Subaru BRZ / Toyota 86 GT86 FT86 / Scion FR-S Carbon Fiber Rear Trunk Spoiler
Available in stock (20)
Carbon Fiber Rear Trunk Spoiler for BRZ, Toyota 86 / GT86 / FT86 and FR-S
Add a gloss carbon-fiber accent to the rear trunk profile of a compatible coupe. The source describes a molded spoiler following the trunk curvature, complementing other exterior carbon trim without claiming a tested aerodynamic upgrade.
Source-Listed Fitment by Model
- Subaru BRZ: 2013–2020.
- Toyota 86 / GT86 / FT86: 2016–2020.
- Scion FR-S: 2012–2016.
These are separate source-listed ranges, not a shared year range for every model. Verify VIN, build date, regional model designation and the actual trunk-lid contour before ordering.
The detailed text lists Toyota from 2016 and FR-S from 2012, while the existing vehicle-filter entries begin at Toyota 2017 and FR-S 2013. These starting-year differences are unresolved. Confirm Toyota 2016 and FR-S 2012 individually rather than relying on the title or filter entries alone.
The source does not provide a complete trim-by-trim compatibility matrix. Check optional original spoilers, mounting holes, trunk trim and special-edition equipment on the actual vehicle. Later generations, GR86, unlisted years and aftermarket trunk lids are not confirmed applications.
Material and Finish
- 3×3 weave carbon fiber.
- Source-described molded carbon-fiber construction.
- Gloss, smooth surface with a double-layer UV-protected clear coating.
Dry-carbon manufacture, prepreg cloth, a specific curing method and complete laminate composition are not supplied. Dimensions, thickness and measured component weight are not provided. Quantified weight savings and permanent resistance to fading or scratches are not claimed.
Product Structure and Package Scope
This is a rear trunk spoiler, not a roof spoiler, replacement trunk lid or complete body kit. Confirm its exact mounting footprint and whether original spoiler removal is required. The source does not establish installation over an existing spoiler, reuse of factory holes or coverage of holes left by previous trim.
The installation specification lists self-tapping screws and tape as included. Exact piece count, hardware quantities, brackets, templates, backing plates and sealing materials are not itemized. Confirm all required attachment materials before fitting.
Installation: Conflicting Source Instructions
The introductory copy describes no-drill attachment with double-sided tape, but the detailed installation specification also lists self-tapping screws. The intended complete fastening procedure is therefore not clear. Do not assume tape-only or drill-free installation; obtain component-specific instructions and have a qualified installer verify the mounting design before any permanent work.
Test-fit before drilling, removing original trim or exposing adhesive backing. Check center alignment, the complete contact footprint, underside access and clearance during trunk opening and closing.
If mechanical fixing is required, the installer must inspect behind proposed holes and determine suitable support, fasteners, corrosion protection and weather sealing. Do not drill blindly into the trunk lid or assume original mounting points match.
For adhesive attachment, prepare clean, dry and compatible surfaces and follow the adhesive manufacturer's temperature, pressure and curing instructions. Paint condition, wraps and coatings can affect adhesion. Included tape alone does not establish sufficient retention for every installation.
Keep lamps, camera views, latch operation, wiring, drainage and service access unobstructed where fitted. Check rearward visibility on the actual installation. Verify secure retention before driving and recheck according to the installer's guidance. Do not use the spoiler as a handle, step or lifting point.
Performance Scope
No supporting drag, downforce, aerodynamic-efficiency or stability test results are supplied. This listing describes an exterior styling accessory, not a verified performance upgrade or motorsport-certified wing.
Frequently Asked Questions
Do all listed models share the same years?
No. BRZ, Toyota and Scion have separate source-listed ranges. The Toyota 2016 and FR-S 2012 entries need particular verification.
Is this dry carbon fiber?
The source specifies molded 3×3 carbon fiber with a gloss coating, but does not establish a dry-carbon process.
Are screws and tape included?
Both are listed in the detailed installation specification.
Is drilling unnecessary?
That is not confirmed. The tape-only introductory text conflicts with the listed screws, so the full attachment procedure must be verified.
Will it cover existing spoiler holes?
Hole coverage and reuse of original mounting points are not established. Inspect the actual trunk and spoiler footprint before fitting.
Couldn't load pickup availability
Your payment information is processed securely. We do not store credit card details nor have access to your credit card information.
Quick order list
Clients Love Us
Stephanie L.
Ordered the BMW front bumper fog light grille and the fitment was absolutely perfect. Gloss black finish looks factory-fresh and the quality is outstanding. Installation took about 30 minutes — no drilling required. Highly recommend AlchemyRide!
Marcus R.
Fast shipping, great packaging, and the part arrived in perfect condition. The grille fits my F23 like a glove — exactly as described. Customer service was also super responsive when I had a fitment question. Will definitely order again.
David K.
I've bought aftermarket parts from many stores but AlchemyRide stands out for quality and value. The part was well-made, fit perfectly, and the price was very competitive. My BMW looks aggressive and clean — exactly what I wanted.
Jenny T.
Excellent product and super easy to install. The gloss black finish matches my M Sport bumpers perfectly. Shipping was faster than expected and the part was well-packaged. Very happy with my purchase — my car looks completely transformed!