Rear Disc Brake Caliper for Select Chrysler, Dodge, Jeep & Mitsubishi Models

Rear Disc Brake Caliper for Select Chrysler, Dodge, Jeep and Mitsubishi Models

Rear disc-brake caliper application for the source-listed Chrysler 200, Cirrus and Sebring; Dodge Avenger and Caliber; Jeep Compass and Patriot; and Mitsubishi Lancer, Outlander, Outlander Sport, and RVR.

Critical fitment warning: The source title provides broad brand-level year ranges, but the description does not map those years to most individual models. Only the Mitsubishi Outlander and Outlander Sport / RVR applications include model-specific years. Do not assume that every listed model fits every year in the title. Confirm the VIN, exact model and model year, engine, drivetrain, trim, production date, original caliper casting and reference number, left or right position, mounting points, hose-port location, bleeder position, piston count, bracket spacing, parking-brake configuration, and rotor specifications before ordering.

Source-Listed Models

• Chrysler 200 — exact model years not mapped by the source
• Chrysler Cirrus — exact model years not mapped by the source
• Chrysler Sebring — exact model years not mapped by the source
• Dodge Avenger — exact model years not mapped by the source
• Dodge Caliber — exact model years not mapped by the source
• Jeep Compass — exact model years not mapped by the source
• Jeep Patriot — exact model years not mapped by the source
• Mitsubishi Lancer — exact model years not mapped by the source
• 2008–2013 Mitsubishi Outlander
• 2011–2012 Mitsubishi Outlander Sport / RVR

The source title separately states broad ranges of 2007–2010 Chrysler, 2008–2014 Dodge, 2007–2017 Jeep, and 2008–2016 Mitsubishi, but it does not assign those ranges to the listed models. The Chrysler 200 entry also creates a conflict with the title-level Chrysler range. For accuracy, use VIN and original-part verification rather than treating the broad brand years as model-specific fitment.

Position and Package Verification

• Brake type: Rear disc brake
• Axle position: Rear
• Exact side: Not specified
• Package quantity: Not specified
• Parking-brake configuration: Not specified
• Caliper bracket: Not separately confirmed
• Brake pads: Not confirmed
• Mounting hardware: Not confirmed

The source does not map reference numbers to rear-left or rear-right. The dual-number SKU does not independently prove that two calipers are included or establish which number belongs to each side. Match the physical component to the original caliper before installation.

The source does not specify caliper material, finish, piston count or diameter, inlet thread, bleeder thread, mounting-bolt spacing, bracket inclusion, parking-brake lever or actuator inclusion, pad hardware, banjo bolt, crush washers, lubricant, brake fluid, or installation fasteners. Confirm the product images and received package before disassembly.

Installation Notes

Professional brake-system installation is strongly recommended. Safely support the vehicle and follow the exact model-, year-, side-, drivetrain-, and brake-package-specific service procedure. Brake fluid can damage painted surfaces; protect surrounding finishes and dispose of fluid according to local requirements.

Before installation, compare the replacement component with the original caliper for left or right orientation, casting, piston and bore arrangement, bracket and slide-pin design, mounting-hole spacing, rotor clearance, brake-hose port, banjo-bolt or threaded fitting, bleeder-screw location, parking-brake mechanism, pad shape, and wheel clearance. The bleeder must be positioned so trapped air can be removed correctly.

Inspect the brake hose, rotor, pads, parking-brake components, wheel bearing, dust shield, mounting bolts, slide pins, seals, and mating surfaces. Replace damaged or manufacturer-designated single-use parts as required. Never allow the caliper to hang from the brake hose. Use new sealing washers where required and keep fluid and lubricant away from friction surfaces.

Install and torque all fasteners and hose fittings to the vehicle manufacturer's specifications. Bleed the brake system using the specified fluid and sequence, restore the reservoir level, and check thoroughly for leaks. Pump the brake pedal until normal firmness is restored before moving the vehicle.

Set, adjust, or calibrate the parking brake as required by the vehicle procedure. Test braking at low speed in a controlled area before road use. Confirm a firm pedal, even braking, normal parking-brake operation, correct wheel rotation, no leaks, no warning lights, and no contact between the caliper, rotor, hose, wheel, or suspension. Follow the pad and rotor manufacturer's bedding procedure when applicable.

Frequently Asked Questions

Does this fit every Chrysler, Dodge, Jeep, or Mitsubishi within the title years?
No. The broad title ranges are not mapped to most individual models. Verify the VIN and original caliper.

Which applications have exact years in the source?
The source specifically lists 2008–2013 Mitsubishi Outlander and 2011–2012 Outlander Sport / RVR.

What years fit the Chrysler 200, Cirrus, or Sebring?
The source lists those models but does not provide reliable model-specific years. The Chrysler 200 entry also conflicts with the broad Chrysler title range.

Is it rear-left or rear-right?
The source does not provide a verified side assignment. Do not determine the side from SKU order alone.

Are two calipers included?
Package quantity is not stated. A dual-number SKU does not independently prove that the package contains a pair.

Is the mounting bracket included?
The source does not separately confirm brackets, pads, banjo bolts, washers, slide hardware, parking-brake hardware, or mounting bolts. Confirm from the product images and received package.

Must the brake system be bled after installation?
Yes. Any time the hydraulic circuit is opened, bleed it using the vehicle manufacturer's procedure and specified brake fluid.