listed as supplied.

Professional Installation and Clearance

1. Allow the exhaust to cool. Inspect the bumper and original attachment points for damage, repairs or modifications.
2. Trial-fit before drilling or altering any original parts. Check the full contour, end alignment, fixing interfaces and any lamp mounting provisions. Do not force the ABS panel into shape.
3. Verify exhaust opening geometry, tip spacing, projection and safe heat clearance through normal movement and thermal expansion. No exhaust dimensions or universal aftermarket-tip compatibility are supplied.
4. Keep original heat shields, required lamps, reflectors, sensors and towing access unobstructed. Check any fitted hands-free trunk sensor or other rear equipment separately.
5. Verify safe screw locations and inspect behind the mounting surface for wiring and other components before drilling. Included self-tapping screws do not establish no-drill installation.
6. Use the verified fastening procedure without overtightening or distorting the ABS. No torque values or complete mounting diagram are supplied.
7. Have the LED lamp installed and tested by a qualified automotive electrician after its electrical requirements are confirmed.
8. Check panel retention, ground clearance, exhaust clearance and all relevant lighting and equipment functions before driving. Inspect again periodically and after scraping or impact.

Professional installation is recommended. The original no-cutting, no-modification and quick-install statements are not treated as universal guarantees. Do not drive with loose parts, exhaust contact, damaged wiring or lighting faults. The diffuser is not structural bumper reinforcement, crash protection, a step or a lifting point.

Care

Clean the cooled surface with a soft cloth and products compatible with gloss-finished ABS. Avoid abrasive cleaners, strong solvents and high-pressure water directed at lamp seals, electrical connections or mounting joints. Inspect fixings, heat clearance and wiring regularly. A water-ingress rating is not supplied.

Frequently Asked Questions

Is this carbon fiber?
No. The visible specification identifies gloss black ABS.

Are 2018–2021 models verified?
No. Hidden filter entries conflict with the visible 2014–2017 specification and do not establish later-year compatibility.

Are Base and Sport bumpers both confirmed?
No trim-specific map is supplied. Verify the actual bumper and fixing geometry.

Is the LED light plug-and-play?
No connector, pinout or electrical compatibility information is provided. Confirm the lamp specification and use qualified electrical installation.

Does the light flash?
No operating pattern is documented. A flashing mode is not claimed.

Are screws included?
Self-tapping screws are listed. Their quantities and a complete accessory inventory are not supplied.