Mercedes-Benz W213 E63 / E63 S AMG Carbon Fiber Side Skirt Extensions 2021–2024

Carbon Fiber Side Skirt Extensions for W213 E63 / E63 S AMG Sedan

Add a gloss carbon accent along the lower sides of your Mercedes-Benz E-Class sedan. These extensions mount onto the existing side skirts; they are not complete replacement rocker panels, structural sills or load-bearing steps.

Source-Listed Fitment

• Vehicle: Mercedes-Benz E-Class W213 E63 / E63 S AMG.
• Body: four-door sedan.
• Source-listed years: 2021, 2022, 2023 and 2024.
• Source restriction: only for W213 E63 AMG with factory bumper.

The factory-bumper restriction is retained from this side-skirt listing. It does not itself confirm the required side-skirt profile or mounting interfaces. Verify both the original body configuration and the actual side skirts before purchase.

Confirm VIN, production date, market specification and lower-body geometry. The 2021–2024 range is a source application claim, not a VIN-specific fitment determination. In particular, verify a vehicle described as a 2024 model against its actual chassis and production specification; registration year alone does not establish the required W213 application. Compatibility with a successor E-Class platform is not established.

No fitment to E43, E53, Base, non-AMG Sport/AMG-Line, Estate, Coupe, Cabriolet, earlier versions or aftermarket side-skirt conversions is established by this individual listing. Do not transfer compatibility from another W213 extension product.

Material and Finish

• Source-listed 3x3 weave carbon fiber.
• Glass fiber composite reinforcement expressly described in the source.
• High-gloss lacquer with hand and machine polishing.
• Source-described double-layer UV-protected clear coating.
• Source-described development using 3D design, CNC moulding and vehicle trial installation.

This is carbon fiber with glass fiber composite reinforcement, not a documented all-carbon laminate. No dry-carbon or wet-carbon manufacturing classification, laminate thickness, dimensions or measured net weight is supplied. Development and trial fitting do not guarantee identical fit on every vehicle. UV protection does not guarantee permanent fade resistance.

These extensions offer an exterior styling change. No aerodynamic, downforce, drag, handling or fuel-economy test results are supplied, so performance improvements are not promised.

Listed Package Contents

• Carbon fiber side skirt extensions; physical piece count is not specified.
• Installation tape.
• Screws.

The source does not itemize left/right coverage, screw type or quantities, tape grade, pre-application status or additional brackets. Plural wording does not establish an exact two-piece pair. Confirm actual contents and the complete fastening procedure before installation.

Tape inclusion does not mean it is pre-applied or sufficient as the sole attachment method. No self-tapping screw specification or drilling pattern is supplied for this product.

Professional Installation

1. Inspect the existing side skirts and attachment areas for damage, loose fixings, repairs or modifications. Trial-fit before exposing adhesive or making holes.
2. Identify each supplied piece's intended position. Check the entire contour, contact area and end alignment without forcing the laminate or pulling it into shape with screws.
3. Check door movement, wheel clearance, drainage and access to factory lifting and service points.
4. Assess clearance over ramps, driveways and speed bumps, including relevant suspension heights and the extensions' added projection.
5. Confirm the required fastening arrangement and whether drilling is needed. Check behind proposed fixing points for wiring and other components; do not drill structural sills without a verified procedure.
6. Clean and fully dry compatible adhesive contact surfaces. Follow the specified tape's temperature, pressure and full curing requirements.
7. Use the specified hardware and tightening procedure without crushing the carbon laminate. No torque values are supplied.
8. Verify secure retention and all clearances before driving. Inspect periodically and after scraping or impact.

The source describes direct fitment without modification and installation within an hour, but provides no complete procedure to substantiate those outcomes for every configuration. No fixed installation time, perfect-fit or no-drill guarantee is made. Professional installation is recommended.

Do not drive with loose extensions, cracked mounting areas, protruding fasteners or interference with doors or wheels. Do not use these extensions as steps, jack points or supports for a person or vehicle.

Care and Inspection

Clean with a soft cloth and non-abrasive products compatible with the gloss coating. Avoid strong solvents and high-pressure water directed at joints or bonded edges. Follow adhesive curing instructions before washing. Inspect the finish, laminate and attachments regularly, especially after ground contact.

Frequently Asked Questions

Are these complete replacement side skirts?
No. The source describes extensions installed onto the existing side skirts.

Is every vehicle registered in 2024 compatible?
No. Verify the actual chassis, build specification and side-skirt interfaces rather than relying on registration year.

Why is a factory bumper mentioned?
That restriction appears in this product's source and is retained. It does not replace verification of the side-skirt mounting geometry.

Are they pure carbon fiber?
The source specifies carbon fiber reinforced with glass fiber composite. An all-carbon construction is not established.

Are tape and screws supplied?
Yes. Both are listed, but their quantities, screw type and the full fitting procedure are not supplied.

Are exactly two extensions included?
A physical piece count and left/right packing map are not provided. Confirm actual contents before ordering.

Do they improve aerodynamic performance?
No supporting measurements are supplied, so downforce, drag or handling improvements are not claimed.