Infiniti Q60 / Q60S Coupe Carbon Fiber Rear Trunk Spoiler
Available in stock (20)
Carbon Fiber Rear Trunk Spoiler for Infiniti Q60 / Q60S Coupe
Add a defined gloss carbon-fiber accent to the rear trunk profile of your listed Q60 coupe. The molded spoiler follows the trunk-lid contour for a sportier exterior appearance. This is a trunk spoiler, not a roof spoiler, rear diffuser or complete trunk assembly.
Listed Compatibility and Year Difference
- Infiniti Q60 / Q60S Coupe, two-door.
- The detailed compatibility list includes 2017, 2018, 2019, 2020, 2021 and 2022.
- The original introduction and URL specify 2017–2020.
The differing end years remain unresolved. The revised title and SEO omit a blanket year range; 2021–2022 require separate verification rather than confirmation solely from the longer compatibility list. Confirm VIN, production date, regional model designation and actual trunk-lid contour before ordering.
The source does not provide a complete trim-by-year or drivetrain compatibility table. Q60S wording does not by itself confirm every Sport or Red Sport configuration. Match the actual trunk and any existing spoiler equipment. Earlier-generation Q60, Convertible, Q50, other body styles, aftermarket trunk lids and converted bodywork are not confirmed applications.
Material and Finish
- Carbon fiber construction, described in the source as molded.
- Polished gloss surface.
- UV-protected clear coating.
No weave pattern, dry-carbon process, pre-impregnated cloth, curing method, full laminate schedule, dimensions or measured component weight is supplied. A 3×3 weave and dry-carbon manufacture are not claimed. The source's “fully made” wording does not provide an internal laminate specification, so pure-carbon-throughout construction is not independently established.
The original “ten times tougher than steel” statement lacks a specified supporting test and is not carried forward. Quantified weight savings, permanent scratch or fade resistance and protection of the underlying trunk finish are not promised.
Installation and Package Scope
Adhesive tape is listed as included. The source describes a tape-mounted, no-drilling installation. Verify the full attachment procedure for this spoiler and the actual mounting surface; included tape alone does not establish sufficient retention under every condition.
Exact molded piece count, tape quantity and any additional attachment requirements are not itemized. Screws, brackets, lamps, wiring and replacement trunk components are not specified as included.
Fitment and Preparation
Professional fitment assessment is recommended. Test-fit before removing adhesive backing. Check alignment across the center and both ends, full contact with the trunk-lid surface and interference from an existing factory or aftermarket spoiler. Do not stack this spoiler over another part or remove original equipment without a verified procedure.
Prepare clean, dry contact surfaces and follow the adhesive manufacturer's application-temperature, pressure and curing instructions. Inspect paint condition and the bonding suitability of coatings, film or wrap on the contact area. No-special-tools installation, universal no-modification fit and damage-free removal are not guaranteed.
Check full trunk opening and closing movement, clearance to adjacent panels, rearward visibility and access to original equipment. Keep lamps and camera views unobstructed where fitted. The original rear-visibility statement must be assessed on the actual installed vehicle rather than treated as guaranteed.
Confirm secure attachment before driving and recheck according to the installer's guidance. A fixed installation time is not promised. Do not use the spoiler as a trunk handle, lifting point or load-bearing component.
Performance Scope
No supporting test results are supplied for reduced drag, increased downforce, high-speed stability, fuel consumption or driving comfort. Those original claims are not carried forward. This listing describes an exterior styling accessory rather than a verified aerodynamic or handling upgrade.
Frequently Asked Questions
Is 2021–2022 compatibility confirmed?
The detailed list includes those years, but the introduction and URL end at 2020. Verify the individual vehicle and trunk contour before ordering.
Does this fit Q50 or earlier Q60 bodies?
Those applications are not established by the detailed Q60/Q60S Coupe fitment.
Is this dry carbon or 3×3 weave?
Neither specification is supplied. The source identifies molded carbon fiber with a gloss finish.
Are screws included?
Screws are not specified as included. The source lists tape and describes no-drilling installation.
Can it fit over an existing spoiler?
That configuration is not established. Verify the mounting footprint and original equipment before fitting.
Couldn't load pickup availability
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Quick order list
Clients Love Us
Stephanie L.
Ordered the BMW front bumper fog light grille and the fitment was absolutely perfect. Gloss black finish looks factory-fresh and the quality is outstanding. Installation took about 30 minutes — no drilling required. Highly recommend AlchemyRide!
Marcus R.
Fast shipping, great packaging, and the part arrived in perfect condition. The grille fits my F23 like a glove — exactly as described. Customer service was also super responsive when I had a fitment question. Will definitely order again.
David K.
I've bought aftermarket parts from many stores but AlchemyRide stands out for quality and value. The part was well-made, fit perfectly, and the price was very competitive. My BMW looks aggressive and clean — exactly what I wanted.
Jenny T.
Excellent product and super easy to install. The gloss black finish matches my M Sport bumpers perfectly. Shipping was faster than expected and the part was well-packaged. Very happy with my purchase — my car looks completely transformed!