Mercedes-Benz E-Class W213 Base Sedan Carbon Fiber Front Lip, 2016–2019

Carbon Fiber Front Lip for Mercedes-Benz E-Class W213 Base Sedan

Give the lower front bumper of your W213 Base sedan a gloss carbon-fiber accent. This front bumper lip/chin spoiler is listed for the Base configuration, not the Sport or AMG bumper. It is not a complete replacement bumper or full body kit.

Listed Vehicle Fitment

• Vehicle: Mercedes-Benz E-Class W213 Base Sedan, 4-door.
• Models named in the detailed source: E200, E250, E300, E400 and E500.
• Years listed: 2016, 2017, 2018 and 2019.
• Excluded by the source: W213 Sport/AMG models.

Confirm VIN, production date, regional model year, chassis and the actual front bumper profile before ordering. Engine designation alone does not identify the bumper configuration. A vehicle converted to a Sport, AMG or aftermarket bumper must not be assumed compatible because it originally had a Base trim designation.

The grouped model names and year range are not a verified model-by-year table. E250 and E500 availability and their specific W213/year combinations require verification against the vehicle. Check the chassis particularly for early-range vehicles rather than relying on registration year alone.

Existing hidden filter entries include E350 e, E300 e, E350 d, E450 4MATIC and E400 4MATIC references. These entries are retained for the existing filter system but do not independently confirm those configurations. Hybrid, diesel and drivetrain-specific compatibility require verification. Other body styles, generations and years are not confirmed by the detailed fitment.

Material and Finish

• Specified material: authentic 3×3 weave carbon fiber.
• Construction described in the source: hand-laid carbon-fiber material using pre-impregnated cloth and epoxy resin.
• Gloss finish with a double-layer UV-protected clear coating.

The source does not confirm a dry-carbon curing process, full laminate composition, dimensions or measured component weight. Pre-impregnated cloth alone is not a confirmed dry-carbon specification. Permanent resistance to fading and measured weight savings are not established.

Package and Installation

The front lip, self-tapping screws and installation tape are listed. Exact molded piece count and hardware quantities are not itemized. Brackets, clips, replacement bumper hardware and other consumables are not confirmed as included.

The source does not define a complete add-on versus replacement mounting procedure. Confirm whether any existing lower trim must be removed and how this lip attaches to the actual bumper. Do not assume tape-only attachment, reuse of all factory mounting points or installation without drilling.

Professional installation is recommended. Test-fit all contact surfaces and mounting locations before drilling, removing adhesive backing or modifying trim. Have the installer check clearance behind proposed screw locations so wiring, sensors, ducts and other equipment are not damaged. Do not force the lip onto a mismatched bumper.

Clean and dry adhesive contact surfaces and follow the adhesive manufacturer's application-temperature, pressure and curing instructions. Verify secure mechanical retention and final alignment before driving.

Clearance and Equipment Checks

Check ground clearance and approach clearance at ramps, driveways, speed bumps and parking stops. Actual clearance depends on the vehicle, suspension and installed position; no clearance measurement is supplied.

Keep air openings, lights, tow-access points and fitted sensors unobstructed. Compatibility with every sensor or assistance-system configuration is not documented. Recheck attachment according to the installer's guidance. This lip is not a jacking point or an impact-protection component.

Performance Scope

This listing describes an exterior styling upgrade. No measured lift, downforce, traction, handling or aerodynamic test results are supplied, so those performance improvements are not promised.

Frequently Asked Questions

Will it fit an AMG Line or Sport bumper?
The source excludes W213 Sport/AMG models. Do not assume fitment on an AMG-style bumper based on the engine badge.

Does an E300 badge guarantee fitment?
No. Confirm the W213 Base sedan configuration and actual bumper shape.

Are screws and tape included?
Yes. Both are listed, but quantities and a complete installation procedure are not supplied.

Is installation guaranteed to be no-drill?
No. Self-tapping screws are listed, and drilling or mounting requirements must be assessed before installation.

Is it a one-piece lip or dry carbon?
Piece count and a dry-carbon curing process are not confirmed in the supplied specification.