Subaru BRZ / Toyota GR86 Carbon Fiber Side Skirt Splitters 2022+

Carbon Fiber Side Skirt Splitters for Subaru BRZ / Toyota GR86

Add a gloss woven-carbon accent to the lower side profile of your Coupe. These side skirt splitters are source-listed for Subaru BRZ and Toyota GR86 applications from 2022+, with tape and screws identified as included attachment materials.

Listed Fitment

• Subaru BRZ Coupe.
• Toyota GR86 Coupe.
• Source-listed year range: 2022+.

The open-ended 2022+ label is not independent confirmation of every later model year, market or trim. Confirm VIN, production date, actual side-skirt shape and mounting interface before ordering. No chassis-code, trim-by-year or special-edition compatibility table is supplied.

Do not extend this listing to earlier BRZ models, Toyota 86/GT86 or Scion FR-S based on related names or tags. Existing aero accessories, aftermarket skirts, body conversions or other modifications may affect the fit. Compare the actual part footprint and end positions with the vehicle.

Material and Finish

• Source-specified 3×3 weave carbon fiber cloth.
• Gloss, smooth finish with source-described double-layer UV-protected clear coating.
• Development described as 3D design, CNC molding and vehicle trial installation.

Dry-carbon or prepreg construction, fiberglass reinforcement, resin chemistry, backing composition, carbon percentage, thickness, dimensions and measured net weight are not specified. Carbon fiber cloth wording does not establish a carbon-only laminate. UV-protection wording is not a promise of permanent gloss or freedom from fading.

No performance test results substantiate added downforce, reduced drag, improved handling or quantified weight savings. These are presented as exterior styling accessories. Development and vehicle trial-fit descriptions do not guarantee fit on every vehicle.

Part Scope and Included Attachment Materials

• Tape is listed as included.
• Screws are listed as included.

The source says screws, not specifically self-tapping screws. Screw types, sizes and quantities, tape specification, pre-application status, brackets and a full packing breakdown are not documented. Do not infer additional hardware or a drill-free installation.

Exact physical piece count, left/right breakdown and section arrangement are not supplied. Plural side skirt splitters wording does not independently confirm a two-piece package. The source does not establish whether the parts extend below, overlay or replace a particular original skirt component. Confirm the actual attachment interface and original trim removal/retention requirements.

These accessories are not structural rocker panels, steps or lifting points. Tape is not a substitute for required mechanical retention, and included screws do not establish a structural mounting design.

Professional Installation Guidance

1. Inspect the supplied parts and verify the actual vehicle configuration. Trial-fit every section before drilling or removing adhesive backing; check full contact, end alignment and panel gaps without forcing the composite.
2. Check door operation, ground clearance and clearance from wheels and moving components. Preserve designated jacking points, drainage and service access.
3. Identify approved fixing points and inspect the substrate behind them. Avoid wiring, lines, protected cavities and structural components. No drilling template, pilot-hole specification or torque values are supplied; obtain the correct procedure instead of improvising.
4. Clean and dry adhesive contact surfaces with products compatible with the vehicle finish and actual tape. Follow the tape manufacturer's preparation, temperature, pressure and curing requirements; no fixed cure time is supplied.
5. Complete the verified fastening method. Stop if contact or retention cannot be established. Do not add improvised screws or use tape to conceal a poor fit.
6. Check secure retention, door clearance and access before driving. Reinspect periodically and after scraping, washing, impact or underside work. Do not drive with loose, lifting, cracked or dragging parts.

Professional installation is recommended. No perfect-fit, no-modification, no-drilling or fixed installation-time guarantee is made. Do not stand on the parts or use them to support or raise the vehicle.

Care

Use a soft cloth and non-abrasive products compatible with the gloss coating. Avoid aggressive solvents and close-range high-pressure water at attachment edges. Observe tape-specific curing and washing restrictions. Inspect the laminate, coating, screws and adhesive edges for damage or loosening.

Frequently Asked Questions

Are both BRZ and GR86 listed?
Yes, both Coupes are listed from 2022+. Confirm the actual skirt profile and mounting interface for the individual vehicle.

Does it fit earlier Toyota 86 or BRZ models?
Earlier applications are not established by this item's 2022+ source fitment.

Is this a full side-skirt replacement?
The original component removal/retention requirements and exact mounting arrangement are not specified. Verify the actual part before purchase.

Are these dry carbon or fiberglass reinforced?
Neither is specified. The source identifies 3×3 carbon fiber cloth and the stated clear coating.

Are self-tapping screws included?
The source lists screws without specifying their type. Do not assume self-tapping screws.

Is tape included and pre-applied?
Tape is listed as included; pre-application is not established.

How many physical pieces are supplied?
An exact piece count and left/right breakdown are not documented.

Can they be used as steps or jacking points?
No. These styling accessories are not load-bearing supports or lifting points.