Mercedes-Benz W213 E43 / E53 / E63 AMG Carbon Fiber Side Skirt Extensions 2017–2020

Carbon Fiber Side Skirt Extensions for Mercedes-Benz W213 AMG Sedan

Add a gloss carbon accent along the lower sides of your W213 with these side skirt extensions. The source describes mounting them onto the existing side skirts for a complementary exterior styling detail. They are extensions, not complete replacement rocker panels or structural sill components.

Source-Listed Fitment

• Platform: Mercedes-Benz E-Class W213.
• Models listed together: E43 AMG, E53 AMG and E63 AMG.
• Body: four-door sedan.
• Combined source year range: 2017, 2018, 2019 and 2020.

The source supplies one combined year range, not a separate year-by-year chart for each AMG model. Do not interpret it as confirmation that every named model was offered or uses identical side skirts in every listed year. Verify VIN, production date, market specification and the actual side-skirt profile before ordering.

Check mounting interfaces, lower contours and any production or facelift changes against the supplied extensions. No separate E63 S compatibility statement is provided. Base, non-AMG Sport/AMG-Line vehicles, Estate, Coupe, Cabriolet, other years and aftermarket side-skirt conversions are not established applications here.

Construction and Finish

• Source-listed 3x3 weave carbon fiber.
• Glass fiber composite reinforcement expressly described in the source.
• High-gloss lacquer with hand and machine polishing.
• Source-described double-layer UV-protected clear coating.
• Source-described development using 3D design, CNC moulding and vehicle trial fitting.

This is carbon fiber with glass fiber composite reinforcement, not a documented all-carbon laminate. No dry-carbon or wet-carbon manufacturing classification, laminate thickness, dimensions or measured net weight is supplied. Development and trial fitting do not guarantee identical fit on every vehicle. The UV-protected finish does not guarantee permanent fade resistance.

The extensions provide a visual styling change. No supporting aerodynamic, downforce, drag, handling or fuel-economy measurements are supplied, so performance improvements are not promised.

Listed Package and Attachment

• Carbon fiber side skirt extensions; physical piece count is not stated.
• Installation tape.
• Screws.

The source does not itemize left/right coverage, screw type or quantities, tape grade, pre-application status or additional brackets. Plural wording does not establish an exact two-piece pair. Confirm the actual packing list, coverage and complete fastening procedure before fitting.

Tape and screws are both expressly listed. Tape inclusion does not establish that it is pre-applied or sufficient as the sole attachment method. No specific self-tapping screw specification or drilling pattern is provided.

Professional Installation

1. Inspect the original side skirts and intended mounting surfaces for damage, loose fixings or previous modifications. Trial-fit before exposing adhesive or making holes.
2. Identify each supplied piece's intended position and check its entire contour, contact area and end alignment. Do not force the laminate or pull a mismatched extension into shape with screws.
3. Check door movement, wheel clearance, drainage and access to factory lifting and service points.
4. Assess clearance over ramps, driveways and speed bumps, including relevant suspension heights. These extensions may project beyond the original lower body profile.
5. Confirm the required attachment points and whether drilling is needed. Check behind intended locations for wiring and other components; do not drill structural sills without a verified procedure.
6. Clean and fully dry compatible adhesive contact areas. Follow the specified tape's temperature, pressure and full curing requirements.
7. Use the specified fastening arrangement and tightening procedure without crushing the carbon laminate. No torque values are supplied.
8. Check secure retention and all clearances before driving. Inspect periodically and after scraping or impact.

The original source describes direct fitting without modification and installation within an hour, but does not supply a complete procedure to substantiate those outcomes for every configuration. No fixed installation time, perfect-fit or no-drill guarantee is made. Professional installation is recommended.

Do not drive with loose extensions, damaged mounting areas, protruding fasteners or interference with doors or wheels. These are not steps, jacking points or load-bearing sill reinforcements; do not use them to support a person or the vehicle.

Care and Inspection

Clean with a soft cloth and non-abrasive products compatible with the gloss coating. Avoid strong solvents and high-pressure water directed at joints or bonded edges. Observe adhesive curing instructions before washing. Inspect the laminate, finish and attachments regularly, especially after ground contact.

Frequently Asked Questions

Are these complete replacement side skirts?
No. The source identifies extensions fitted onto the vehicle's existing side skirts.

Does the year range apply independently to every AMG model?
The source lists E43, E53 and E63 together under 2017–2020 without individual model-year mapping. Confirm the actual vehicle and side-skirt configuration.

Are they pure carbon fiber?
The source specifies carbon fiber reinforced with glass fiber composite. An all-carbon construction is not established.

What weave and finish are specified?
3x3 weave, high-gloss lacquer and double-layer UV-protected clear coating are listed.

Are tape and screws supplied?
Yes. Both are listed, but quantities, screw type and the complete mounting procedure are not supplied.

Are exactly two extensions included?
A physical piece count and left/right packing map are not provided. Confirm actual contents before ordering.

Do they provide proven aerodynamic improvement?
No supporting measurements are supplied, so downforce, drag or handling improvements are not claimed.