Mercedes-Benz CLA C117 Carbon Fiber Trunk Spoiler 2013–2019
Available in stock (20)
Carbon Fiber Trunk Spoiler for Mercedes-Benz CLA C117
Add a gloss carbon-fiber accent along the rear trunk edge of a compatible CLA C117. The molded spoiler follows the trunk's contour for a defined styling detail, without replacing the complete trunk lid.
Fitment
- Vehicle: Mercedes-Benz CLA-Class C117 Sedan, also referred to as W117 in the original listing.
- Listed designations: CLA180, CLA200, CLA220, CLA250, CLA260 and CLA45 AMG.
- Source-listed years: 2013–2019.
The model list is a combined application range, not confirmation that every designation was available in every year or market. Confirm VIN, build date, regional model designation and the actual trunk lid contour, particularly for CLA260 and vehicles registered near a generation change. A 2019 registration alone does not establish that the car is a C117.
The detailed text identifies the Sedan body, while the hidden vehicle-filter entries use Coupe labels. Match the C117 body and trunk shape rather than treating those labels as evidence of a different compatible body style. X117 Shooting Brake, C118 and other generations are not confirmed applications. Diesel or other regional designations found only in filter data require separate verification.
Check whether the car already has a spoiler, mounting holes, repaired paint or an aftermarket trunk lid. Compatibility with an existing spoiler or its removal footprint is not established. Left-hand-drive and right-hand-drive applications are not separately specified.
Material and Finish
- Molded carbon-fiber spoiler, as described in the source introduction.
- Source-specified 3×3 weave.
- Smooth gloss finish with double-layer UV-protected clear coating.
Dry-carbon manufacture, prepreg construction, a particular curing process and full laminate composition are not supplied. Dimensions and measured spoiler weight are not specified. Permanent resistance to fading, discoloration or scratches is not promised.
Product Scope
This listing is for a rear trunk-edge spoiler, not a roof spoiler or complete trunk lid. Exact package contents and piece count are not itemized. Replacement trunk hardware, seals and tools are not specified as included.
Tape-Based Installation
- Double-sided installation tape is listed as included.
- The source describes installation without drilling.
- Test-fit the full mounting footprint before removing adhesive backing.
- Confirm alignment, edge seating and clearance through the trunk's complete opening and closing movement.
The stated no-drill method depends on correct fit and a suitable bonding surface; it is not a universal guarantee of retention. Do not drill simply to compensate for a mismatched part. Professional installation is recommended if paint condition, existing spoiler removal or attachment security is uncertain.
Prepare clean, dry, compatible surfaces and follow the adhesive manufacturer's temperature, pressure and curing instructions. Verify suitability for any wrap, coating or protection film. Do not assume that included tape bonds securely over residual adhesive or damaged finishes. Confirm that the spoiler does not interfere with trunk operation, nearby equipment or the driver's relevant view. Secure attachment must be checked before driving and rechecked according to the installer's guidance. A fixed installation time is not promised.
Styling and Performance
The visible carbon weave adds a contrasting detail to the rear profile. No aerodynamic test results are supplied, so reduced drag, increased rear downforce, improved high-speed stability and fuel savings are not claimed. Unchanged rearward visibility is not guaranteed for every seating position or installation.
Frequently Asked Questions
Is this a trunk spoiler or a roof spoiler?
It is listed for the rear trunk edge of the CLA C117 Sedan.
Will it fit a 2019 C118?
C118 fitment is not confirmed. Verify the actual C117 platform rather than using registration year alone.
Does it fit the Shooting Brake?
X117 Shooting Brake compatibility is not established by the detailed Sedan application.
Is drilling required?
The source describes double-sided tape installation without drilling. Correct contour matching and adequate bonding still need verification.
Is this dry carbon?
The source describes molded 3×3 carbon fiber but does not establish a dry-carbon manufacturing process.
Couldn't load pickup availability
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Quick order list
Clients Love Us
Stephanie L.
Ordered the BMW front bumper fog light grille and the fitment was absolutely perfect. Gloss black finish looks factory-fresh and the quality is outstanding. Installation took about 30 minutes — no drilling required. Highly recommend AlchemyRide!
Marcus R.
Fast shipping, great packaging, and the part arrived in perfect condition. The grille fits my F23 like a glove — exactly as described. Customer service was also super responsive when I had a fitment question. Will definitely order again.
David K.
I've bought aftermarket parts from many stores but AlchemyRide stands out for quality and value. The part was well-made, fit perfectly, and the price was very competitive. My BMW looks aggressive and clean — exactly what I wanted.
Jenny T.
Excellent product and super easy to install. The gloss black finish matches my M Sport bumpers perfectly. Shipping was faster than expected and the part was well-packaged. Very happy with my purchase — my car looks completely transformed!