Mercedes-Benz W211 Sedan Carbon Fiber Roof Spoiler, 2002–2006 Pre-Facelift

Carbon Fiber Rear-Window Roof Spoiler for Mercedes-Benz W211 Sedan

Add a gloss carbon-fiber accent where the roofline meets the top of the rear window. The source describes this molded roof spoiler as an exterior add-on for the W211 sedan. It is not a trunk-edge spoiler, replacement roof panel or complete rear-window assembly.

Listed Vehicle Fitment

• Vehicle: Mercedes-Benz E-Class W211 Sedan.
• Source-listed years: 2002, 2003, 2004, 2005 and 2006, pre-facelift.
• Model names supplied in the detailed source: E300, E350, E430, E500, E550, E55 AMG and E63 AMG.

The supplied model list requires verification. It is not a verified model-by-year or regional fitment table. In particular, E430, E550 and E63 AMG references must be checked against the stated W211 pre-facelift range before ordering. Do not assume every named model was available or shares confirmed fitment throughout 2002–2006.

Confirm VIN, production date, chassis generation, regional model year, pre-facelift specification and the actual roof/rear-window contour. For 2006 vehicles, verify the specific build and facelift status rather than relying on registration year. The 2002 starting point also requires chassis and regional model-year verification.

The detailed listing specifies Sedan. Estate/wagon, facelift vehicles, other generations and modified roof or glass configurations are not confirmed applications. Hidden filter entries include additional E200 Kompressor, E240, E270 CDI, E280 CDI and E320 references; these do not independently expand the detailed fitment. A general S550 tag is not evidence of S-Class compatibility.

Material and Finish

• Specified material: genuine molded 3×3 weave carbon fiber.
• Gloss finish with a double-layer UV-protected clear coating.

The introductory source calls the construction full carbon fiber, but no laminate schedule, underside specification or curing method is supplied. A dry-carbon process and measured component weight are not established. The clear-coat specification is not a promise of permanent resistance to fading.

Installation Position and Package

The source places the spoiler at the top of the rear window where the roofline ends. Confirm the exact adhesive contact footprint and surface before installation; dimensions and a detailed mounting diagram are not provided.

The roof spoiler and installation tape are listed. Exact molded piece count and tape quantity are not itemized. Screws, brackets, clips, replacement window trim and additional adhesive products are not listed as included.

No-Drill Attachment Guidance

The source describes double-sided-tape installation without drilling or modification. Test-fit before removing adhesive backing or disturbing existing trim. Verify full contact and secure retention on the actual vehicle; included tape does not establish suitability for an incorrect contour or every painted, wrapped, repaired or glass-treated surface.

Clean and dry the contact surface using preparation methods suitable for the actual substrate, then follow the adhesive manufacturer's temperature, pressure and curing instructions. Professional installation is recommended if the mounting surface or fit is uncertain. Do not drill glass, force the spoiler into position or use it to cover a mismatch.

Keep window seals, drainage paths, rear visibility and any fitted lights, antennas or other equipment unobstructed. The original visibility claim must be checked on the actual vehicle. Confirm secure attachment before driving and recheck according to the installer's guidance. Do not use the spoiler as a handle or lifting point.

Performance Scope

This listing describes an exterior styling upgrade. No measured drag, downforce or stability results are supplied, so reduced drag, increased rear downforce and improved handling are not promised. Structural impact protection is not established.

Frequently Asked Questions

Where does this spoiler mount?
The source specifies the upper edge of the rear window at the end of the roofline, not the trunk lid.

Will it fit a wagon?
The detailed source specifies W211 Sedan. Wagon/estate compatibility is not established.

Is every listed engine model confirmed for 2002–2006?
No complete year-by-year table is supplied, and the model list contains references requiring verification against the pre-facelift specification.

Does installation require drilling?
The source describes no-drill double-sided-tape attachment. Verify correct fit and suitable adhesive retention before installation.

Is tape included?
Yes. Installation tape is listed; quantity and additional consumables are not specified.