Rear Left or Right 5-Lug ABS Wheel Hub Bearing Assembly for Ford Escape, C-Max & Lincoln MKC

Rear Left or Right 5-Lug ABS Wheel Hub and Bearing Assembly

Rear wheel hub and bearing assembly for the exact Ford Escape, Ford C-Max, and Lincoln MKC model-year applications listed below. This 5-lug unit is identified for either rear side and includes an ABS sensor.

Critical fitment warning: The source confirms rear-left or rear-right use and a 4-hole mounting flange, but it does not specify package quantity, FWD versus AWD, engine, trim, production date, C-Max Hybrid versus Energi configuration, ABS connector pin count, or sensor-wire length. Confirm the VIN, drivetrain, powertrain version, selected side, lug count, original hub reference, 4-hole mounting flange, connector, wire routing, and package contents before ordering.

Vehicle Compatibility

• 2013–2019 Ford Escape
• 2013–2018 Ford C-Max
• 2015–2019 Lincoln MKC

Not compatible or not confirmed: Other model years, front-axle use, non-5-lug configurations, hubs without the matching 4-hole flange, or vehicles whose original mounting pattern, references, connector, and wire routing do not match. FWD/AWD and C-Max Hybrid/Energi interchange are not specified.

Position and Configuration

• Axle position: Rear
• Sides: Left/driver or right/passenger
• Wheel studs: 5-lug configuration
• Mounting flange: 4-hole flange
• ABS sensor: Included
• Quantity: Not specified; verify package contents

Reference Numbers

512499, HA590476

Reference numbers are provided for comparison. A matching number alone does not override drivetrain, powertrain, ABS connector, lug-count, mounting-pattern, production-date, or dimensional differences.

Included Components

• Rear wheel hub and bearing assembly
• ABS sensor

Wheel studs, mounting bolts, axle or spindle nut, seals, dust shield, sensor clips, and other hardware are not separately confirmed by the source. Verify the product images and received package before installation.

Specifications Requiring Verification

The source does not provide flange diameter, flange offset, bolt-circle diameter, pilot bore, spline or bearing-interface dimensions, wheel-stud thread, connector pin count, or ABS-wire length. Compare the replacement with the original hub before installation.

Installation Notes

Wheel-hub service affects braking, wheel retention, ABS operation, alignment, and vehicle stability and should be performed by a qualified technician. Compare the new and original hub for side interchange, bearing or axle interface, flange dimensions, 4-hole mounting pattern, stud pattern, connector, sensor-wire length, clips, and routing.

Inspect the knuckle or carrier, axle or spindle interface, brakes, ABS wiring, seals, and fasteners. Clean mating surfaces and follow the applicable Ford or Lincoln procedures and torque specifications. Route the sensor wire away from moving, hot, and sharp components. After installation, verify bearing operation, wheel runout, ABS warning-light status, wiring clearance, parking-brake operation, and brake function before road use.

Frequently Asked Questions

Can this fit either rear side?
Yes. The source identifies rear-left/driver or rear-right/passenger use.

Is the ABS sensor included?
Yes. The source explicitly states that an ABS sensor is included.

Does it fit both FWD and AWD?
The source does not state drivetrain interchange. Confirm the VIN and original hub configuration.

Does it fit both C-Max Hybrid and C-Max Energi?
The source lists Ford C-Max without defining powertrain versions. Verify the VIN, original reference, mounting flange, and connector before ordering.