Mercedes-Benz GLA X156 Carbon Fiber Replacement-Style Hood, 2014–2020
Available in stock (20)
Carbon Fiber Replacement-Style Hood for Mercedes-Benz GLA X156
Bring a gloss carbon-fiber finish to the front of your GLA with this engine bonnet/hood component. The detailed source specifies replacement-style installation, rather than an adhesive surface overlay. The supplied information does not establish a complete ready-to-install hood assembly or list every mounting and closure component.
Listed Vehicle Fitment
- Mercedes-Benz GLA-Class X156 Sport Utility.
- Source-listed models: GLA180, GLA200, GLA250 and GLA45 AMG.
- Years listed: 2014, 2015, 2016, 2017, 2018, 2019 and 2020.
Confirm VIN, production date, regional model year, X156 chassis, trim and the original hood configuration before ordering. This grouped range is not a verified model-by-year or drivetrain-specific compatibility table. Check the chassis particularly for vehicles registered around a generation change; registration year alone is insufficient. Later-generation GLA fitment is not established.
The source does not provide separate pre-facelift/facelift mounting assessments or establish that all standard and AMG configurations share identical hardware. Verify the actual mounting points and equipment on the specific vehicle.
Existing hidden filter entries include 2013 and diesel/CDI/d/GLA220 configurations, together with 4MATIC references. Those entries are preserved for the existing filter system but do not expand the detailed fitment. Applications outside the listed models and 2014–2020 range require separate verification.
Material and Finish
- Specified material: 3×3 weave carbon fiber.
- Gloss surface with a double-layer UV-protected clear coating.
The source does not specify dry-carbon construction, full laminate composition, underside construction, curing method, dimensions or measured panel weight. Weight savings, additional stiffness, aerodynamic improvement and improved cooling are not established by the supplied information.
Replacement Structure and Package Details
The source calls this a replacement-style hood/bonnet component and lists self-tapping screws as included. It does not itemize hinges, latch and striker components, secondary safety catch, gas struts, insulation, seals, washer equipment, vents or other equipment. Their inclusion, transfer requirements and compatibility must be confirmed before purchase.
Exact panel/piece count and screw quantity are not itemized. Tape is not listed. This is not described as an adhesive hood skin, an engine-bay trim cover or a complete front-end conversion kit.
Professional Installation and Closure Safety
Professional body-panel installation and inspection are required for safe fitment. Test-fit and verify mounting structure, hinge alignment, panel gaps, engine-bay clearance and the complete hood closure system before final assembly or modification. Self-tapping screws in the package do not establish that they are suitable for hinge, latch or other safety-critical attachments.
Confirm secure operation of the main latch, secondary safety catch and release mechanism, together with suitable support hardware. Verify any fitted hood sensors, active-hood/pedestrian-protection equipment, seals, washer equipment and insulation requirements. Compatibility with these systems is not documented in the source. Do not bypass safety equipment or assume original hardware can be transferred without checking.
Drilling requirements, adjustment procedures and supplementary retention requirements are not specified. Do not assume bolt-on installation without modification, or improvise attachment points. Do not drive until a qualified installer has verified secure retention, correct closure and unobstructed operation. Recheck fasteners and closure operation according to the installer's instructions.
Frequently Asked Questions
Is this a surface cover fitted with tape?
The detailed source specifies replacement-style installation and included self-tapping screws, not an adhesive overlay. Verify the underside structure and mounting design before ordering.
Is it a complete hood assembly with all hardware?
A complete assembly is not established. Only self-tapping screws are expressly listed; other hardware and equipment requirements need confirmation.
Does it fit every GLA registered from 2014 to 2020?
No blanket compatibility is established. The source lists selected X156 models; verify chassis, model year, mounting points and equipment.
Are diesel and GLA220 models confirmed?
They appear in hidden filter entries but not the detailed model list, so separate verification is required.
Is it dry carbon or guaranteed lighter than the original hood?
Neither a dry-carbon process nor a measured weight comparison is supplied.
Couldn't load pickup availability
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Quick order list
Clients Love Us
Stephanie L.
Ordered the BMW front bumper fog light grille and the fitment was absolutely perfect. Gloss black finish looks factory-fresh and the quality is outstanding. Installation took about 30 minutes — no drilling required. Highly recommend AlchemyRide!
Marcus R.
Fast shipping, great packaging, and the part arrived in perfect condition. The grille fits my F23 like a glove — exactly as described. Customer service was also super responsive when I had a fitment question. Will definitely order again.
David K.
I've bought aftermarket parts from many stores but AlchemyRide stands out for quality and value. The part was well-made, fit perfectly, and the price was very competitive. My BMW looks aggressive and clean — exactly what I wanted.
Jenny T.
Excellent product and super easy to install. The gloss black finish matches my M Sport bumpers perfectly. Shipping was faster than expected and the part was well-packaged. Very happy with my purchase — my car looks completely transformed!