Mercedes-Benz W213 E63 / E63 S AMG Sedan Carbon Fiber Front Lip 2016–2019

Carbon Fiber Front Lip for Mercedes-Benz W213 E63 / E63 S AMG Sedan

Add a gloss carbon accent to the lower front bumper of your E63 or E63 S AMG sedan. This front lip is listed specifically for the factory E63 AMG bumper, not as a universal W213 accessory or a complete replacement bumper.

Source-Listed Fitment

• Vehicle: Mercedes-Benz E-Class W213 E63 / E63 S AMG Sedan.
• Source-listed years: 2016, 2017, 2018 and 2019.
• Required configuration: factory E63 AMG front bumper.

Confirm the actual VIN, production date, market model year, E63/E63 S specification and lower bumper profile before ordering. In particular, verify the source's 2016 start-year claim against the actual vehicle; a registration year alone does not confirm this application.

The existing URL contains 2017–2020, which differs from the visible title and detailed 2016–2019 fitment. The URL is not a separate compatibility approval, and 2020 fitment is not established here. This listing retains the source's detailed year range with verification required rather than silently extending it.

Base, Sport, E43 and E53 bumpers, facelift conversions, aftermarket replacement bumpers and non-sedan body styles are not established applications. An E63-style appearance on a conversion bumper is not proof of the required factory mounting geometry.

Material and Finish

• Source-listed 3x3 weave carbon fiber.
• Source-described hand-laid construction using pre-impregnated carbon fiber cloth and epoxy resin.
• Gloss clear finish with source-described double-layer UV-protected coating.
• Source-described development using 3D laser scanning, CAD, CNC moulding and vehicle trial fitting.

No verified dry-carbon or wet-carbon process classification, curing cycle, backing specification, laminate thickness, dimensions or measured net weight is supplied. Pre-impregnated cloth wording alone does not establish a specific curing process. Trial fitting does not guarantee identical fit across every listed vehicle, and UV protection does not guarantee permanent fade resistance.

This is an exterior styling component. No aerodynamic test results substantiate reduced front-end lift, increased downforce, improved traction, handling or fuel economy. Those performance outcomes are not promised. The lip is not a crash-protection device or structural bumper replacement.

Listed Package Contents

• Carbon fiber front lip spoiler; physical piece count is not stated.
• Self-tapping screws.
• Installation tape.

The source does not itemize screw quantities, tape grade, pre-application status, mounting templates or additional brackets. Do not assume one-piece or multi-piece construction from the product name. Confirm actual contents and the complete fastening procedure before permanent installation.

Professional Installation

1. Inspect the factory bumper and intended attachment areas for damage, previous repairs or modifications. Trial-fit before removing adhesive liners or drilling.
2. Check the full bumper contour, mounting interfaces, end alignment and contact area. Do not force the lip or use fasteners to pull a mismatched laminate into place.
3. Verify clearance to sensors, cameras, radar fields, cooling openings, towing access and any fitted active components. No equipment-specific compatibility map is supplied.
4. Assess ground clearance over ramps, driveways and speed bumps, including relevant suspension heights. Account for the added projection below the bumper.
5. Confirm the required hole locations and safe attachment surfaces. Check behind them for wiring and other components before using self-tapping screws. Screw inclusion does not establish no-drill fitment.
6. Clean and fully dry compatible adhesive contact areas. Follow the specified tape's temperature, pressure and curing instructions. Do not assume tape alone provides sufficient retention.
7. Use the verified fastening arrangement and tightening procedure without crushing or overtightening the laminate. Torque values and a drilling pattern are not provided here.
8. Check secure retention, clearances and relevant vehicle functions before driving. Inspect attachments periodically and after scraping or impact.

Professional fitting is recommended. No fixed fitting time, perfect-fit guarantee or universal no-modification installation is established. Do not drive with loose pieces, damaged mounting areas or interference with vehicle equipment. Do not use the lip as a step, jack point or support.

Care

Clean using a soft cloth and non-abrasive products compatible with the gloss coating. Avoid strong solvents and high-pressure water directed at bonded edges. Follow adhesive curing requirements before washing. Inspect the finish, laminate and fixings regularly, especially after ground contact.

Frequently Asked Questions

Is this for any W213 bumper?
No. The detailed source specifically requires the factory E63 AMG bumper for the listed E63/E63 S sedan application.

Why must the year be checked?
The detailed source says 2016–2019, while the existing URL contains 2017–2020. Verify VIN, build specification and the actual bumper rather than relying on either year label alone.

Is it confirmed dry carbon?
No. The source describes hand-laid pre-impregnated carbon cloth and epoxy resin without documenting a verified dry-carbon process.

Are screws and tape included?
Yes. Both are listed, but quantities and the complete fitting procedure are not supplied.

How many lip pieces are supplied?
A physical piece count is not specified. Confirm the actual packing list.

Does it produce proven downforce?
No supporting aerodynamic measurements are supplied, so downforce and handling improvements are not claimed.