Maserati Levante Base / S Carbon Fiber Rear Bumper Splitters 2016–2020

Carbon Fiber Rear Bumper Splitters for Maserati Levante Base / S

Add gloss woven-carbon accents to the rear bumper area of your Levante. These rear splitter styling components are source-listed in 3x3 weave carbon fiber with a double-layer UV-protected clear finish. Self-tapping screws and tape are listed for installation.

Vehicle Fitment

• Vehicle: Maserati Levante Base / S Sport Utility.
• Source-listed years: 2016, 2017, 2018, 2019 and 2020.
• Explicit exclusions: Levante GTS and Trofeo.

The model and year entries are a combined source list, not a market-specific production calendar. Confirm VIN, production date, trim, actual rear bumper contour and mounting interfaces before ordering. Verify a vehicle described as a 2016 Levante against its production and market identification rather than relying on registration year alone.

The existing URL mentions 2016–2019, while the visible title and detailed table extend through 2020. The detailed 2016–2020 list is retained, subject to actual bumper verification. Later years, other trims and aftermarket bumper conversions are not established applications. Do not assume all Base and S bumper variations share identical attachment geometry.

Material and Finish

• Source-listed 3x3 weave carbon fiber.
• Gloss finish with source-described double-layer UV-protected clear coating.
• Source-described development using 3D design, CNC moulding and vehicle trial installation.

The source does not identify a dry- or wet-carbon process, laminate schedule, backing material, thickness, dimensions or measured net weight. Do not infer those details from the carbon-fiber designation. UV protection does not guarantee permanent fade resistance, and development methods do not guarantee identical fit on every vehicle.

These components provide a carbon styling detail at the rear bumper. No aerodynamic testing or measured weight comparison is supplied, so improved downforce, drag, handling, fuel economy or quantified weight savings are not claimed. They are not structural bumper reinforcement or crash-protection components.

Scope and Listed Attachment Materials

• Rear bumper splitter components; physical piece count and an itemized left/right packing list are not supplied.
• Self-tapping screws.
• Installation tape.

The plural product name and cupwing/winglet wording in the URL do not establish exactly two pieces or a verified left/right pair. Confirm the supplied parts, side coverage, precise mounting positions and relationship to the original bumper before purchase. The source does not establish a complete replacement bumper, full-width diffuser or complete body kit.

Screw quantities, tape grade, pre-application status, additional brackets and an itemized accessory inventory are not documented. Confirm the full packing list and verified mounting procedure. Tape inclusion does not establish that tape alone is sufficient for retention.

Professional Installation

1. Allow the exhaust to cool. Inspect the bumper and fixing areas for damage, repairs or modifications.
2. Identify each supplied component and its intended position. Trial-fit before exposing adhesive or drilling; check the full contour, end alignment and contact area without forcing the composite.
3. Verify clearance from exhaust tips, hot components, wheel travel and ground contact as relevant to the actual mounting position. No exhaust dimensions or heat-clearance specification is supplied.
4. Keep sensors, lamps, reflectors, towing access and any fitted hands-free tailgate equipment unobstructed. Verify relevant functions before and after fitting.
5. Check safe fixing locations and inspect behind the mounting surface for wiring and other components before drilling. Self-tapping screws do not establish no-drill installation.
6. Clean and fully dry compatible adhesive surfaces. Follow the specified tape's application temperature, pressure and full curing requirements.
7. Use the verified fastening arrangement without crushing or overtightening the laminate. No torque values, drilling template or complete mounting diagram are supplied.
8. Check secure retention and all clearances before driving. Inspect periodically and after scraping or impact.

Professional installation is recommended. No perfect-fit, universal no-modification or fixed installation-time guarantee is established. Do not drive with loose components, cracked mounting areas, exhaust contact or interference with vehicle equipment. Do not use these parts as steps, jack points or supports.

Care

Clean the cooled surface with a soft cloth and non-abrasive products compatible with the gloss finish. Avoid strong solvents and high-pressure water directed at bonded edges or mounting joints. Follow adhesive curing instructions before washing. Inspect the finish, laminate and fasteners regularly, particularly after ground contact.

Frequently Asked Questions

Will these fit GTS or Trofeo models?
No. Both are expressly excluded in the source fitment table.

Is 2020 listed?
Yes. The visible title and detailed table include 2020, although the URL ends at 2019. Confirm the actual bumper and mounting interfaces.

Are they supplied as a left/right pair?
No itemized side coverage or physical piece count is supplied. Confirm the packing list rather than inferring a pair from the plural name.

Are these dry carbon?
The source specifies 3x3 weave carbon fiber without identifying a dry- or wet-carbon manufacturing process.

Are screws and tape included?
Both are listed. Quantities and the complete accessory inventory are not supplied.

Is a complete diffuser included?
A full-width diffuser or complete rear bumper assembly is not established by this rear splitter listing.

Do they provide tested aerodynamic gains?
No supporting test data is supplied, so aerodynamic or handling improvements are not claimed.