BYD Seal 6 DM-i / Touring TPE Floor Mats & Trunk Mat Options

TPE Floor Mats and Trunk Mat Options for BYD Seal 6 DM-i / Touring

Choose cabin floor mats, a trunk mat or the combined package to suit your vehicle and coverage needs. The source identifies flexible TPE, or thermoplastic elastomer, with an easy-clean surface. Match the vehicle selection and steering position before ordering, then verify the actual floor and luggage-area layout.

Choose All Three Options

• Select Your Vehicle: Seal 6 DM-i or Seal 6 DM-i Touring.
• Car Model: Left Hand Drive or Right Hand Drive.
• Type: Floor Mats & Trunk Mat, Floor Mats, or Trunk Mat.

The original description focuses on Touring, while the current options also list Seal 6 DM-i. These are separate vehicle selections, not proof that the same molded parts fit both. Confirm the exact vehicle, market, production date, cabin floor shape and cargo-floor configuration. Model years and trim-specific fitment are not supplied.

Left Hand Drive and Right Hand Drive identify the driver's position. Do not interchange driver mats or assume pedal-area contours and retention points match across steering layouts. Select the actual vehicle configuration, not the country where the order is placed.

Package Scope

• Floor Mats & Trunk Mat: The combined cabin floor-mat and trunk-mat selection.
• Floor Mats: The cabin floor-mat selection only; a trunk mat is not established as included.
• Trunk Mat: The luggage-area mat selection only; cabin floor mats are not established as included.

The source does not specify physical piece counts, individual seating-row coverage, separate center sections, seatback protection or sidewall panels. Confirm the packing list for the chosen configuration. Clips, adapters, replacement anchors and other mounting accessories are not itemized as included.

Material and Everyday Use

TPE is listed as the mat material and described as flexible and easy to clean. The mats provide a removable surface layer between everyday dirt and the covered vehicle flooring. Exact thickness, dimensions, edge height, color, surface pattern and material formulation are not documented.

The source describes spill containment and an anti-slip design, but no liquid capacity, waterproof-seal specification or retention test results are supplied. Do not treat the mats as a watertight enclosure or a substitute for correct driver-mat anchoring. Extreme-temperature, odor-free and environmental claims are not supported by stated test methods or certification, so no specific temperature rating, emissions result or environmental certification is promised.

Floor-Mat Installation and Pedal Safety

The source describes place-in installation without seat removal or modification. This does not remove the need to verify fit and secure retention. Follow the vehicle manual and confirmed product instructions.

• Park securely and remove existing loose floor mats before fitting. Never stack the driver mat over another mat.
• Place each mat only in its intended position and steering-layout configuration.
• Verify that the driver mat lies flat and engages the vehicle's compatible original retention system as instructed.
• If the mat cannot be properly secured, or its retention interfaces do not match, do not use it in the driver's footwell.
• With the vehicle safely stationary and secured, check the full travel and free return of every pedal according to the vehicle's instructions.
• Keep mat edges clear of pedals, pedal pivots, seat rails, wiring and floor vents.
• Check seat movement and ensure mats cannot migrate into the pedal area.
• Do not cut, fold or force an incompatible mat into position, or disable retention features to make it fit.
• Recheck position and anchors after cleaning, seat adjustments and normal use.

If a mat curls, shifts, lifts or interferes with a pedal, remove it before driving and resolve the fitment problem. A textured underside or anti-slip claim alone does not prove safe retention.

Trunk-Mat Fitment

Confirm the selected vehicle's cargo-floor shape, floor height and any adjustable-floor position. Check access to underfloor storage, tie-downs, seat latches, required vents and service panels. Verify that the tailgate and any folding-seat mechanisms operate without interference.

Do not cover required access points or use a liner to secure cargo. Use the vehicle's designated load-restraint provisions and keep loads within the vehicle's stated limits. Trunk-mat selection does not establish seatback, bumper-edge or full cargo-sidewall protection.

Cleaning and Care

Remove mats from the vehicle for cleaning. Use mild products compatible with TPE, rinse as appropriate and dry thoroughly before refitting. Remove trapped moisture and debris from the vehicle floor as well. Avoid oily or slippery dressings, particularly on the driver mat, and excessive heat that could distort the material. Inspect for wear, curling and damage to retention interfaces before reuse.

Frequently Asked Questions

Is this only for the Touring?
The description focuses on Touring, but the current vehicle options list both Seal 6 DM-i and Seal 6 DM-i Touring. Choose the correct entry and confirm its actual molded layout.

Are cabin and trunk mats always included together?
No. Select the combined option for both; Floor Mats and Trunk Mat are separate coverage choices.

How many pieces are included?
No physical piece count or row-by-row packing list is supplied. Confirm the selected package contents.

Can I use a left-hand-drive mat in a right-hand-drive car?
Do not assume interchangeability. Select the correct steering layout and verify pedal clearance and retention.

Does anti-slip mean anchors are unnecessary?
No. The driver mat must be correctly retained using the compatible system specified for the vehicle and product.

Are they completely waterproof or certified odor-free?
No sealing specification or supporting odor/emissions certification is supplied. Clean spills promptly and check for moisture underneath.