MG V2L Discharge Adapter, Type 2, 3.5 kW

MG Vehicle-to-Load (V2L) Discharge Adapter

Use the V2L capability of a compatible MG electric vehicle to supply AC power to suitable external equipment. This adapter connects to the vehicle charging socket and provides an AC outlet for approved loads such as camping equipment or emergency-use appliances, subject to the vehicle, socket, and adapter ratings.

Electrical Specifications

• Maximum voltage: 220 V
• Maximum current: 16 A
• Maximum power: 3.5 kW
• Vehicle-side standard: Type 2
• Standard: IEC 62196
• Listed operating temperature: -40°C to +130°C
• Compact design for vehicle-based power use when the vehicle supports the required V2L function

Vehicle Type Options

Select the vehicle type that matches your vehicle and confirm that the exact model, market version, and trim support V2L before ordering. The available vehicle type options are:

• MG4 2022+
• MG S5
• MG4 Urban
• MG IM6
• MG IM5
• MG S9
• MG S6
• MG ZS
• MG Cyberster
• MG HS PHEV

Model-name selection alone does not confirm V2L compatibility. V2L availability can vary by powertrain, market, software, and vehicle configuration. Check the vehicle manual or official specifications before use.

Socket Standard Options

• European Sockets: European socket configuration
• Multi-function Socket (Australia/UK): Socket configuration listed for Australia and the UK

Choose the outlet configuration that matches the equipment you intend to power and the electrical standard of your region. Do not use an incompatible plug, adaptor, extension setup, or load.

Color Options

• Black
• Red

How It Works

After confirming V2L support and selecting the correct configuration, insert the Type 2 discharge connector into the vehicle charging socket and press the vehicle's discharge button as instructed by the vehicle manual. Connect only suitable equipment after the V2L output is active and keep the total load within the lower of the vehicle and adapter ratings.

Important Safety Notes

• For use only with vehicles that support V2L discharge.
• Do not exceed 220 V, 16 A, or 3.5 kW, and follow the vehicle's lower output limit if applicable.
• Check the connected equipment's voltage, current, plug type, and power requirements before use.
• Do not connect damaged plugs, cables, equipment, or vehicle charging sockets.
• Keep the connection protected from water, standing moisture, excessive heat, and physical damage unless the vehicle and equipment instructions specifically permit that environment.
• Do not use this product as a replacement for EV charging equipment. It is intended to draw power from a compatible vehicle's V2L output.
• Stop use if the connector, socket, cable, or adapter becomes unusually hot, smells abnormal, sparks, or shows signs of damage.

Frequently Asked Questions

What vehicle function is required?
The vehicle must support V2L, or vehicle-to-load, discharge. A Type 2 charging socket by itself does not confirm V2L support.

What is the maximum output listed?
The supplied specifications list a maximum of 220 V, 16 A, and 3.5 kW. Actual available output depends on the vehicle and its V2L system.

Which socket standard should I choose?
Choose European Sockets or Multi-function Socket (Australia/UK) according to the equipment and regional outlet standard you need to use.

Which MG models are available as options?
MG4 2022+, MG S5, MG4 Urban, MG IM6, MG IM5, MG S9, MG S6, MG ZS, MG Cyberster, and MG HS PHEV are listed. Verify V2L support for the exact vehicle configuration before ordering.

Can I use it for camping or an outage?
The product information references outdoor camping and emergency power use. Use it only with suitable equipment, in a safe environment, and within the vehicle and adapter ratings.

When your MG vehicle has confirmed V2L capability, this Type 2 adapter provides a practical way to access vehicle-supplied AC power with the correct regional socket configuration.