Carbon Fiber Rear Trunk Spoiler for 2016-2022 Tesla Model 3

Carbon Fiber Rear Trunk Spoiler for 2016-2022 Tesla Model 3 Sedan — 3 Finish Options

The Tesla Model 3's rear trunk lid is one of the cleanest sedan trunk surfaces in the EV segment — a smooth, uninterrupted surface that flows from the Model 3's fastback-influenced roofline into a compact rear deck. The Model 3 Performance ships with a factory trunk spoiler as standard equipment, and the aftermarket has made the Model 3 rear trunk spoiler one of the highest-volume carbon exterior upgrades in the EV segment. This carbon fiber rear trunk spoiler sits at the top rear edge of the Model 3's trunk lid, adding rear downforce at the trunk's trailing edge, reducing rear drag, and completing the Model 3's performance sedan silhouette in genuine carbon fiber. Tape-on installation, no drilling required. Fits all Model 3 variants — Standard Range, Long Range, and Performance.

Choose Your Finish

• Glossy ($199.99): Classic 3×3 twill weave carbon fiber with UV-gloss double-layer clear coat. The most popular Model 3 trunk spoiler finish — gloss carbon weave visible across the full trunk spoiler surface. Recommended for Pearl White, Midnight Silver, and Deep Blue Metallic Model 3 builds.
• Matte ($215.99): 3×3 twill weave carbon fiber with a matte clear coat finish instead of gloss. The carbon weave is fully visible but the surface has no reflective sheen — a more understated carbon aesthetic consistent with stealth or matte-wrapped Model 3 builds. Matte clear coat requires more careful maintenance than gloss.
• Forged Pattern ($197.99): Forged carbon fiber — a random-oriented CFRP construction where chopped carbon fiber strands are compression-moulded rather than woven. The result is a marbled, non-directional carbon pattern that is distinct from the standard twill weave. Lamborghini introduced forged carbon as a factory exterior material on the Sesto Elemento and Aventador J. The forged pattern is unique on each piece due to its random fiber orientation. UV-gloss clear coat.

Model 3 Trunk Spoiler Position

The Model 3's factory Performance trunk spoiler sits at the upper trailing edge of the trunk lid — the point where the roofline airflow separates from the trunk surface. This aftermarket carbon spoiler mounts at the same position, with the spoiler body sitting across the top rear edge of the trunk lid rather than on top of the trunk's flat surface. The squared-off trailing edge profile directs airflow downward at the trunk's trailing edge, increasing rear downforce and reducing the Model 3's rear aerodynamic lift at speed.

Key Features

• Model 3 Full-Variant Fitment (2016–2022): Fits all 2016–2022 Tesla Model 3 Sedan variants — Standard Range, Long Range, and Performance. All share the same rear trunk lid geometry. No-drill tape-on installation. Double-sided adhesive tape included.
• Four Finish Options: Glossy, Matte, Forged Pattern — the most finish-variant Model 3 carbon trunk spoiler in our Tesla range. Choose based on your Model 3's exterior color and build aesthetic.
• Genuine Carbon Fiber Construction: Real carbon fiber construction across all four finishes — not ABS with carbon wrap. Glossy and Matte use 3×3 twill weave; Forged Pattern uses random-orientation compression-moulded CFRP.
• UV-Resistant Finish: UV-protective clear coat (all finishes) resists fading and surface hazing on the Model 3's exposed trunk spoiler surface over time.
• No Drilling, 20-Minute Installation: Double-sided adhesive tape installation — no drilling of the trunk lid required. Installation takes approximately 20 minutes.

Installation Guide

1. Clean the rear trunk lid surface thoroughly — remove all dirt, debris, oil, water, and wax. A clean surface ensures maximum adhesive bond and prevents the spoiler from detaching.
2. Test fit the spoiler on the trunk lid to confirm position and alignment. The spoiler should not move left or right easily when properly positioned. If fitment does not match your trunk lid profile, do not install — contact us before proceeding.
3. Peel the double-sided adhesive tape backing. Do not touch the adhesive surface with bare hands. Optionally warm the adhesive with a hairdryer at low heat (do not exceed 40°C) for improved initial bond strength.
4. Align the spoiler to the confirmed position and press firmly for 20–30 seconds across the full mounting surface.
5. Allow 48 hours drying time before washing the car for maximum adhesive cure.

Note: Fits 2016–2022 Tesla Model 3 Sedan (all variants). Tape-on installation, no drilling.

Choose your finish and upgrade your Model 3's rear trunk edge with genuine carbon fiber — add to cart now.